About the RetroSound R-463N
A vintage fit
A vintage fit
Some cars make it tough to replace your speakers, but RetroSound designed the RetroMod® Series R-463N 4"x6" speakers to fit in just about any vehicle. These speakers use a compact, powerful neodymium magnet structure to keep mounting depth to an amazing 1.35 inches, while still allowing these speakers to handle plenty of power — up to 25 watts RMS. They'll deliver strong performance powered by a car stereo or an outboard amplifier.
RetroSound builds each speaker around a low-carbon, black steel basket, using a polypropylene woofer cone, a Santoprene™ rubber surround, and a Mylar tweeter. Translation? These speakers will stand the test of time in your vehicle, shrugging off damage from moisture or temperature extremes. Whether you're customizing an older vehicle or just looking for some nice replacements, these RetroSound speakers will fit the bill.
Product highlights:
- 4"x6" 2-way speakers (pair)
- polypropylene woofer cone with Santoprene surround
- Mylar dome tweeter
- handles up to 25 watts RMS (50 watts peak power)
- frequency response: 80-21,000 Hz
- sensitivity: 86 dB
- top-mount depth: 1-3/8"
- grilles included
- warranty: 1 year
- MFR # R-463N
What's in the box:
RetroSound R-463N owner's manual
- Two 2-way speakers
- 2 Standard 4x6 brackets
- 2 Grilles
- 2 Grille frames
- Two 16.5' Lengths of speaker wire (each has quick-slides on one end and bare wire on the other)
- Eight 1-1/8" Self tapping screws
- 8 Speed clips
- 2 Strips of grille putty
- Owner's manual
Customer reviews for RetroSound R-463N
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the RetroSound R-463N
Features & specs
General | ||
---|---|---|
Speaker Size | 4X6 | |
Design | 2-way | |
Tweeter Design | Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk | |
Woofer Composition | Polypropylene | |
Woofer Surround | Santoprene Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 86 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 80 - 21k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 25 | |
Peak Power Handling (Watts) | 50 | |
Top-mount Depth (Inches) | 1 7/16 | |
Bottom-mount Depth (Inches) | 1 5/8 | |
Cutout Diameter or Length (inches) | 0 | |
Mounting Height (Inches) | 0.336 | |
Frame Width | 3.828 | |
Frame Length | 6.031 |
Product Research
Features
Woofer: The speakers feature poly cone woofers with Santoprene surrounds.
Tweeters: The tweeters are low profile silk domes.
Neodymium Magnets: The N series speakers feature neodymium magnets. Because neodymium produces a much stronger magnetic field than ferrite (of the same size), the magnet size and mounting depth are substantially reduced.
The RetroSound R-463N replaces these items
Retrosound R-463
- polypropylene woofer cone with Santoprene surround
- Mylar dome tweeter
- 2-80 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Bought these to replace the factory speakers in my son's 2003 S-10. Install was a bit of a pain due to how close the dash speakers are to the windshield. We're happy with the sound though. Audio is crisp and clear.
Darryl from Roxboro, NC