All-Weather TV Wall Mount: The Sanus HDpro Series VXF220 is an
all-weather wall mount that features a rust-resistant coating and stainless
steel hardware that stands up to the elements, making this mount an ideal choice
for indoor or outdoor use. It also features a pre-assembled interface and
strong, ultra-light extruded aluminum wall plate for the quickest, easiest
Capacity: The SANUS HDpro Series VXF220 fits TVs from 42" to 84"
(weight up to 175lbs).
Bolt Pattern: The monitor bracket has multiple vertical
slots and can accommodate vertical hole spacing (on the back of the TV) from
1.968" (50mm) up to 22.047" (560mm). The unit can expand horizontally for larger
TVs. The vertical brackets can slide along the horizontal bars, accommodating a
horizontal hole spacing from 5.314" (135mm) to nearly 36.929" (938mm). The
VXF220 comes with M4, M5, M6, and M8 size bolts of differing lengths to mount
the brackets to your TV. Given the mounting bracket's range of motion, it will
accommodate the following VESA hole patterns in accordance with industry
standards set by the Video Electronics Standards Association:
- VESA 800 x 500
- VESA 800 x 400
- VESA 600 x 400
- VESA 400 x 400
- VESA 400 x 300
- VESA 400 x 200
- VESA 300 x 300
- VESA 300 x 200
- VESA 200 x 200
- VESA 200 x 100
Note: Additional hardware may be required for your specific
model of TV. For example; shorter or longer screws, thicker or slimmer washers
or spacers. These additional accessories can often be found at your local
QuickConnect: The QuickConnect system makes it easy to attach your TV
to the mount's arm assembly and lock it in place in one easy movement. Simply
insert the locking tab on the monitor plate into the opening on the arm assembly
and let it slide downward into place. An audible click will let you know the
parts are correctly assembled. To remove your TV, just push in on the locking
tab to disengage it from the are assembly.
ProSet: Once installed, your TV or wall-mounted furniture may not
appear completely level with its surroundings. ProSet technology lets you make
micro-adjustments to height and level (+/-5°)
after mounting to ensure perfect positioning. The VXF220 arm assembly shifts
left and right on the wall plate for easy TV centering, even with off-center
Full-Motion: It's strong dual arms allow even the largest TVs to
retract and extend (3.4375" to 20.5") from the wall with ease. It also tilts (5°/-15°),
swivels (+/-30°), and pans (+/-180°).
Virtual Axis Tilting Technology: This exclusive patented technology
allows smooth, easy tilting motion by balancing the weight of the TV on itself.
You are able to tilt your TV up or down with just the touch of a finger (not
tools are required to adjust the viewing angle). This helps to easily reduce
glare and reflections caused by lights or windows.
FollowThru In-Arm Cable Channel: This innovative in-arm
cable channel protects and conceals cables the entire length of the extension
arm without inhibiting movement, even through the elbow. This exclusive design
allows mount to extend, retract, and pan with the easiest, most fluid motion
possible. An adjustable tension rig lets you find and keep the perfect position
for you TV.
Wall Mounting: The bracket should be mounted to a wood wall
stud, solid concrete, or concrete block using the supplied wall-mount lag
screws. Required tools include:
- Stud finder
- Phillips-head screwdriver
- Ratchet with 1/2" sockets (or 1/2" box wrench)
- Drill with 7/32" bit for wood stud installations (or 3/8" for masonry)
- Tape measure (ruler)
- Wall Plate: 31.125" (w) x 19.1875" (h) x 1.375"
- TV Bracket: 22.75"-38.5" (w) x 23.75" x 1.6875"
- Articulating Arm: extends 3.4375" to 20.5" from wall
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.