Variety of Sources
Discrete Stereo Amplifier: The TEAC NP-H750 network audio
receiver features a discrete amplifier configuration. This ensures you are
receiving the highest quality audio. This high-quality amp circuitry offers
superb S/N ratio and low distortion ratios to reproduce the most delicate
musical nuances. The TEAC NP-H750's stereo power amplifier is rated at 40 watt x
2 channel in 6 ohms, a 1kHz with 0.5% THD.
Binding Post Speaker Terminals: The network audio receiver
features four binding post terminals to connect a single pair of speakers
between 6-8 ohms. The binding post terminals will accept bar wire (up to 12AWG),
pin-connectors, and banana plugs (single only).
Burr Brown PCM1795 DAC: The NP-H750 incorporates a Burr Brown PCM1795
DAC for digital to analog signal conversion. Typically found in high-end audio
products, this acclaimed premium D/A converter features 32-bit/192kHz processing
for faithful, high-fidelity conversion of various digital audio sources into
High-Performance Parts: The NP-H750 incorporates SILMIC Series
aluminum electrolytic capacitors exclusively developed and manufactured by ELNA
Co., Ltd. for hi-fi audio products. To reduce signal loss in the capacitor, the
NP-H750 uses a 55-μm low-multiplier high-purity cathode foil, delivering
powerful and full-bodied sound.
Mono Subwoofer Output: The NP-H750 is fitted with a mono
subwoofer RCA output to connect a powered sub for extra bass.
Tone Control: The TEAC NP-H750 provides independent Bass &
Treble control (+/-5) to fine tune your music listening. You can also adjust
the balance between the left and right speaker output.
Mute: You can mute the sound of the NP-H750 with a single
press of a button on the remote control.
Headphone Output: The NP-H750 features a front-panel 3.5mm
headphone jack for connection of a set of headphone, so you can privately listen
to your music. No sound will be output from the unit's speaker outputs when
headphones are connected.
Analog Output: The NP-H750 is also fitted with a stereo analog audio
output to connect a recorder for audio dubbing.
Variety of Sources
Network Connection: The TEAC NP-H750 network audio receiver is
equipped with dual network connection methods. There's an Ethernet (RJ-45) port
for direct wired connection to your home network, and there's also built-in WiFi
(802.11b/n) for a wireless connection to your home network with WEP and WPA
security. The unit's network connection lets you listen to Internet Radio and
music stored on your Windows PC.
- vTuner Internet Radio: The TEAC NP-H750 lets you listen to more
than 24,000 Internet radio stations in countless genres from around the
world, anytime and free of charge throughvTuner. You can enjoy music and
talk-radio from a variety of stations. You can search for stations by
Location, Genre, Podcasts, New, Popularity, and Recently Played. Song/artist
information and station identification will be displayed on the unit's
- DLNA Certified: The NP-H750 is DLNA (Digital Living Network
Alliance) 1.5 and Windows 7 compliant for audio streaming. This means, you
can access and enjoy digital music stored on your Windows XP/Vista/7
computer running Windows Media Player 11/12 from the TEAC network audio
receiver. The NP-H750 supports playback of MP3 (8-320kbps; 8-48kHz), WMA
(5-320kbps; 8-48kHz), FLAC (16/24-bit; 8-48kHz), WAV (16/24-bit; 8-48kHz),
and OGG (16-128kbps; 8-48kHz) through DLNA. The unit also supports basic
playback & search functions, as well as song/artist information display of
these music files.
Dual USB Ports: The TEAC NP-H750 features a front-panel USB (type-A)
port for the connection of a USB mass storage class device and a rear-panel USB
(type-B) port for connection of your Windows/Mac computer.
- Front-Panel USB: The TEAC NP-H750 features a
front-panel USB (type-A) port used to connect a USB mass storage class
device; such as your Android smartphone, portable digital audio player, or
USB thumbdrive. The NP-H750 supports playback of MP3 (8-320kbps; 8-48kHz),
WMA (5-320kbps; 8-48kHz), AAC (up to 320kbps; 32-96kHz), FLAC (16/24-bit;
8-48kHz), WAV (16/24-bit; 8-48kHz), and OGG (16-128kbps; 8-48kHz) music
files stored on a compatible USB device formatted in FAT 16/32. Up to 99
folders and 2,000 MP3/WM music files can be recognized. The unit also
supports song/artist information display
of these music files. USB portable devices that can be charged via USB will
be charged when plugged into the unit's USB port.
- Computer Audio Streaming: The TEAC NP-H750 also features a USB (type-B) port
for connecting your Windows PC or Mac computer. The NP-H750 accepts digital
audio source material stored on your computer at sampling frequencies of 32,
44.1, 48, 88.2, 96, 176.4, and 192kHz. The
NP-H750 also supports USB asynchronous mode, which uses its precise internal
clock to control timing and eliminate jitter issues. This allows optimal
playback of high-resolution digital audio files from playlists/libraries in
your iTunes, Windows Media Player, or similar playback programs on your
computer. This unit does not offer control over your computer's music files.
