Multi-Purpose Camera: The Accele RVC1150T can be configured
as a rear-view or downward-view camera. It provides you with a clear
wide-angle view of the rear or tow-hitch of your vehicle. This
multi-purpose camera features a IP67 waterproof housing.
Note: Image is always reversed.
Composite Video Connector: The Accele RVC1150T multi-purpose camera features a
standard composite video output (RCA plug) which makes it compatible with
virtually any mobile video monitor featuring a rear view camera input.
Wide Viewing Angle/Low Lux: The RVC1150T's multi-purpose camera offers a 165° vertical and
horizontal viewing angle providing an excellent field of vision behind you in
your vehicle. The multi-purpose camera provides minimum illumination of 0.2 lux.
Parking Assistance: The camera features a three-color grid
to assist backing into a parking space. The grid features green, yellow, and red
lines to help you determine how close you are to an obstacle. The camera does
not have a proximity sensor or audible warning system.
Note: The parking assistance lines are turned off by default. To turn on
the parking assistance lines, you must cut the Green wire loop within the
camera's attached cable. The included instructions state this wire loop is
Blue, but it is not - it is Green.
Mounting Options: The RVC1150T's integrated mounting bracket
allows you to flush-mount this multi-purpose camera to your vehicle. Once the camera is mounted, it is not adjustable. The camera
can be mounted to the underside of your vehicle's rear bumper or other
horizontal surface for a rear view. The camera will need to be mounted with the
lens facing downward on the rear of your vehicle to keep an eye your tow-hitch.
A 23.5mm hole saw is included to drill out a hole for the integrated mounting
Note: A White wire loop within the camera's attached cable switches the
image from "right side up" to "upside down", depending on how you have mounted
the camera. If the camera is mounted from underneath, do not cut the white wire
loop. If the camera is mounted on top, cut the white wire loop.
Connections: The multi-purpose camera features an attached 6'
power/video cable terminated by a proprietary connector. This cable plugs into
the included 22' power/video cable which features a composite video connector
and power/ground wires on the other end. The composite video connector plugs
into your in-dash head unit's composite video-camera input. The power/ground
wires need be connected to your vehicle's 12-volt electrical system.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.