About the Sanus VisionMount® VMSAB
The Sanus VMSAB mount can support a flat-panel TV with a screen size of up to 65" and weighing up to 150 lbs. You can extend its sturdy, articulated arm to hold your set up to 9-1/2" away from the wall. The mount can tilt, swivel and roll, so it's easy to position your set for optimal viewing.
Sanus' Virtual Axis™ technology allows variable angle adjustment with just the touch of a finger, and the display stays exactly where you aim it — you can lock the position by simply tightening a knob. The VMSAB combines smart engineering with outstanding fit and finish, and includes all necessary mounting hardware.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- designed for flat-panel LCD TVs with screen sizes 37"-65"
- accommodates VESA 200 x 200 and 200 x 100 hole patterns
- supports up to 150 lbs.
- tilt range: +5° to -15° (may vary with size of TV)
- swivel range: +30° to -30° (may vary with size of TV)
- roll control +6° to -6°
- Virtual Axis™ allows smooth tilt motion with the touch of a finger
- extending arm holds TV 2-5/8" to 9-1/2" from wall
- stud-mounting required
- wall plate: 18-5/8"W x 8-13/16"H x 3/4"D
- warranty: 10 years
- MFR # VMSAB
What's in the box:
Sanus VisionMount® VMSAB owner's manual
- Wall plate
- Arm assembly
- 2 Monitor brackets
- 2 Mounting tubes
- 4 Vise assemblies
- 2 Wire tie clips
- 2 Wire tie clip bolts
- 5 Wire ties
- Six 2 1/2" Lag bolts
- 6 Lag bolt washers
- 6 Concrete anchors
- 4 M4x12mm Phillips-head bolts
- 4 M4x30mm Phillips-head bolts
- 4 M5x12mm Phillips-head bolts
- 4 M5x30mm Phillips-head bolts
- 4 M6x12mm Phillips-head bolts
- 4 M6x35mm Phillips-head bolts
- 4 M8x16mm Phillips-head bolts
- 4 M8x40mm Phillips-head bolts
- 4 M4 Star washers
- 4 M5 Star washers
- 4 M6 Star washers
- 4 M8 Star washers
- 8 M4/M5 Washers
- 4 M4/M5 Spacers
- 4 M6/M8 Spacers
- 2 Allen head locking bolts
- Four 2" Carriage bolts
- Four 1/4-20 Lock nuts
- Allen wrench
- Assembly instructions
Customer reviews for Sanus VisionMount® VMSAB
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus VisionMount® VMSAB
Features & specs
| Features | ||
|---|---|---|
| Mount Type | Flat panel TV | |
| Motion | ||
| Tilt | No | |
| Swivel | No | |
| Extend/Retract | No | |
| Fixed | No | |
| Roll (Level) Adjustment | No | |
| Mounting Details | ||
| Wood Stud (Single) | No | |
| Wood Stud (Dual, 16-inch) | No | |
| Wood Stud (Dual, 24-inch) | No | |
| Concrete Block-compatible | No | |
| Recessed Housing | No | |
| Outdoor-rated | No | |
| Motorized | No | |
Product Research
Features
Overview: This Sanus VisionMount bracket is designed to mount most flat panel televisions 37" to 65" and up to 150 pounds on a wall. It allows you to easily tilt, swivel, and extend the TV from the wall without the use of tools.
Construction: The wall-mount bracket is made from solid heavy-gauge steel and extruded aluminum, with a durable powder coated finish.
Bolt Pattern: Each monitor bracket has multiple bolt holes and can accommodate vertical hole spacing (on the back of the TV) from 1" to 17.345". The monitor brackets can slide horizontally on the mounting tubes and the horizontal hole spacing on the back of the TV can range from 6.434" to 26.923". The VMSA comes with M4, M5, M6, and M8 size bolts to mount the brackets to your TV.
VESA Mount: Given the mounting bracket's range of motion, it will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 200mm x 100mm
- 200mm x 200mm
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 200mm
- 400mm x 300mm
- 400mm x 400mm
- 600mm x 400mm
Swivel: The articulated arm permits swiveling at two points and allows the TV to be extended up to 9.5" from the wall for maximum viewing angle. Depending on the size of the TV, it may swivel up to 30° left or right.
Virtual Axis: Once mounted the Virtual Axis fingertip tilting technology provides smooth tilting with the touch of a finger, up to 5° up and up to 15° down.
Roll: After the TV is mounted on the wall, the VMSA bracket allows turning it up to 6° clockwise or counterclockwise (if necessary) to correct for the wall plate not being perfectly horizontal.
Wall Mounting: The bracket must be mounted to two wood wall studs at least 12" apart, or a brick, block, or concrete wall, using the supplied mounting hardware. Required tools: Phillips-head screwdriver, Allen wrench (included), 1/2" Nut driver, Drill, 3/16" drill bit or 1/2" masonry bit.
Cable Management: The two included wire tie clips bolt to the bracket assembly and hold the cables to maintain a clean look.
Dimensions
Wall Plate: Width=18.625", Height=8.775", Depth=0.738"
Monitor Brackets: Width=1.70", Height=18.50"
Mounting Tubes (Horizontal): Length=29.25"
TV Mounting Distance From Wall: Minimum=2.6", Maximum=9.5"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Well built, had to exchange it once 2 of the adjusting screws were to tight. Broke off supplied wrench. Excellent movement directions. The bad is it is very heavy. Weights about 5 times more than my television. Is sturdy enough it could hold a small car on your wall. Defiantly not cheaply built.
RONG from BRUNSWICK OHIO