Cone: The woofer cone is a sandwich design, with a 0.4mm
flax center between two 0.04mm glass layers. This combination of materials results
in a neutral sound without coloration.
Surround: The butyl rubber surround is resistant to ultraviolet
rays, temperature extremes, and humidity to add to the speaker's reliability and
Aluminum Basket: The cast aluminum basket is rigid and
Voice Coil: The voice coil is wound around a 1"
diameter low-mass Kapton former, ensuring no coil deformation.
Inverted Dome Tweeter: The tweeter is an inverted
Aluminum/Magnesium dome, producing a broad sound stage. The tweeter uses
a durable poron suspension.
Mounting Options: The tweeter can be surface or flush mounted
using the included adapters. Focal recommends flush mounting, but the included
angled cup allows surface mounting at approximately 30°.
Tweeter Level: You can adjust the output level of the tweeter
on the crossover to -3 dB or 0 dB (flat).
Wiring: The input and output wires are attached to the
crossover. The 12" input wires are not terminated (bare wire). Both the
woofer and tweeter output wires are also 12" long; the woofer output is
terminated with quick slides to easily attach to the woofer and the tweeter
output is not terminated (bare wire).
Crossover Slopes: The crossover uses 2nd order, 12 dB per
octave low-pass and high-pass filters. The crossover point for both is 4 kHz.
| ||Flush Mount ||Angled Surface Mount |
|Mounting Height ||0.286" ||1.813" |
|Depth ||0.937" ||0.154" (minimum screw depth) |
Diameter ||2.048" ||1.794" x 2.713" |
Diameter ||1.815" ||N/A |
Crossover: The crossover dimensions are:
- Width: 2-3/8"
- Height: 1-1/8"
- Depth: 3-3/8" (5-1/4"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.