Touchscreen Display
Onboard Navigation
Built-in Bluetooth
AM/FM + SiriusXM Ready
DVD/CD Playback
USB Port/SD-Card Slot
iPod/Android/Blackberry Connectivity
Audio Section
AV Connections
Remote Control

Touchscreen Display

Motorized Touchscreen Display: The JVC KW-NT700 features a motorized 7" TFT Active Matrix, 16:9 touchscreen monitor. The screen has a resolution of 800 (H) x 480 (V) x RGB with 1,152,000 total pixels. The touchscreen LCD serves as a video monitor, system information display and touchscreen control panel. The monitor electronically slides down for loading or ejecting a disc.

Reverse Tilt Monitor: The Reverse Tilt Monitor not only allows the bottom of the monitor to be tilted upward at five different positions, but also enables the top of the monitor to be tilted outward to eliminate reflected glare.

Ultras-Fast Start-Up Time: The JVC KW-NT700 has an ultra-fast start up time of approximately 9.4 seconds from Off to the Map screen or an audio/video source screen.

Hard-Key Controls w/ Variable Button Illumination: In addition to the head unit's touchscreen monitor, the KW-NT700 features hard-key controls along the bottom edge of the screen. The hard-key controls provide Power, Source, Eject, Volume, Menu, Map, and AV functions. The JVC KW-NT700 allows you to adjust the unit's hard-key button illumination. It offers 7 color presets (Blue, Aqua, Green, Yellow, Pink, Red, and Purple) for the hard-key button illumination. Additionally, there is a user preset, allowing you to individually adjust the intensity of Red, Green, and Blue from 0 to 31. There is also a "Scan" setting which scans through all of the 7 available preset colors continuously.

Split Screen View: The KW-NT700's screen views can be easily toggled from one to another simply be touching the screen or appropriate button. The Split Screen View mode divides the screen into two screens, with navigation on the left and a control window on the right.  With this Picture-in-Picture type function the head unit can now display the navigation and source screens (or rear-view camera) simultaneously.

Quick Menu: The Quick Menu is user-changeable and can be assigned a set of frequently used features for quicker, easier access. Up to 6 Quick Menu short-cuts can be assigned. The Quick Menu can be accessed from the head unit's navigation Map screen.

Display Adjustment: You can adjust the contrast, color, tint, and detail level during video playback.

Selectable Aspect Modes: You can choose from four aspect modes for the in-dash display:

• Regular: For 4:3 source material, 4:3 and 16:9 pictures display with black bars on either side (16:9 images are compressed).
• Full: Expands 4:3 pictures horizontally to fill the entire width of the screen, distorting the picture slightly but retaining full image height.
• Auto: The correct aspect mode is automatically chosen based on the incoming signal.

Adjustable Dimmer: When 12 volts is applied to the illumination lead (orange/white) and the dimmer is set to Auto, the display will dim automatically when you turn on your vehicle's exterior or interior lights. The dimmer can also be set to Off (normal brightness at all times), or On (display is always dimmed). You can also manually adjust the display brightness for Day & Nighttime driving.

Parking Brake Detection: To prevent the displaying of video while the vehicle is in motion, the light-green parking brake wire (within 22-pin harness) must be connected to your vehicle's parking brake detection circuit. While the vehicle is in motion (parking brake off), you can still view many of the other display and menu functions.

Security Lock: You may program the unit with a 4 digit security code. Once the unit has been programmed with a security code, the code must be entered to use the unit after it has been turned off.

2-DIN Chassis: The JVC KW-NT700 has a 2-DIN chassis (also known as Double DIN), and will fit in many vehicles with a large dash opening. The unit can be ISO-mounted using factory brackets, or Euro-mounted using the supplied mounting sleeve. As always, please consult Crutchfield's Outfit My Car to verify fit with your vehicle.

