Skip Navigation

Focal Integration ISS 200

8" component speaker system

1 Review | 2 questions - 2 answers

Find what fits your vehicle

 
 
 
 

Can't find your exact vehicle?

Item # 091ISS200

In Stock

Outlet: Open Box

Was: $199.99

Outlet Savings: -$10.00

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Overview

Our take on the Focal Integration ISS 200

Focal applies the same technology they use in their studio and audiophile-grade home systems to their Integration line of car speakers. This Integration ISS 200 component system is designed for the car audio enthusiast who doesn't mind making alterations to the vehicle in order to get first-rate sound quality. The system's oversized 8" woofers feature cones are made of Polyglass, a material that combines the warm sound of cellulose with the strength of glass, so they play music accurately with no added resonances.

Focal ISS 200 8" 2 way component speakers

You can use this angled tweeter mount to improve high-frequency dispersion in problem vehicles.

Audiophile-grade engineering

Focal applies the same technology they use in their studio and audiophile-grade home systems to their Integration line of car speakers. This Integration ISS 200 component system is designed for the car audio enthusiast who doesn't mind making alterations to the vehicle in order to get first-rate sound quality. The system's oversized 8" woofers feature cones are made of Polyglass, a material that combines the warm sound of cellulose with the strength of glass, so they play music accurately with no added resonances.

Focal ISS 200 8" 2 way component Speakers

The big 8" woofer delivers plenty of impact.

Adjustable tweeter

Each separate Integration processed aluminum inverted dome tweeter features a built-in phase plug and wave guide, which act together to increase the power of high-frequency notes and improve the stereo soundstage. Focal includes a low-profile surface mount and an angled mount so you can set up the tweeter for the best possible imaging in your vehicle.

Built-in crossover networks

The crossover networks are built-in, so you don't have those extra boxes to install. Integration speakers allow you to put Focal sound quality and construction into your vehicle, so you can enjoy a dramatic jump in performance over your old speakers.

Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.

Product Highlights:

  • component speaker system includes two 8" woofers and 2 tweeters
  • Polyglass woofer with butyl rubber surround
  • processed aluminum inverted dome tweeter
  • built-in crossovers
  • woofer grilles not included
  • 4-ohm impedance
  • 5-80 watts RMS power range (160 watts peak)
  • frequency response: 40-20,000 Hz
  • sensitivity: 91.4 dB
  • woofer top-mount depth: 2-1/2"
  • warranty: 1 year
  • Our 60-day money-back guarantee

What's in the Box:

  • Two 8" Woofers
  • Two inverted dome tweeters (with 5" length of speaker wire attached)
  • 2 Surface mount tweeter housings (installed)
  • 2 Angled surface mount tweeter housings
  • Two 19" Lengths of speaker wire with in-line tweeter crossovers
  • Two 7" Lengths of speaker wire with in-line woofer crossovers
  • 2 Foam woofer gaskets
  • 8 Speed clips
  • Four 7/8" Flathead screws
  • Eight 1" Self-tapping screws
  • Owner's manual (English/ French)
  • Focal window sticker
Reviews

Focal Integration ISS 200 Reviews

Average Customer Review(s):

(1 Review)

Great sound but developed a buzz

Jeff D. from Ocala, Florida on 4/18/2015

Great sound from speakers. But after 2 years one 8" driver started buzzing at 630-680Hz. Very annoying, no visible rattle source. Twisting the unmounted speaker frame during playing a test tone at that frequency temporarily stops the buzz, but it's not a solution. Something got separated or loose in the construction.

Pros: Five stars for sound.

Cons: Minus three stars for buzz. Result: two stars, one for each year of non-buzzing service.

Details

Hands-on research

Features and Specs

General
Speaker Size 7 7/8
Design 2-way
Tweeter Design Inverted Dome
Impedance (Ohms) 4
Tweeter Composition Aluminum
Woofer Composition Polyglass
Woofer Surround Butyl Rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) 87.2
Sensitivity at 2.83 volts 91.4
Frequency Response 40 - 20k Hz
Minimum RMS Wattage 5
Maximum RMS Wattage 80
Peak Power Handling (Watts) 160
Top-mount Depth (Inches) 2 1/2
Bottom-mount Depth (Inches) 2 3/4
Cutout Diameter or Length (inches) 7

Product Research

Woofer
Tweeter

Woofer

Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.

Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.

Voice Coil: The voice coil is wound around a 1" diameter low-mass Kapton former, ensuring no coil deformation.

Crossovers: The included 7" woofer wires have integrated crossovers. The woofer ends of the wires have female quick-slides that easily connect to the woofer terminals.

Tweeter

Inverted Dome Tweeter: The tweeter is an inverted aluminum dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.

Mounting Options: The tweeters can be surface mounted and include two types of surface mount housings, one low profile and one angled:

 Flush MountLow Profile Surface MountAngled Surface Mount
Mounting Height0.3"0.894"1.933"
Mounting Depth0.55"0.875" (screw depth)0.875" (screw depth)
Frame Diameter1.871"1.88"N/A
Cutout Diameter1.67"N/AN/A
WidthN/AN/A1.895"
Surface DepthN/AN/A2.839"

Crossovers: The included 19" tweeter wires have integrated crossovers. The tweeter ends of the wires have quick-slide terminals that easily connect to the wires soldered to the tweeters. The input end of each wire has three leads, a negative and two positives. The positive leads are labeled Car and Display, with a lower output level from the Car lead (useful because the placement of the woofer in a typical car installation requires the tweeter output be lowered to maintain a balanced sound).

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Highly rated for sound and fit.[ Alan  Mar 16, 2016 ]

2 questions already asked

Thanks for your question. Many manufacturers no longer include grilles due to the fact they usually end up behind existing panels/grilles. There are grilles available. This came from the "Accessories" tab. You can check out the link below. Hope this helps. https://www.crutchfield.com/p_125G08/Speaker-Grilles-8-waffle-style.html [ Kenny  Apr 29, 2017 ]  Staff
These speakers are currently only sold in pairs.[ Jeff  Nov 28, 2016 ]  Staff
Articles