Skip Navigation

Infinity 1062w

Reference Series 10" subwoofer with dual 4-ohm voice coils

13 Reviews | 4 questions - 6 answers

Item # 1081062W

This item is no longer available.

Shop all Component Subwoofers

Overview

Our take on the Infinity 1062w

An Infinity Reference subwoofer makes every deep note of your music count. Whether you listen to jazz, rock, hip-hop, country, or all of the above, you'll hear and feel satisfying bass with this sub in your car.

An Infinity Reference subwoofer makes every deep note of your music count. Whether you listen to jazz, rock, hip-hop, country, or all of the above, you'll hear and feel satisfying bass with this sub in your car.

The 10" Reference 1062w offers a classy, no-nonsense look, with a high-gloss polypropylene cone that's accurate and hard-hitting. The durable large-roll rubber surround provides smooth, extended excursion with reduced distortion so you get impressive bass performance. Dual 4-ohm voice coils make it easy to draw big power from a compatible low-impedance amplifier or safely hook up a multi-sub system for heavy-duty low end.

The 1062w's unique motor structure cuts down on the mounting depth, and this sub works in sealed, ported, and bandpass enclosures so you get bass the way you want it. And since you want your investment to last, the 1062w features plenty of internal cooling to protect the sub's inner workings and keep it performing at its peak.

Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible. Most 2-channel car amplifiers are stable down to 2 ohms in standard mode, or 4 ohms in bridged operation. Most mono amps are stable down to 2 ohms.

To drive this single subwoofer, we recommend a mono amplifier rated between 200 and 400 watts RMS at 2 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.


Priced per speaker

So far, so good. These replaced some worn out SVC JL 10". These sound great, but, I may have to get a larger amp to power them.

Nick, Johnson City, TN

What's in the Box:

  • 10" DVC 4-ohm woofer
  • Self-adhesive foam gasket
  • Instructions
  • Technical Data sheet
  • Warranty card

Product Highlights:

  • 10" subwoofer with dual 4-ohm voice coils
  • polypropylene woofer cone with large-roll rubber surround
  • progressive spider design for excellent cone control
  • frequency response: 25-400 Hz
  • power range: 100-275 watts RMS (1,100 watts peak power)
  • sensitivity: 91 dB
  • top-mount depth: 5-7/8"
  • sealed box volume: 0.75 cu. ft.
  • ported box volume: 1.75 cu. ft.
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Infinity 1062w Reviews

Average Customer Review(s):

(13 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Product Research

Features
Enclosure Compatibility

Features

High-efficiency Polypropylene Woofer Cone: This lightweight and popular material is used to ensure maximum woofer efficiency. The benefit is high output with modest amplifier power.

Large-roll Rubber Surround: The large-roll rubber surround provides optimum cone-edge suspension and absorbs distortion that may travel up the cone edge, ensuring clean, tight bass.

Dual 4-ohm Voice Coils: This woofer features dual 4-ohm voice coils that offer flexibility in wiring. When the voice coils are wired in parallel with each other, the woofer presents a 2-ohm mono load. When the voice coils are wired in series with each other, the woofer presents an 8-ohm mono load. In addition, each coil may be connected to a different amplifier channel and each channel will see a 4-ohm load.

Proprietary Basket: The unique in-board motor structure reduces the overall mounting depth, without limiting enclosure options.

Vented Polepiece: The vented polepiece provides additional cooling of the motor structure, thus increasing power handling.

Progressive Spider: The subwoofer uses a progressive spider, which provides better control at excursion limits than more commonly used linear spiders. The result is reduced distortion at high output levels.

Enclosure Compatibility

Sealed Box Volume: Infinity recommends a sealed enclosure with an internal volume of 0.75 cu/ft. Sealed enclosures provide the most control over a woofer, will handle more power, and provide more accurate sonic reproduction, making them suitable to all types of music.

Ported Box Volume: Infinity recommends a ported enclosure with an internal volume of 1.75 cu/ft with one 3" diameter x 4.75" long port. Ported (or vented) enclosures provide better efficiency in the 40-50Hz range, and are suitable for use with small amplifiers, giving you more bass output from less power. However, this efficiency comes at the expense of sound quality at low frequencies (40Hz and below), and control.

Bandpass Box Volume: Infinity recommends a bandpass enclosure with an internal volume of 2.0 cu/ft. The enclosure has a sealed chamber volume of 1.0 cu/ft and a ported chamber volume of 1.0 cu/ft with one 4" diameter x 7.875" long port. Bandpass enclosures often provide the most output available from any amplifier and subwoofer combination at the expense of sonic accuracy. If sheer SPL is desired most, a bandpass enclosure is recommended.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

4 questions already asked

Yes [ Anthony C.  Dec 22, 2014 ]
I personally wouldn't try it, but I feel like if you were to do it without blowing the sub you'd have to lower the wattage you have going to the sub. You will also have to have a 1-ohm stable amp. [ Mitchell  Dec 21, 2014 ]
No, dual voice coils at 4 ohms each will enable you to wire it down to two ohms, if wired parallel. [ LINDA  Dec 21, 2014 ]
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy  Nov 06, 2014 ]  Staff
Not noticably. it rests along the bottom of the magnet. [ Sean  Jul 10, 2014 ]
Articles