Onboard Navigation

Built-In Navigation (powered by NAVTEQ): The JVC KW-NT700 features a built-in GPS Navigation system with maps of the United States (including Hawaii and Alaska), Canada, and Puerto Rico; powered by NAVTEQ Maps. All map data is stored on the unit's 8GB SSD (sold state drive). The unit's 3-sensor navigation system helps to pinpoint your vehicle's current location. Once a destination is set, the unit provides turn-by-turn voice & visual guidance through your vehicle's speakers and the unit's display monitor; using NAVTEQ navigation software.

Map Updates:Map updates via an SD/SDHC memory card can be purchased at the online NAVTEQ store.

3-Sensor Navigation: The JVC KW-NT700 is equipped with  a high-sensitivity WAAS capable GPS receiver (SiRFstarIII), Speed Pulse wire, and Gyro sensor to calculate your vehicle's current location.

GPS Antenna: The KW-NT700 comes supplied with a GPS antenna that features a magnetic base and an attached 16.5' cable terminated by a proprietary plug which connects to GPS-ANT input on the back of the head unit. The unit also comes supplied with a two-side self-adhesive pad if you are having trouble finding a flat metal surface to mount the antenna. The GPS antenna can be mounted inside the vehicle (on the dash) or outside the vehicle (on the roof or trunk). The GPS antenna measures 1.3125" (w) x 0.5625" (h) x 1.4375" (d).

On-Screen Map: As you travel, the KW-NT700 guides you to your destination with voice prompts, arrows on the map, and on-screen directions. At the bottom of the screen is your current street, while the top of the screen shows your next street; the upper-left corner indicates the distance to your next maneuver. Your route is marked with a light-blue line, while your vehicle is marked by a red arrow (or car) on the screen, and checkered flag marks your destination. A magnified view of the map is displayed when approaching your next turn. When you reach an area approximately within 90' around the destination/via point, the navigation system considers you to have reached your destination/via point. If you depart from the original route, the navigation system recalculates the route and provides new directions. You can adjust the following map settings.

• 2D/3D Maps: You can changes the perspective of the map from 2D North-Up (displays the map in 2 dimensions with North at the top), 2D Heading-Up (displays the map in 2 dimensions with  your direction of travel at the top of the screen), 3D Map (displays the map in 3 dimensions with your direction of travel at the top of screen).
• Map Views: You can zoom in and out of the map screen, as well as scroll the map screen left/right or up/down. You can also rotate a 3D map screen 360-degrees.
• Night Map Mode: Night Map Mode dims the map display when driving at night. You can turn this feature On/Off or set to Auto so the map display dims when you turn on your vehicle's headlights (the unit's illumination control lead connect is required for Auto mode).

3D Landmarks: The KW-NT700's navigation map features three-dimensional buildings to provide you with a better perspective of your surroundings. With 3D Landmarks, you can see representations of prominent buildings in many cities.

Voice Guidance (with Text-to Speech): When you approach a turn, the KW-NT700 guides you with voice guidance (Text-to-Speech) through your vehicle's front speakers and visual indications on the KW-NT700's screen. The unit offers 3 voice guidance languages including English, Spanish and French; with adjustable volume (0-20).

Lane Assist w/ Junction View: The Lane Assist function guides you to the appropriate lane you should be in for upcoming junctions and interchanges, while  Junction View displays a realistic view of upcoming road details facilitating a safer navigation experience.

Destination Search: The JVC KW-NT700 offers the following Destination Search functions:

Routing Preferences: You can select how the unit will calculate your route by adjusting the following settings:

• Route Priority: You can select the unit to either calculate the fastest timed route or shortest distant route.
• Route Avoidance: You can select to use or avoid the following types of roads; Freeway, Toll Road, or Ferry.

Via Points: After selecting your destination, you can select up to four places (via points) to stop by along your route.

Adjusting Vehicle Position: If you find your current position is displayed incorrectly on the map, you can adjust your vehicle's position/location.

Speed Alert: The system sounds an alarm when you surpass the speed limit of the current road by a set value. You can choose for the unit to alert you when you are 3, 6, 10, 15, or 20 miles over the speed limit.

Simulate: You can simulate a desired route to confirm what your trip will look like.

