2-Ohm Stable: The GTA-802 can be connected to loads with
impedances as low as 2 Ohms; the lower the impedance, the higher the output
- 80 watts x 2 @ 4 ohms
- 130 watts x 2 @ 2 ohms
- 260 watts x 1 @ 4 ohms (bridged)
Controls and Terminals: All the controls and terminals are
conveniently mounted on one side of the amp.
Gain: Adjust the input sensitivity
with this rotary control; the range is 0.2 Volts to 5.0
Volts (line-level) or 0.4 Volts to 10.0 Volts (speaker-level).
Crossover Switch: Choose from high-pass,
low-pass, and off (full range) for the crossover.
Crossover Frequency: The crossover
(low-pass or high-pass) point is continuously variable
from 50 Hz to 200 Hz; the slope is 12 dB/octave.
Q-Tune: Turn the Q-Tune on/off; the
boost is +6 dB at 45 Hz.
Power/Remote: Three set-screw terminals
for connecting power, ground, and remote wires; each terminal
accepts up to 8-gauge wire; the set screws are tightened/loosened
with the supplied 3mm Allen wrench.
Line-level Input: Left and right RCA
jacks for the input signal from the head unit.
Speaker-level Input: Use the included
harness when the receiver has no RCA outputs.
Speaker Output: Two pair of set-screw
terminals provided for connecting the speakers; the terminals
can accept up to 8-gauge wire; the set screws are
tightened/loosened with the supplied 3mm Allen wrench.
GTA-RSL: RJ-14 port; connect an optional
GTA-RSL remote level control (item number065GTARSL, sold separately); the GTA-RSL is only functional when the low-pass
crossover is engaged.
ATO Fuse: A single 30-amp ATO-type fuse
is located between the speaker and power terminals.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.