Skip Navigation

Focal Chorus IC 706 V

In-ceiling speaker

Item # 091IC706V

This item is no longer available.

Shop all In-ceiling Speakers


Our take on the Focal Chorus IC 706 V

One listen, and you can tell Focal's Chorus IC 706 V in-ceiling speaker is something special. This bad boy was built to deliver no-apologies, soul-satisfying sound without sacrificing valuable space. Install a pair for a music system that offers low visual impact with a serious sonic kick.

Amazing sound from above

One listen, and you can tell Focal's Chorus IC 706 V in-ceiling speaker is something special. This bad boy was built to deliver no-apologies, soul-satisfying sound without sacrificing valuable space. Install a pair for a music system that offers low visual impact with a serious sonic kick.

Advanced driver design for natural, high-definition sound

Chorus 700 series in-wall and in-ceiling speakers boast Focal's renowned 1" TNV aluminum/magnesium inverted dome tweeter. Inverting the dome optimizes the connection between the voice coil and the dome, maximizing efficiency and precision. Plus, the tweeter's rotating design lets you direct the highs where you need them for better stereo imaging. There's also a level adjustment switch for fine-tuning the tweeter's output, providing maximum placement flexibility and performance.

The speakers' tight, responsive bass and dynamic midrange come courtesy of Focal's 6-1/2" Polyglass woofer. These drivers are created by depositing a layer of hollow silica glass microbeads over a layer of cellulose pulp. This unique material combines the warm sound of cellulose fiber with the incredible strength of glass, for a stiff-yet-lightweight cone that responds rapidly with extremely low resonance. A butyl rubber surround helps stabilize cone movement and provides excellent long-term reliability. Tying the drivers together is Focal's OPC (Optimum Phase Crossover) crossover network for precise, natural, and stable imaging and soundstaging.

Built in-house for better quality and value

The drivers in every Chorus speaker are built in-house at their facilities in Saint-Etienne, France. Why is that important? Because it gives Focal complete control over every aspect of design, manufacture, and quality control — resulting a consistently superior, high-value product.

Got wire?

Most speakers don't include any. Learn more about in-wall wiring.
Shop our selection of in-wall speaker wire.

Product Highlights:

  • 1" TNV aluminum/magnesium alloy inverted dome tweeter
  • 6-1/2" Polyglass woofer
  • handles up to 150 watts
  • frequency response: 65-28,000 Hz (±3dB)
  • sensitivity: 89 dB
  • 8-ohm impedance
  • built-in Autoreset Polyswitch fuse protects speaker from overloads
  • rotating tweeter for control of high-frequency dispersion
  • tweeter level adjustment switch for more flexible speaker placement
  • paintable grille and speaker frame
  • frame dimensions: 9-15/16 diameter
  • cutout dimensions: 8-11/16" diameter
  • mounting depth: 3-11/16"
  • warranty: 5 years
  • Our 60-day money-back guarantee

What's in the Box:

  • In-ceiling speaker
  • Grille
  • Logo
  • Paint shield
  • Installation template
  • User Manual

Hands-on research

Features and Specs

Quantity in Package Single
Tweeter Inverted dome
Midrange Size N/A
Woofer Size 6.5
Cutout Size 8.6875
Woofer Composition Polyglass
Woofer Surround Rubber
Power Range (Watts) 10-75
Sensitivity 89 dB
Impedance (Ohms) 8
Frequency Response 65-28KHz
Connector Type Spring post
Bi-Amp Inputs No
Enclosure Type In-ceiling
Parts Warranty 5 Years
Labor Warranty 5 Years

Product Research


In-Ceiling Loudspeaker: The Focal Chorus IC 706 V in-ceiling loudspeaker is suitable for use in a multichannel home theater as a surround speaker, in a stereo application for the bedroom/kitchen/den, or in a hallway as part of a distributed audio system.

Adjustable Inverted Dome Tweeter: The Focal Chorus IC 706 V features a single 1" TNC inverted-dome tweeter made of aluminum and magnesium alloy. The inverted-dome technology allows optimal energy transfer and wide dispersion. The aluminum/magnesium makeup guarantees exception performance in terms of stiffness and damping, thus ensuring a subtle blend of softness and dynamics. You can angle and swivel the tweeter to aim the high frequencies at your listening area. You can also adjust the level of the tweeter to -3dB, 0dB, or +3dB.

Polyglass Cone Woofer: The Focal Chorus IC 706 V features one 6.5" polyglass woofer. The Polyglass cone woofer has been a Focal tradition for the last 30 years. This cellulose fiber cone woofer offers renowned lightness and damping characteristics. But its Focal's special surface treatment of silica micro-balls which gives the woofer a huge increase in rigidity for a negligible increase in mass. The definition and dynamic capacity of this cone, when combined with a very powerful magnet, generate a very fine reproduction, with an exceptionally rich midrange/midbass.

Optimum Phase Crossover: The Focal Chorus IC 706 V in-ceiling loudspeaker utilizes an Optimum Phase Crossover (OPC) to seamlessly blend the audio output of the tweeter and midrange/midbass driver for a precise, natural, and stable soundstage and image.

Wall Boost Circuitry: To reduce the "wall effect" inherent to any built-in speaker, Focal has developed a wall boost equalization circuit which corrects this phenomenon and makes it easier to position your speaker to suit your preference.

ABS Chassis w/ Aluminum Grille: The Focal Chorus IC 706 V in-ceiling speaker features an ABS chassis and aluminum grille. The speaker is only available in a white finish. However, the frame and grille can be painted to match your wall. A plastic paint mask is included to protect the speaker components from being painted as well.

Spring Posts: The Chorus IW 706 V is fitted with a pair of spring posts that will accept bare wire (up to 10AWG), pin connectors, and banana plugs (single/dual). The spring posts are color-coded for easy identification between positive (red) and negative (black).

Mounting Options: The Focal Chorus IC 706 V can be mounted in-ceiling using the four integrated rotating clamps. An installation template is supplied to help you cut your hole. The in-ceiling speaker has an overall measurement of 9.9375" in diameter x 3.9375" in depth. It requires a cut-out of 8.6875" in diameter and a mounting depth of 3.6875" behind the wall surface. The speaker only protrudes 0.1875" from the wall. Focal's KITMOIC706V new-construction bracket (091ICIK706, sold separately) can be used to simplify installation in new construction.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.