Built-in Bluetooth

Bluetooth Technology: The JVC KW-NT700 features built-in 2.4GHz Bluetooth technology (version 2.1+EDR). The KW-NT700's built-in Bluetooth technology promotes safe driving habits by allowing you to have a hands-free conversation while driving, without the need to hold a phone to your ear. Your Bluetooth enabled phone can be kept in your purse, pocket, or glovebox; while you communicate through the JVC navigation receiver. The head unit also support Bluetooth audio streaming from your Bluetooth enabled smartphone or digital audio player.

Bluetooth Profiles: In order to use Bluetooth wireless technology, your phone must also be Bluetooth compatible and be able to interpret certain profiles. This unit is compatible with the following Bluetooth Profiles:

• Hands-Free Communication: HFP (Hands Free Profile), OPP (Object Push Profile), PBAB (Phone Book Access Profile).
• Audio Streaming: A2DP (Advanced Audio Distribution Profile), AVRCP (Audio/Video Remote Control Profile).

Pairing: Your Bluetooth enabled mobile phone or digital audio player must be paired with KW-NT700 before hands-free & wireless operation. You can register up to five Bluetooth enabled devices with the JVC head unit. You can keep two phones connected at all times (only one can be used during a call). Due to the differences in Bluetooth technology, some Bluetooth enabled devices may be incompatible, function improperly, or may not support all features when used with the JVC head unit. See JVC's Bluetooth compatibility chart for a complete list of compatible Bluetooth enabled devices.

External Microphone: The JVC KW-NT700 includes an external microphone to carry on your side of your phone conversation and voice command dialing. The external wired microphone offers improved audio quality versus an integrated microphone, so you can be heard easier over noisy traffic and road noise. You can adjust the level of the microphone without affecting the other sources. The external microphone features an attached 12' cable terminated by a right-angle 3.5mm connector which plugs into the mic input on the rear-panel of the head unit. The microphone offers an integrated mounting bracket which can be clipped to your vehicle's sun-visor or taped to your dash. The external microphone measures 0.525" (diameter) x 1.485" (depth). This unit does not offer an integrated front-panel microphone.

Bluetooth Hands-Free Communication: The head unit supports Bluetooth hands-free communication for your Bluetooth enabled mobile phone. The touchscreen controls of the KW-NT700 can be used to dial a number, answer an in-coming call, or end a call. The unit also features an external microphone (featuring adjustable gain), so you can carry on your side of the conversation while listening to the caller through your vehicles speakers (front or all). During a conversation, you can switch between the Private Mode (talking directly on your cell phone) and the Hands Free Mode. 

• Answering a Call: When a call comes in, a ring-tone will be heard through your vehicle's speaker and the caller's name or phone number will be displayed on the head unit's touchscreen monitor. You can answer the call from the head unit's touchscreen, or setup the head unit to automatically answer the incoming call within 5 seconds.
• Dialing a Number: Using the KW-NT700, you can dial a phone number in one of the following ways:
  • Entering a Phone Number: Allows you to directly dial a phone number up to 32 digits from the head unit's touchscreen.
  • Speed (Preset) Dialing: Allows you to register up to 6 phone numbers for quick dialing. The preset numbers can be accessed from the head unit's touchscreen.
  • Phone Book: You can download phone book data from your cell phone to the KW-NT700, so you can then dial by using the downloaded phone book numbers. Up to 5,000 numbers can be stored for each registered cell phone. Each number can be up to 32 digits long and each name can be up to 50 characters long. You can do an alphabetical search (A-Z) to find your desired contact.
  • Call Log: The Call Log is a list of calls that have originated from and were received by this unit that you can dial. You can select Outgoing, Incoming, or Missed calls (up to 50 each).

  Note: While your vehicle is moving over 3mph, some Bluetooth hands-free communication functions are disable for safety reasons. The keys associated with the disabled functions become ineffective if touched.