Note: Before using the NP-H750 with your computer, you
will need to download and installthe
dedicate TEAC driver on your Windows PC or MAC. Supported operating
systems included Windows XP (32-bit), Vista (32/64-bit), and 7 (32/64-bit);
as well as Mac OS X 10.6 (Snow Leopard), 10.7 (Lion), and 10.8 (Mountain Lion).
Made for iPod/iPhone/iPad Certified: The TEAC network audio
receiver supports audio playback from iPods, iPhones, and iPads via its
front-panel USB port and built-in AirPlay.
- USB Direct Connection: The unit's front-panel USB port also acts
as a direct connection for select Apple iPods, iPhones, and iPads. The
NP-H750 offers audio playback, remote control, and charging of your
compatible Apple device. You can play stored music or music apps on your
Apple device and navigate your stored music from the unit's remote control.
Song/artist information will still need to viewed on your connected Apple
device. The NP-H750 will start charging your Apple device's battery as soon
as its connected.
- AirPlay: AirPlay lets you stream music directly from your iPod
touch, iPhone, and iPad, or from your iTunes library on your PC or Mac to
the TEAC NP-H750, over your home network connection. By downloading
Apple's Remote app onto your iPod touch, iPhone, or iPad you don't even
need to be in the same room as the NP-H750 or your computer to play, pause,
skip, and stop the songs in your iTunes music library. To use the AirPlay
feature you need a Mac or Windows-based PC running iTunes (10.1 or later)
connected to your wireless home network. Your iPod touch, iPhone, and iPad
must have iOS 4.2.1 or later installed and connected to the same wireless
|Apple Device||Generation||Tested Version||Connection Type||Media Type||Control Type||Display Type||Charge|
AirPlay||Audio||Video||Remote||iPod/iPhone||Song/Artist Info||Track Info |
Note: Apple iPod/iPhone software updates may change
functionality results. If you download a newer software version, you may
need to reset the unit and your iPod/iPhone to regain functionality. If this
doesn't work, you may need to wait until a newer software update is
Analog & Digital Inputs: The TEAC NP-H750 is fitted with both analog
(RCA/3.5mm/Phono) and digital (optical/coaxial) audio inputs.
- Three Analog Inputs: The NP-H750 is fitted with three sets of
stereo analog inputs (RCA, 3.5mm, Phono) for the connection of external
analog audio devices. The stereo RCA input (Aux 1) and Phono input are
located on the rear-panel, while the 3.5mm input (Aux 2) is located on the
front-panel. The Phono input allows connection of a MM-style turntable.
- Two Digital Inputs: The TEAC NP-H750 is fitted with optical
(toslink) and coaxial (RCA) digital inputs for connection of digital audio
sources like your CD, DVD, or Blu-ray player. These digital inputs will
accept two channel linear PCM (not Dolby Digital/DTS).
Aluminum Case: The front-panel is an important design element in
high-quality audio equipment. The NP-H750's front panel, side panel, volume and
multi-jog dials are made of aluminum for durability and refined looks.
Fluorescent Display w/ Dimmer: The network audio receiver
features a front-panel fluorescent display to indicate source selection,
song/artist information, and
menu settings. You can adjust the brightness of the front-panel display.
Remote Control: The TEAC NP-H750 comes with an IR remote
control for wireless operation of the network audio receiver; including Network,
USB, and iPod playback functions.
Playback & Search Functions: The TEAC NP-H750 offers a variety of
playback & search functions for Network, USB, and iPod.
- Folder File/Select: You can scroll the folders and
music files of USB and iPod.
- Fast Forward/Rewind: You can fast forward or rewind
through a part of a music track on USB.
- Previous/Next Track: You are able to skip to the
previous or next music track on Network, USB, and iPod.
- Random: You can play all tracks or a specific folder in
random order for USB and iPod.
- Repeat: You can repeat a single track, all tracks or a
specific folder for USB and iPod.
Alarm Clock w/ Sleep Timer: The NP-H750 features a 12-hour
clock display. This unit can be programmed to turn on at a specified time daily
or only once. In addition to setting the specified time, you can set the
playback source (Aux1/Aux2/iPod/Optical/Coaxial) and volume level of the wake-up
timer. The Sleep Timer function allows the unit to be turned off after a
specified amount of time (10-90 minutes).
Firmware Updates: You are able to download the latest firmware updates
from TEAC onto the NP-H750 through its network connection. Check
TEAC's website for the latest firmware updates. The tested NP-H750 contained
firmware version s9267.10051.0.