Skip Navigation

Polk Audio FXi A6

Dipole/bipole surround speakers (Black)

26 Reviews | 1 question - 1 answer

Item # 107FXIA6B

Out of Stock

Expected: 6/29/2017 Reserve risk-free

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Overview

Our take on the Polk Audio FXi A6

The Polk FXi A6 surround speakers combine top-notch home theater performance with flexible placement options. These cleverly designed rear-channel speakers feature two tweeters aimed 45° from each other, for an ideal mix of direct and indirect sound.

The Polk FXi A6 surround speakers combine top-notch home theater performance with flexible placement options. These cleverly designed rear-channel speakers feature two tweeters aimed 45° from each other, for an ideal mix of direct and indirect sound.

Dipole/bipole operation for flexible placement
A dipole/bipole switch lets you position the FXi A6s on the rear or side walls of your home theater room — you'll get great results either way. If you place them behind your listening postion, set them to bipole mode for distinct, directional sound. Or set them to dipole mode for side placement, and they'll create a more diffuse soundfield for convincing wraparound effects.

A high-tech approach to accurate sound
Polk carefully designed the drivers using laser testing to help identify and eliminate resonance points. The acoustically inert MDF cabinets fight internal vibrations that can compromise performance. It all adds up to enveloping surround sound that fully immerses you in the movie action.

Got wire?
Most speakers don't include any. Learn about choosing and installing speaker wire at the Crutchfield Learning Center.
Shop our selection of speaker wire.

Quality product that expands sonic experience. This purchase replaced an older set of Polk bookshelf speakers that were used for rear surround sound.

Hall, Stroudsburg, PA

What's in the Box:

  • 1 Black left surround speaker
  • 1 Black right surround speaker
  • 2 Self-tapping screws
  • 8 Self-adhesive rubber feet
  • Owner's Manual (English/French/Spanish)
  • Template
  • Online registration sheet
  • Polk Audio product brochure

Product Highlights:

  • bass-reflex (ported) design
  • frequency response 55-26,000 Hz (-3dB)
  • handles 20-150 watts
  • two 1" silk/polymer tweeters
  • 6-1/2" Dynamic Balance® polymer composite woofer
  • 8-ohm impedance
  • sensitivity 88 dB
  • dipole/bipole switch
  • 5-way binding post terminals
  • voice-matched to Polk's RTi tower and bookshelf speakers and CSi center channel speakers
  • 13-5/16"W x 14-3/4"H x 8-15/16"D
  • warranty: 5 years
  • Our 60-day money-back guarantee
Priced per pair
    Reviews

    Polk Audio FXi A6 Reviews

    Average Customer Review(s):

    (26 Reviews)
    rewards card

    Submit a review and enter to win a $350 rewards card

    Review this product

    Thanks for submitting your review

    Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

    Your Review

    Use the stars below to rate the overall product on a scale of 1-5
    1500
    Upload your photos

    Not visible. Email associated with order.
    (e.g., Charlottesville, VA)

    Additional Fields (optional)

    500
    500

    By submitting this review, you agree to our terms and review guidelines.

    Filter by rating

    Customer photos


    << >>
    Details

    Hands-on research

    Product Research

    Driver Technology
    Enclosure Design
    Connections
    Mounting Options

    Driver Technology

    Dynamic Balance: Dynamic Balance is a proprietary Polk Audio technology using laser imaging to determine what combination of speaker materials create the least amount of resonance. Eliminating resonance in speakers results in a wide, smooth response and low distortion.

    Polymer Composite Woofers: Each speaker features a 6.5" polymer composite woofer for smooth wide-range response with low distortion. For high performance durability, each woofer uses a butyl rubber surround.

    Silk/Polymer Tweeters: Each speaker has dual 1" silk/polymer dome tweeters that provide clear, detailed highs and spacious surround effects. Each tweeter uses a heat sink on the Neodymium magnet for superior heat dissipation, power handling and reliability.

    Frequency Response: The overall frequency response is 45Hz-27kHz and the -3dB frequency response is 55-26kHz.

    Enclosure Design

    Enclosure: Each enclosure has a triangular shape with the speaker faces angled at 45 degrees. One face has a tweeter and a woofer, while the other face has a tweeter and port tube opening. A switch for selecting Dipole or Bipole operation is located on the rear of the speaker above the speaker's 5-way binding post speaker terminals. One of the speakers is specifically designed for the "left" channel and the other for the "right" channel.

    Acoustically Inert Cabinets: Each speaker cabinet features all-MDF construction with internal bracings that virtually eliminate sound-muddying resonance. The speakers are finished in either a black or white laminate finish.

    Anti-Diffraction Grilles: The floating anti-diffraction grilles minimize grille diffraction for spacious, 3-dimensional imaging.

    Port: On the side with only a tweeter, there is a single port tube opening for increased and extended bass response.

    Connections

    5-Way Binding Posts: The gold-plated 5-way binding posts will accept bare wire, pin connectors, spade connectors, banana plugs, and dual banana plugs.

    Mounting Options

    Dipole/Bipole Switch: There is a switch that allows each speaker to be used as a Dipole (out of phase) or Bipole (in phase) speaker. If you're mounting the speakers on the side walls in line with your listening position, the dipole mode will create a diffuse, ambient soundfield. If you're placing them behind your position, the bipole mode fires the drivers in phase to flood your room with surround sound. When used with a Dolby Digital system, the surround speaker setting should be set to small.

    Wall Mounting: The bracket on the back of each speaker has two keyhole slots, allowing the speaker to be mounted on the wall using the supplied 2-1/2" wood screws.

    Our Product Research Team

    At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

    Accessories
    Q & A

    Customer Q&A

    Crutchfield asked  
    Why did you buy this?

    I've never had surround sound before, and I will never need to upgrade from these. Movies are awesome now. [ steven  Jun 08, 2017 ]
    Polk = Old school, high quality products at prices that allow you to still put kids through college. [ WESLEY  Mar 03, 2017 ]
    The specs looked really good. Have old polk lsi7 speakers and this will make a complete surround sound system [ Rodlet  Jan 30, 2016 ]

    1 question already asked

    I do not have any recommendations on stands for these speakers, I actually have them mounted on my wall as rear speakers. I did this because of the layout that I have in my basement, because they play sound in two different directions it's perfect as the rear on my surround sound 9.2 and they also act as speakers for my bar which is located behind the surround [ Dante  Nov 23, 2016 ]
    Articles