Wireless Audio Streaming: The JVC KW-NT700 also supports wireless audio playback (AD2P) and control (AVRCP) of a Bluetooth enabled audio player or smartphone. The KW-NT700 will be able to control basic playback functions of your Bluetooth device's stored music; such as Play/Pause, Skip Next/Previous, and Fast Forward/Rewind. The head unit will also display your stored music's song information; such as Song and Album title. The KW-NT700 also supports audio streaming of select music apps from your Bluetooth enabled smartphone, but without control or metadata. You will continue to use your Bluetooth enabled smartphone to view and control streaming music apps. When an incoming call or outgoing call is in progress from your Bluetooth enabled mobile phone, audio streaming will be paused so you can take your call. Once the call is finished, your streaming music will resume.

AM/FM + SiriusXM Ready

AM/FM Tuner: The JVC KW-NT700 features a built-in AM/FM tuner with manual, seek, and preset tuning.

RDS: The Radio Data System (RDS) feature displays radio broadcast information such as artist, title, and album when listening to compatible AM/FM stations,

Preset Tuning: You can store a total of 18 FM stations presets and 6 AM station presets. The radio allows you to set your AM/FM stations manually or automatically.

IF Filter: You can also switch the tuner's IF filter to Wide or Auto to increase/decrease the sensitivity.

SiriusXM Ready: The JVC KW-NT700 comes ready for SiriusXM programming with access to XM & Sirius Satellite Radio stations. Thanks to its proprietary SiriusXM Connect port, you can add the optional SXV200V1 SiriusXM Connect tuner and receive more than 150 channels of exclusive programming directly from SiriusXM, via the "SiriusXM All Access" package (subscription required). Visit SiriusXM.com for a complete list of subscription options & channel guide. Additional features of the SXV200 SiriusXM Connect tuner include:

• Channel list displays a list of all available channels
• Category Search searches for channels in a certain category
• Displayed Information such as Channel Name, Artist Name, & Song Title can be viewed on the head unit's LCD
• Up to 18 SiriusXM Satellite Radio station presets
• Channels containing unsuitable content for children can be blocked

DVD/CD Playback

Compatible Discs: The JVC KW-NT700 supports playback of DVD-Video, DVD-R/RW, DVD+R/RW, CD-Audio, CD-Text, CD-R/RW discs. The touchscreen monitor electronically slides down for loading and ejecting discs.

Compressed Music Playback: The KW-NT700 can play AAC (32-320 kbps), MP3 (bitrate: 32-320 kbps), WMA (bitrate: 32-320 kbps), WAV (bitrate: 16 bit) audio files recorded onto DVD-R/RW, DVD+R/RW, and CD-R/RW discs. AAC, MP3, WMA, and WAV files must be formatted in ISO 9660 level or level 2, Romeo, or Joliet. The head unit can recognize a total of 5,000 files and 250 folders (a maximum of 999 files per folder). This unit will recognize a total of 25 characters for file/folder names. The KW-NT700 can display ID3 Tags (ver. 1.0/1.1/2.2/2.3/2.4) for MP3 files, as well as WAV/WMA Tag information.

Playback & Search Functions: The KW-NT700 offers the following playback & search functions for DVD/CD playback;  Folder/File Search, Play/Pause, Fast Forward/Reverse, Next/Previous Track, Random (all/disc), and Repeat (track/chapter/folder).

DVD Touchscreen Control: During DVD playback, you can control certain operations simply by touching an area of the screen. The touchscreen has 3 functions areas. You can touch the left of the screen to start the current chapter over, or the right of the screen to skip to the next chapter. Pressing the middle of the screen activates the DVD playback on-screen buttons.

Disc Resume: If you change the source, playback also stops (without ejecting the disc). Next time you select CD for the playback source, the disc will start from where it has been stopped previously.

Mounting: For proper disc playback you must install the unit within 30-degrees of horizontal.

USB Port/SD-Card Slot

USB Port: The JVC KW-NT700 features a rear-panel USB (type-A) port on a 38" pigtail to connect your USB device. For the unit to recognize your USB device, it must be specified as a mass storage class device. Up to 4 USB devices can be connected to the head unit's USB port via a USB hub (sold separately). USB portable audio players that can be charged via USB will be charged when plugged into the navigation receiver's USB port (5V/1A), and the vehicle's ignition switch is set to ACC or On.

