W Cone: The woofer cone is a sandwich composite consisting
of a foam core laminated with glass fabric on both sides. The result of this
full polymerization is a composite far more rigid than other cone material
combinations of equal mass, while still maintaining the excellent damping
characteristics of the foam core.
Surround: The rubber surround is resistant to ultraviolet
rays, temperature extremes, and humidity to add to the speaker's reliability and
Zamak Basket: The woofer features a non-magnetic cast Zamak
basket. Zamak is a rigid alloy of Zinc, Aluminum, Magnesium, and Copper. The
legs of the frame are filled with high viscosity rubber which absorbs any
vibration in the chassis.
Voice Coil: The two layer voice coil is wound around a
40mm (1.57") diameter low-mass Black Kapton former, ensuring no coil deformation.
Neodymium Magnets: The woofers use Neodymium ring magnets,
which have magnetic flux power similar to a ceramic magnet 10 times their size,
reducing the size and weight of the speaker.
Cone: Like the woofers, the midrange drivers use W sandwich
cones with rubber surrounds, Zamak baskets, and Neodymium magnets.
Voice Coil: The voice coil is wound around a 1" diameter
low-mass Kapton former, ensuring no coil deformation.
Size: The midrange drivers are not a standard size, approximately 3"
diameter. It can be top or bottom mounted and has these dimensions:
- Depth (top mount): 1.41"
- Mounting height: 0.2"
- Flange height: 0.2"
- Depth (bottom mount): 1.61"
- Tweeter protrusion: 0" (zero)
- Cutout diameter: 2.87"
- Frame diameter: 3.46"
Beryllium Tweeter: The tweeter is an inverted Beryllium
dome, producing a broad sound stage. Beryllium is approximately seven times
stiffer than titanium with inner damping characteristics similar to silk.
Combined with its extreme light weight, these properties make Beryllium an
excellent tweeter material. The tweeter has a Neodymium magnet to
provide a powerful magnetic field for the voice coil, while still maintaining
the tweeter's compact dimensions.
Mounting Options: Focal recommends flush mounting and the
flush mount cup is built onto the tweeter housing. The included housing also
allows surface mounting.
Flush Mount Dimensions:
||2.12" x 2.87"
Design: Focal's Crossblock crossover has multiple settings, 4,480 total combinations, allowing you to optimize the
system and compensate for the driver locations and the acoustic environment of
the specific car.
- Width: 13"
- Height: 2.25"
- Depth: 10.375"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.