Crutchfield Customer Review (What's this?)
So far great. East installation, sounds great.
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Polk Audio's 265-LS may be part of their Vanishing series, but one listen and you'll know this in-wall speaker is no "wall flower." The 265-LS offers stellar sound in an inconspicuous design that hides in your wall. Whether you're using this speaker as the basis for a stealth home theater, or a pair for stereo listening, its performance rivals that of Polk's flagship LSi M series traditional loudspeakers. In fact, you can put together a system mixing this in-wall speaker with free-standing LSi M floor-standing or bookshelf models — whatever suits your room and your decorating sense best.
The 265-LS begins with dual 6-1/2" Dynamic Balance drivers, which deliver clear, accurate mids and dynamic lows. Polk's PowerPort® bass venting system reinforces the bottom end for clean, punchy bass. The 265-LS uses Polk's own advanced version of the classic "ring radiator" tweeter for smooth, detailed highs. A wall distance toggle switch lets you compensate for boominess due to installation near a side wall. You also get a tweeter attenuation switch to help you get balanced sound in rooms with lots of reflective surfaces. Finish off by painting the magnetic Sheer-Grille™ to match your wall color, and the 265-LS is ready for showtime.
An optional in-wall bracket is recommended for installing the 265-LS in-wall speaker in a home with new construction.
So far great. East installation, sounds great.
Spencer, Mapleton, Utah
Average Customer Review(s):
So far great. East installation, sounds great.
THis is an easy to install, almost "invisible" in the wall speaker. Obviously bass is not so good (need a subwoofer), but could do without one. Like it a lot. My only personal comparison is with a pair of Bowers and Wilkins CWM 800 wall/ceiling speakers. The Polk 265-LS is a better sounding speaker, but if the B&W speakers were still easily available (they have been discontinued, I am told) I would purchase the B&W speakers (but they are not quite as "invisible").
Pros: Easy install, good looking (because they are not obtrusive).
Cons: Pretty expensive, for me.
|Quantity in Package||Single|
|Cutout Size||7.25 x 19.1875|
|Woofer Composition||Aerated polypropylene|
|Power Range (Watts)||10-200|
|Connector Type||Spring post|
Vanishing Series In-Wall Speakers: The Polk Audio Vanishing Series in-wall loudspeakers feature a precision-engineered, minimally flanged design and Polk's exclusive Sheer-Grille, which protrudes only 7mm from its surroundings. Installing virtually flush in your wall, the Polk Audio Vanishing Series in-wall loudspeakers offer a one-cut, drop-in installation and rotating cam stabilizing system. The Vanishing LS series in-wall speakers are timbre-matched to Polk Audio's flagship LSi and LSiM series loudspeakers for seamless blending from speaker to speaker when you're building a speaker system.
Dual 6-1/2" Drivers: This Polk Audio Vanishing Series 265-LS in-wall 3-way loudspeaker employs a 6-1/2" Dynamic Balance aerated polypropylene cone midrange driver, and 6-1/2" Dynamic Balance aerated polypropylene woofer, both with rubber surrounds, for a smooth, consistent frequency response. The aerated polypropylene cones are 20% lighter than conventional polypropylene, and 35% lighter than aluminum, to give you clear midrange, punchy bass, and high efficiency. Polk Audio's patented Dynamic Balance technology eliminates unwanted resonances.
Ring Radiator Tweeter: The 265-LS employs a 1" Dynamic Balance ring radiator tweeter for detailed highs and superb imaging. This high-performance tweeter features a 15° swivel housing, for more direct high frequency control, excellent off-axis imaging and more placement flexibility.
Reflective Room Compensation Control: The Reflective Room Compensation Switch, conveniently located on the front panel, allows you to digitally compensate for harsh reflective surfaces, such as smooth walls, glass windows, and hardwood floors. The filter doesn't merely reduce high frequencies, it simply cuts the level only in the 4-5kHz range where room acoustics most often interfere with performance. The switch is labeled "Tweeter" with two positions: out (normal) and in (filter).