SD-Card Slot: The JVC KW-NT700 is equipped with a front-panel SD-card slot hidden behind the unit's motorized slid-down touchscreen monitor. The unit supports SD (up to 2GB) and SDHC (up to 32GB) memory cards.

Compatible Media Files: The head unit supports audio and video playback from USB mass storage class devices and SD/SDHC memory cards formatted in FAT 12/16/32. The KW-NT700 can recognize a total of 9,999 folders with a maximum of 999 files per folder (per USB device or SD card).

• Music Files: The KW-NT700 supports AAC (bitrate: 32-320 kbps), MP3 (bitrate: 32-320 kbps), WMA (bitrate: 32-320 kbps), WAV (bitrate: 16 bit), FLAC (bitrate: 16 bit) audio files stored on a USB msc device or SD/SDHC memory card. The KW-NT700 can also display ID3 Tags (ver. 1.0/1.1/2.2/2.3/2.4) for MP3 files, as well as WAV/WMA Tag information and iTunes m4a metadata.
• Video Files: The KW-NT700 supports MPEG4 (picture size 720x480; 30fps), AVC H2.64, (picture size: 720x480; 30fps), and WMV (picture size: 720x480: 30fps) video files stored on a USB msc device or SD/SDHC memory card.

Playback Controls: You can control basic playback functions; such as Folder/File Search, Play/Pause, Fast Forward/Reverse, Next/Previous Track, Random (folder), and Repeat (track/folder).

iPod/Android/BlackBerry Connectivity

iPod/iPhone Connectivity: The JVC KW-NT700 supports audio/video playback from select Apple iPods & iPhones. The JVC KW-NT700's rear-panel USB (type-A) port and rear-panel 3.5mm iPod Video input allow you to connect your Apple iPod/iPhone using the JVC KS-U49 iPod cable (105KSU49, sold separately). Video can only be displayed while the vehicle is in park. If you only want to playback audio from your iPod or iPhone, you can simply connect it to the KW-NT700's rear-panel USB port using either the USB/iPod dock cable that came with your iPod/iPhone or PIE's iPod Direct Connect Cable (469USBIPH, sold separately).

iPod/iPhone DAC Bypass: Because the JVC KW-NT700 uses its USB connection for audio & control transfer, your iPod/iPhone's stored music is loaded instantly to the head unit and sound quality is maximized through the head unit's 24-bit D/A converter, allowing for a Signal-to-Noise ratio up to 100dB.

iPod/iPhone Control: You can choose to control your iPod/iPhone from the JVC head unit or from your iPod/iPhone's touchscreen or clickwheel. The KW-NT700 offers 3 control modes - Head Unit, iPod, and External.

• Head Unit: From the head unit's front-panel controls you can search for music by Playlist, Artist, Album, Song, Podcast, Genre, Composer, and Audiobook. You can search video by Playlist, Movies, Music Videos, TV Shows, Video Podcasts, Rentals, and iTunesU. Once a Playlist or Category is selected, the content is listed in alphabetical order. The KW-NT700 also supports Repeat (file/all) and Random (album/all) playback functions of your iPod/iPhone.
• iPod: You can choose to navigate your iPod or iPhone's stored music and videos from its clickwheel or touchscreen, like you are accustomed to during normal usage.
• External (App Mode): External Mode lets you enjoy audio/video content from downloaded Apps (such as Netflix, or YouTube, etc..) streamed to your Apple iPhone, on the KW-NT700 (using the JVC KSU-49 cable; sold separately). Video can only be output from the iPhone 4/4S. This mode offers no control of your iPhone. You will continue to use your iPhone's touchscreen to navigate your Apps. The External Mode's video function can only be accessed when the vehicle is in park and the hand-brake is fully engaged. Audio content from select music apps (such as Last.fm or Rhapsody) can also be enjoyed from any iPhone.

