Skip Navigation

Focal Integration IS 165

6-3/4" component speaker system

17 Reviews

Find what fits your vehicle

Can't find your exact vehicle?

Item # 091IS165

This item is no longer available.

Shop all Component Speakers

Overview

Our take on the Focal Integration IS 165

Focal applies the same technology they use in their studio and audiophile-grade home systems to their Integration line of car speakers. The Integration IS 165 component system features 6-3/4" woofer cones made from Polyglass, a material that combines the warm sound of cellulose with the strength of glass, for a woofer that plays accurately with no added resonances.

Focal applies the same technology they use in their studio and audiophile-grade home systems to their Integration line of car speakers. The Integration IS 165 component system features 6-3/4" woofer cones made from Polyglass, a material that combines the warm sound of cellulose with the strength of glass, for a woofer that plays accurately with no added resonances.

Adjustable tweeter
The separate Integration processed aluminum inverted dome tweeter features a built-in phase plug and wave guide, which act together to increase the power of high-frequency notes and improve the stereo soundstage. You can also tilt the tweeter for better imaging in many vehicles.

Built-in crossover networks
The crossover networks are built-in, so you don't have those extra boxes to install. Integration speakers allow you to put Focal sound quality and construction into your vehicle, so you can enjoy a dramatic jump in performance over your old speakers.

Note: Focal describes this model as a 6-1/2" speaker. Most manufacturers designate this same frame size as a 6-3/4" speaker. For simplicity's sake we list it as a 6-3/4" speaker.

These have awesome sound quality. Great detail...

Anonymous, eau claire, wi

What's in the Box:

  • Two 6-3/4" Woofers
  • Two inverted dome tweeters (with 18" length of speaker wire attached)
  • 2 Surface mount tweeter housings (installed)
  • 2 Angled surface mount tweeter housings
  • 2 Woofer grilles
  • 2 Grille mounting rings
  • 2 Foam woofer gaskets
  • 8 Speed clips
  • Four 7/8" Flathead screws
  • Eight 1" Self-tapping screws
  • Owner's manual (English/ French)
  • Focal window sticker

Product Highlights:

  • component speaker system includes two 6-3/4" woofers, 2 tweeters, and 2 woofer grilles
  • Polyglass woofer with butyl rubber surround
  • processed aluminum inverted dome tweeter
  • built-in crossovers
  • 4-ohm impedance
  • 5-70 watts RMS power range (140 watts peak)
  • frequency response: 60-20,000 Hz
  • sensitivity: 92.6 dB
  • woofer top-mount depth: 2"
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Focal Integration IS 165 Reviews

Average Customer Review(s):

(17 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

General
Speaker Size 6 3/4
Design 2-way
Tweeter Design Inverted Dome
Tweeter Composition Aluminum
Woofer Composition Polyglass
Woofer Surround Butyl Rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) N/A
Sensitivity at 2.83 volts 92.6
Frequency Response 60 - 20k Hz
Minimum RMS Wattage 5
Maximum RMS Wattage 70
Peak Power Handling (Watts) 140
Impedance (Ohms) 4
Top-mount Depth (Inches) 2
Bottom-mount Depth (Inches) 2 1/8
Cutout Diameter or Length (inches) 5 5/8

Product Research

Woofer
Tweeter
Crossover

Woofer

Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.

Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.

Tweeter

Inverted Dome Tweeter: The tweeter is an inverted aluminum dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.

Mounting Options: The tweeters can be surface mounted and include two types of surface mount housings, one low profile and one angled:

  Flush Mount Low Profile Surface Mount Angled Surface Mount
Mounting Height 0.292" 0.908" 1.935"
Mounting Depth 0.511" 0.885" (screw depth) 0.8" (screw depth)
Frame Diameter 1.886" N/A N/A
Cutout Diameter 1.677" N/A N/A
Width N/A 1.887" 1.892"
Surface Depth N/A 1.887" 2.865"

Crossover

Crossovers: Each woofer and each tweeter has an integrated 6 dB/octave crossover. Because the woofer and tweeter crossovers are separate, the system can be bi-amped.

Note: No crossover point frequency specifications are provided.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Articles