Fixed-Position: The Sanus Premium Series VML5 fixed-position
wall-mount bracket is perfect for viewing your wall-mounted flat-panel TV at eye
TV Capacity: The Sanus Premium Series VML5 wall-mount bracket is
designed to support flat-panel TVs from 40" to 50", weighing up to 75 lbs.
VESA Bolt Pattern: The VML5 wall-mount bracket
accommodates a horizontal hole spacing on back of the TV of 100mm-400mm and a
vertical hole spacing of 200mm-400mm. The Sanus VML5 comes with M4, M5, M6, and
M8 size bolts of differing lengths to mount the bracket to your TV. It will
accommodate the following VESA hole patterns in accordance with industry
standards set by the Video Electronics Standards Association:
- 200mm x 200mm
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
Note: Additional hardware may be required for your specific
model of TV. For example; shorter or longer screws, thicker or slimmer
washers or spacers. These additional accessories can often be found at your
local hardware store.
Construction: The VML5 bracket is constructed of heavy-gauge
steel with a durable powder-coated black finish.
Perfect Positioning: Your TV can slide from side-to-side on the VML5
wall-mount for perfect positioning on the wall. There is also a level adjustment
screw on top of either TV bracket to raise or lower the sides of the TV.
Note: The wall plate must be mounted to wall studs or
anchored to a brick, block, or concrete wall using the supplied lag bolts
(and wall-anchors). The slots in the wall plate can accommodate wall studs
16" on center.
Safety Tabs: Once the wall bracket is anchored to the wall
studs and the two TV brackets are attached to the back of your television, the
TV brackets hook into the wall bracket. Integrated safety tabs on the TV
brackets provide a safe and easy connection to the wall bracket you can hear.
Click Stands: Built-in ClickStands on each TV bracket
temporarily hold your mounted TV out from the wall for easier cable connections.
Installation Tools: The following tools are recommended for
mounting the VML5:
- Tape measure
- Stud finder/level (included)
- 7/32" Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- TV Brackets:
- Width = 3.0625"
- Height = 10.75"-18.875"
- Depth = 1.0"
- Wall Plate:
- Width = 21.25"
- Height = 5.0625"
- Depth = 0.5625"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.