Pandora App: The Pandora App (free) lets you play music from the Pandora music service through the JVC KW-NT700 using your connected Apple iPhone, via the USB/iPod connector cable (included with your iPhone) or the JVC KSU-49 cable (sold separately). The JVC KW-NT700 provides control over the Pandora music service and displays Artist, Album, and Song information. You can select Pandora stations from your station list; you can sort the station list by date or A-Z. You can also skip song tracks within a station. In addition, you can also give songs a thumbs up/down and bookmark songs/artists. To access Pandora you must have an Apple iPhone (iOS3 or later) with the latest version of the Pandora application from Apple's iTunes App Store. Your iPhone will need an active Data Plan account with connection to the Internet via 3G, EDGE, or WiFi. You will also need a Pandora music service account.

iHeartRadio Link for JVC: The iHeartRadio Link for JVC (free app) is an Apple iPhone application that delivers access to over 750 Clear Channel local radio stations in both AM and FM, as well as commercial-free and artist-programmed channels. The free iHeartRadio Link app lets you play music from the iHeartRadio music service through the JVC KW-NT700 using your connected Apple iPhone, via the USB/iPod connector cable (included with your iPhone) or the JVC KSU-49 cable (sold separately). All stations are streamed in high-quality AAC format. The JVC KW-NT700 will display song & artist information, as well as Album Art. You can select available stations from the unit's on-screen station list, which includes - Favorites (up to 100), Featured, Local Stations, All Cities, National Stations, Genres, and Personalities. You an also have the head unit randomly select stations for you. iHeartRadio even provides "tag" information for each song, so you can transfer "tag" information to your connected iPhone and purchase your "tagged" songs later from the online iTunes store.

NaviBridge for iPhone: NaviBridge is a free iTunes application that allows you to remotely control the JVC navigation head unit by setting a destination from your USB connected iPhone. You can set a destination from your iPhone's Google Map screen, or select one from your iPhone's stored Contacts or Bookmarks (up to 100). NaviBridge is compatible with the iPhone 3G/3GS/4/4S (running iOS ver. 4.3 or later).

iPod/iPhone Display: The KW-NT700 will display your iPod/iPhone's music file information of your stored music, regardless of control mode. The head unit will display Track number, Elapsed playing time, Artist name, Song/Album title, and Album Art. Pandora and iHeartRadio song/artist information will also be displayed. Other downloaded music apps will not display on the unit's LCD monitor.

iPod Charging: The head unit's USB connection provides 1A of current to power and charge your connected iPod/iPhone when your vehicle's ignition switch is set to the 'ACC' or 'On' position. This unit does not charge the iPad. If your iPod/iPhone has no initial battery charge, then the unit will not recognize it.

iPod/iPhone Compatibility Chart: The JVC KW-NT700 is "Made for iPod/iPhone" compatible and supports the following iPod/iPhone model features when using the JVC KSU-49 cable (as of 10/16/2012):

Drive Change Mode (for Android/BlackBerry): The JVC KW-NT700's USB port supports playback from Android & BlackBerry smartphones (via USB mass storage mode). JVC's Drive Change Mode lets you connect your Android or BlackBerry smartphone (that uses an external memory card) directly to the head unit, via USB. Drive Change Mode will let you switch between your Android or BlackBerry smartphone's internal and external memory (such as microSD Card), so you can listen to music stored on either memory. You'll continue to be able control basic playback functions; such as folder/file search, play/pause, and skip next/previous; regardless of memory type.

Audio Section

24 Bit D/A Converter: The JVC KW-NT700 utilizes a 24-bit digital to analog converter for superior sound quality.

MOSFET Amplifier: The KW-NT700 is equipped with a MOSFET amplifier. Compared to conventional power supplies, the MOSFET amplification circuit is smaller and more efficient, and it delivers increased power with less distortion and absolutely zero on/off switching noise. More power means louder and cleaner music at higher volumes because you're not pushing the limits of the amplification circuit.

