Overview: This Sanus VisionMount bracket is designed
to mount most flat panel televisions 37" to 65" and up to 150 pounds on a wall. It allows you to easily tilt, swivel, and extend the TV
from the wall without the use of tools.
Construction: The wall-mount
bracket is made from solid heavy-gauge steel and extruded aluminum, with a
durable powder coated finish.
Bolt Pattern: Each monitor
bracket has multiple bolt holes and can accommodate vertical hole spacing
(on the back of the TV) from 1" to 17.345". The monitor brackets can slide
horizontally on the mounting tubes and the horizontal hole spacing on the back
of the TV can range from 6.434" to 26.923". The VMSA comes with M4, M5, M6, and
M8 size bolts to mount the brackets to your TV.
VESA Mount: Given the mounting bracket's range of motion, it
will accommodate the following VESA hole patterns in accordance with industry
standards set by the Video Electronics Standards Association:
- 200mm x 100mm
- 200mm x 200mm
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 200mm
- 400mm x 300mm
- 400mm x 400mm
- 600mm x 400mm
The articulated arm permits swiveling at two points and allows the TV to be
extended up to 9.5" from the wall for maximum viewing angle. Depending on the
size of the TV, it may swivel up to 30° left or right.
Virtual Axis: Once
mounted the Virtual Axis fingertip tilting technology provides smooth tilting
with the touch of a finger, up to 5°
up and up to 15° down.
Roll: After the TV is mounted on the wall, the
VMSA bracket allows turning it up to 6°
clockwise or counterclockwise (if necessary) to correct for the wall plate not
being perfectly horizontal.
Wall Mounting: The bracket must
be mounted to two wood wall studs at least 12" apart, or a brick, block, or
concrete wall, using the supplied mounting hardware. Required
tools: Phillips-head screwdriver, Allen wrench (included), 1/2" Nut driver, Drill, 3/16" drill bit
or 1/2" masonry bit.
Cable Management: The two
included wire tie clips bolt to the bracket assembly and hold the cables to
maintain a clean look.
Width=18.625", Height=8.775", Depth=0.738"
Monitor Brackets: Width=1.70", Height=18.50"
Mounting Tubes (Horizontal):
TV Mounting Distance From Wall:
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.