Plus One Woofer Cones: The Plus One speakers use cones more surface area than
other speakers of the same size. This is accomplished by using a new basket
design and hi-roll surround. The Plus One design offers greater bass output and
a significant increase in efficiency.
Woven Glass Fiber Woofer Cones: This woven-glass-fiber material is very light and extremely
stiff, minimizing cone flex. This results in very low distortion and improved
Edge Driven MMD Dome Tweeters:
Each speaker has an Edge-driven MMD (Metal Matrix Diaphragm) dome tweeter. The
benefit is increased power handling and reduced distortion at high output. This
technology also allows for better integration with the mid/woofer. The tweeter
has an adjustable output level, +0 dB (flat) and -3 dB.
UniPivot Tweeter: The tweeter
is angled and can be rotated about 270° after installation. This allows you to
direct the tweeters toward the listeners, very useful for speakers mounted low
in a door.
High-Output Design: The
high output 2-ohm voice coil design compensates for the high in-line resistance
of small gauge factory wiring and extracts every watt from factory receivers, increasing overall system output and efficiency (relative to
4 ohm speakers). The speaker's 2.0-ohm impedance combined with the impedance of your speaker wire provides a true 4-ohm load to your connected headunit or amplifier. The speakers also benefit from increased power when you upgrade
the wire and add aftermarket amplifiers, designed to power a 2-ohm load.
Crossovers: Kappa speakers include computer-optimized, voice-matched crossovers,
using audiophile quality air core inductors and polypropylene capacitors. The crossover slope is 12 dB/octave.
Crossover Connections: Each
crossover is connected to the speaker by a 6" wire. The input terminals are
set screws that will accept up to 10 gauge bare wire.
- Length: 3-1/16"
- Width: 1-1/4"
- Height: 1-3/16"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.