Woofer: The Boston Acoustics HSi 475 uses a 6-1/2" DCD
(Deep Channel Design) copolymer woofer. The DCD woofer uses a deeply grooved pole
plate that enables the voice coil to travel farther for greater output without
Tweeter: The HSi 475 uses a 1" Kortec dome tweeter.
Kortec is a silky fabric saturated on the underside with a proprietary stiffening
agent. Because the inside surface of the dome is ultra stiff, the tweeter tracks
the signal with ease and produces an excellent transient attack. Simultaneously,
the soft, self-dampening top layer eliminates unwanted resonance, so the sound
is smooth and articulate.
Moisture Resistant: The HSi 475 is well suited for humid
environments like the kitchen or bathroom. Make sure they are positioned so
that moisture cannot collect inside them. They are not designed for locations
where they will be submerged.
Inputs: Spring loaded posts will accept banana plugs (single
or dual) or bare wire up to 12 gauge.
Placement: The HSi 475s can be mounted either vertically or
horizontally. If mounted horizontally, each speaker should be turned so the
tweeters are in the inside. If mounted vertically and the bottom edge is more
than 66" above the floor, invert the speaker so the tweeter is below the
woofer. The speakers should be mounted at least 12" away from a tube-TV
to avoid interference with the picture.
Installation: After a 10" x 7-3/8" cutout is made
(either vertically or horizontally) the speaker is installed into the opening and
held in place with the integral plastic bracket. The required depth to install
the speaker is 3-1/2" from the mounting surface (this includes the thickness
of the drywall). Behind the mounting surface there must be a 1-1/2" clearance
on both ends of the speaker (along the short sides). The mounting wall material
must be at least 3/8" thick for the mounting bracket to work.
Magnetic Grille: The grille is magnetically mounted for easy
Paintable: Both the frame and grille can be painted to match
the ceiling. A plastic paint mask is included to protect the speaker from being
painted as well.
IR Sensor Knockout: The speaker has a knockout molded into
the speaker baffle that will accommodate a standard 1/2" diameter infrared
(IR) sensor for an optional remote IR remote control system.
Optional Bracket: The NCB6 new-construction bracket (sold
separately) can be used to simplify installation in new construction.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.