Wall Distance Toggle Switch: If you mount your in-wall loudspeakers closer than 2 feet from a side wall, the proximity of the surface can elevate the midbass response between 50 and 200Hz, causing a boomy sound. To compensate, the 265-LS is equipped with the Vanishing Wall Distance Toggle switch, located on the front panel. The filter adjusts the crossover to flatten the response, and tune out the boominess, without sacrificing the deep bass response of the speaker. The switch is labeled "Wall Dist." with two positions: in (<2' ) and out (>2').
PowerPort: The 265-LS features Polk's PowerPort bass venting, a patented port design that enhances the speaker's bass response while eliminating noise caused by the moving air turbulence. The provided foam rubber port plug should be used if you are installing the 265-LS in an area larger than a standard open stud bay.
Frequency Response: The overall frequency response of the in-wall loudspeaker is 28Hz to 33kHz, and the -3dB frequency response is 41 to 29kHz.
Sheer-Grille: The 265-LS features Polk Audio's exclusive wafer-thin Sheer-Grille, a magnetically-secured metal grille that protrudes only 7mm from its surroundings. The Sheer-Grille can be painted to match your décor, making it virtually indistinguishable from its surroundings. The Sheer-Grille has nearly transparent, ultra-small perforations, and is acoustically inert, for dynamic, unimpeded sound and more uniform coverage, even in larger rooms. The grille's dimensions are 8-7/8" x 20-7/8".
Gold-Plated Spring-Loaded Posts: The in-wall loudspeaker has a gold-plated pair of spring-loaded binding posts that can accept up to 12-gauge wire, single- or dual-banana plugs, or pin connectors.
Applications: You can use the Polk Audio Vanishing Series 265-LS in-wall loudspeaker as the basis for a stealth home theater, or a hidden two-channel stereo pair.
Note: The speaker isn't recommended for installation in high-moisture locations.
Rotating Cam System: The Polk Audio in-wall loudspeaker utilizes a rotating cam system to ensure a secure, vibration-free installation. The 265-LS has 8 rotating cams to hold the speaker in place. The cams can be tightened from the front panel with a Phillips-head screwdriver.
Installation: The 265-LS can be installed in new or existing construction:
|Overall Dimensions (with grille)||Width = 8-7/8" |
Height = 20-7/8"
|Cutout Dimensions||Width = 7-1/4" |
Height = 19-3/16"
|Mounting Depth (behind 1/2" drywall)||Depth = 3"|
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Surround sound [ Spencer Jan 17, 2016 ]
They are awesome speakers! [ Eva Dec 12, 2015 ]
vertical installation is much better [ J Dec 22, 2016 ]
I just installed a pair of the 265 LS speakers on my living room wall. Because of the dimension of them, it was quite obvious that they needed to be installed vertically in between the wall studs. If you installed them horizontally you would need to cut out a section of a stud, which would compromise the integrity of the wall. By the way, I also installed a 255C LS in the wall as the center channel. Wow, what a great match! [ Jerry Dec 22, 2016 ]
Vertically. The center channel of this same like mounts horizontally. [ John Paul Dec 22, 2016 ]
Typically the center channel is meant to be installed the wide way across. The cut out for the width is only 13 1/8" so it will still fit in between your studs. [ JOEL J Dec 21, 2016 ]
I installed the speakers vertically (that is long dimension up and down, narrow dimension right to left). Had no problem. [ Raymond J Dec 21, 2016 ]
Vertically, this is too wide for a standard wall stud that is 16 inches on center. [ Smitty Dec 21, 2016 ]
I currently have the Onkyo TX-NR646 (I believe the new model is the TX-NR656) and have been very pleased witht the overall performance with these speakers. [ Smitty Oct 28, 2016 ]
I forwarded your question to an Advisor and they responded with the following: In a motor coach, these will provide plenty of bass for you. It would not be necessary to add a subwoofer unless you wanted an overpowering, very loud type of bass. The low-end response on these speakers is outstanding. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy Apr 01, 2014 ] Staff