CEA2006 Compliant: The power specifications for the KW-NT700 are compliant with the CEA2006 Mobile Amplifier Power Testing and Measurement standards from the Consumer Electronics Association (CEA). These standards were developed as a way to equitably compare power specs from model to model and between manufacturers. The power output specs for the KW-NT700 are as follows:

• CEA2006 Specs: 20 watts RMS x 4 channels (at 4 ohms, 20Hz-20kHz, 1% THD-N)
• Maximum Power Output: 50 watts x 4 channels (200 total watts)

Amplifier Gain Control: When you are using the KW-NT700 with factory speakers (or those rated to less than 50 watts peak), the Amplifier Gain Control can limit the amount of power being sent to those speakers. When the Amp Gain Control is set to low, the volume control ranges from 0 (minimum) to 30 (maximum). When using speakers rated higher than 50 watts peak, you can set the Amp Gain Control to high, and the volume control will range from 0 to 50. The internal amp can also be turned off when all the speakers are powered by outboard amplifiers.

Volume Adjust: The input level of each source (other than FM) is adjustable relative to the FM radio volume, so there isn't a significant volume difference when changing sources. Each source is individually adjustable from -5 to +5.

2.5V/6CH Preamp Output: The KW-NT700 is equipped with three pair of 2.5V preamp outputs (Front/Rear/Subwoofer). The front & rear preamp outputs offer balance/fade control and are designed to hookup to a full-range 4-channel amplifier. The subwoofer preamp output is non-fading and designed to hookup to a mono-block subwoofer amplifier. You can adjust the head unit's subwoofer level between -50 and +10.

Digital Crossover Network: The KW-NT700 features a variable high pass crossover for the front & rear speakers, as well as a low pass crossover for the subwoofer. 

• Front: Frequency (Through, 30/40/50/60/70/80/90/100/120/150/180/220/250Hz), Slope (-6/-12/-18/-24dB), Gain (-8 to 0dB), Tweeter Level (-8 to 0dB)
• Rear: Frequency (Through, 30/40/50/60/70/80/90/100/120/150/180/220/250Hz), Slope (-6/-12/-18/-24dB), Gain (-8 to 0dB)
• Subwoofer: Frequency (Through, 30/40/50/60/70/80/90/100/120/150/180/220/250Hz), Slope (-6/-12/-18/-24dB), Gain (-8 to 0dB), Phase (Normal/Reverse)

Equalizer: The JVC KW-NT700 provides both a Preset EQ for quick musical adjustment and 13-Band EQ for more advanced customization.

• Preset EQ: Choose from Flat, Dynamic, Bass Boost, Natural, Vocal Boost, Vibrant, or User 1/2/3/4.
• 13-Band EQ: Each user mode lets you adjust the head unit's 13-band equalizer; 62.5Hz, 100Hz, 250Hz, 400Hz, 630Hz, 1kHz, 1.6kHz, 2.5kHz, 4kHz, 6.3kHz, 10kHz, and 16kHz (+/- 9dB).

Source Link EQ: This feature allows you to store EQ settings for each source (Disc, AM/FM, AV-IN, USB, iPod, Bluetooth, iHeart Radio,  and Pandora).

DSP Control: The JVC KW-NT700's Digital Sound Processor (DSP) offers various vehicle, audio, and driver settings to improve the sound in your car, truck, SUV, or van.

