Tilting Design: The Sanus Premium Series VST4 tilting mount
gives you the best view of your wall-mounted television from the floor or couch.
You'll be able to tilt your TV from -12° to + 12° in order to give you a better
viewing angle of your wall-mounted TV; a tension knob tightens the bracket in
place. Tilting the TV also provides easier access to cable connections on back
of the television.
TV Capacity: The Sanus Premium Series VST4 wall-mount
bracket is designed to support flat-panel TVs from 13" to 39", weighing up to 50
VESA Bolt Pattern: The VST4 wall-mount bracket accommodates
a horizontal hole spacing on back of the TV of 75mm-200mm and a vertical hole
spacing of 75mm-200mm. The Sanus VST4 comes with M4, M6, and M8 size bolts
of differing lengths to mount the bracket to your TV. It will accommodate the
following VESA hole patterns in accordance with industry standards set by the
Video Electronics Standards Association:
- 75mm x 75mm
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm (included extension brackets must be used)
Note: Additional hardware may be required for your specific
model of TV. For example; shorter or longer screws, thicker or slimmer
washers or spacers. These additional accessories can often be found at your
local hardware store.Wall Plate:
The wall plate must be mounted to a single wall stud
or anchored to a brick, block, or concrete wall using the supplied lag
Construction: The VST4 bracket is constructed of heavy-gauge
steel with a durable powder-coated black finish.
Safety Latch: Once the wall bracket is anchored to the wall
stud and the TV bracket is attached to the back of your television, the TV
bracket then hooks into the wall bracket. An integrated safety latch ensures a safe and
Installation Tools: The following tools are recommended for
mounting the VST4:
- Tape measure
- Stud finder/level (included)
- 7/32" Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- Wall Bracket:
- Width = 1.875"
- Height = 6.1875"
- Depth = 0.5"
- TV Bracket:
- Width = 8.6875"
- Height = 7.5625"
- Depth = 1.625"
- 200mm Extension Brackets:
- Width = 1.0"
- Height = 8.875"
- Depth = 0.125"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.