• Vehicle Criteria: You are able select the type of vehicle, your seated position, and speaker distance to better quality your vehicle's sound.
  • Vehicle Type: can choose what type of vehicle you have; Compact, Full-size Car, Wagon, Minivan, SUV, or Van (full-size)
  • Seated Position: for a better sound-stage you can select your optimal listening position; choose from All, Front Left,  Front Right or Front
  • Time Alignment: manually fine tune the sound stage by selecting the distance for each individual speaker in the vehicle compared to your listening position; select between 1.6-16.4' for the Left Front Speaker, Right Front Speaker, Left Rear Speaker, Right Rear Speaker, and Subwoofer
• Speaker Settings: You can set the size and location of your vehicle's speakers.
  • Front: Size (OEM, 3.5", 4", 5", 5.25", 6.5", 6.75", 7", 4x6", 5x7", 6x8", 6x9", 7x10"); Location (Door, On Dash, Under Dash), Tweeter (None, Small, Medium, Large)
  • Rear: Size (None, OEM, 3.5", 4", 5", 5.25", 6.5", 6.75", 7", 4x6", 5x7", 6x8", 6x9", 7x10"); Location (Rear Deck, Door)
  • Subwoofer: Size (None, 6.5", 8", 10", 12", 15")
• Sound Enhancements: The head unit provides further audio enhancement for better sound in your vehicle.
  • Space Enhancer: set the Space Enhancer to Small, Large, or Off. Each setting value indicates the soundscape level
  • Sound Stage Elevation: creates an affect of hearing the sound from a higher place than the actual position of your vehicle's speakers
  • Loud (Loudness): boosts low and high frequencies to produce a well-balanced sound at a low volume level
  • Bass Boost: four-step Bass Boost (Off/1/2/3) to enhance your music's lower frequencies
• Compressed Music Enhancers: The head unit offers several audio adjustments dedicated to enhance the sound quality of your compressed digital music.
  • Audio Contrast: sharpens vague sound to make the audio more realistic; effective for compressed music data
  • D.T. Expander (Digital Track Expander): reproduces the natural sound of digital audio sources by restoring data that was lost and waves that were changed during audio compression to their original states; effective for compressed music data
• Driver Sound Improvements: The KW-NT700 features various audio settings to help improve your driving and audio experience.
  • Start Up Sound Level: starts the head unit with a volume lower than when the system was turned off; you can then manually turn it up back to the previous level
  • Road Noise Compensation: increases the volume of little sound that can be easily washed out by road noise and boosts the bass
  • Adaptive Volume: automatically increases the volume level (both for Navigation and audio/video) as the car speeds up; you must connect the unit's Speed Signal wire (pink/gray) to your vehicle's speed sensor wire
  • Reverse Audio Reduction: attenuates the receiver's AV sound when you shift your vehicle into reverse, so you can concentrate more on backing up your vehicle safely

Dynamic Range Compression: The dynamic range can be adjusted by selecting either Normal, Wide or Dialog. Dialog makes the total sound volume become larger as compared with Wide and Normal, allowing you to listen to the movie's dialogue more clearly. This is effective only on Dolby Digital software.

Key-Touch Tone: The in-dash head unit provides an audible beep to confirm button operation. This function can be turned On or Off.

AV Connections

Audio/Video Input: The rear-panel audio/video input consists of left and right RCA audio jacks and an RCA composite video jack, allowing you to connect external equipment to this head unit. The audio/video input can be set to one of the following modes.

• AV: Choose when connecting an audio/video component.
• Audio: Choose when connecting an audio component.
• Off: Select when no component is connected.

Camera In: The rear-panel Camera input consists of a composite video connector which allows you to connect an optional rear-view camera (105KVCM10, sold separately). The unit features a reverse gear signal wire (purple/white wire within 22-pin harness), that when connected to your vehicle's reverse light circuit, will automatically switch the KW-NT700's display to the rear-view camera input. Automatic video switching takes approximately 1.2 seconds.

Video Output: The rear-panel Video Output consists of a  composite video jack that allows you to connect an optional external monitor. You can watch the same video source that is being played on the DVD receiver on your connected external monitor. You can choose one of the following monitor types for the output to the external monitor(s):

• 16:9: Select this when the aspect ratio of your monitor is 16:9.
• 4:3 Letter Box: Select this when the aspect ratio of your monitor is 4:3, when viewing a widescreen picture black bars appear on the top and bottom of the screen.
• 4:3 Pan Scan: Select this when the aspect ratio of your monitor is 4:3, when viewing a widescreen picture, the black bars do not appear; however, the left and right edges of the picture will not be shown on screen.

Remote Control

Steering Wheel Remote Compatibility: The head unit features an OEM steering wheel remote control input wire (blue/yellow) within the included wiring harness that lets you keep your vehicle's factory radio steering wheel remote controls when used with an optional steering wheel audio control adapter (sold separately). Please consult Crutchfield's Outfit My Car to see if your vehicle is compatible.