Skip Navigation

Infinity Reference 6022i

6-1/2" 2-way car speakers
For 6-1/2" and 6-3/4" openings

45 Reviews

Watch a product review

Find what fits your vehicle

Can't find your exact vehicle?

Item # 1086022I

This item is no longer available.

Shop all 6-1/2" Speakers

Overview

Our take on the Infinity Reference 6022i

Install Infinity Reference 6022i 6-1/2" speakers in your car and change the way you think about long road trips and traffic jams. Reference speakers play your music boldly and cleanly, making your listening time more enjoyable.

Install Infinity Reference 6022i 6-1/2" speakers in your car and change the way you think about long road trips and traffic jams. Reference speakers play your music boldly and cleanly, making your listening time more enjoyable.

Reference speakers feature low impedance so they extract maximum power from any amplifier or car stereo. Infinity makes their Plus One+ woofers 30% larger than other speakers in the same size category. As a result, you'll enjoy deeper bass and higher efficiency for an impressive performance.

The textile dome tweeters feature oversized voice coils that match the tweeters' diameter, a design that provides more surface area for heat dissipation and allows higher power handling. You can adjust the sound to your liking with the tweeter level control. In addition, you can swivel the tweeters up to 350 degrees, aiming them directly at you for a more focused soundstage. You'll hear smoother, more accurate response, with more sparkle and detail in your music.

Infinity makes sure that your installation stays stress-free by including Intermount III, a proprietary mounting system that allows you to install these 6-1/2" speakers in a variety of 6" to 6-3/4" factory locations. You'll also find adapters that fit many domestic and imported cars.

Important Note: These Infinity speakers use a low impedance design to pull more power safely from your car stereo or amplifier. This design is compatible with virtually all factory and aftermarket stereos.


Priced per pair

The bass that is coming out of these speakers is incredable. I did not realize just how bad the other speakers actually where. The installation was a snap I had them installed probably withing an hour.

Ed, Warwick, RI

Featured Video:

What's in the Box:

  • Two 2-way speakers
  • 2 Grilles
  • 2 Grille frames
  • 2 Metal mounting rings
  • 2 Plastic mounting rings (includes GM/Chrysler 6-3/4G)
  • Eight 1" Self-tapping screws
  • 8 Machine screws
  • 8 Speed clips
  • 2 Strips of self-adhesive foam
  • Instructions
  • Warranty card

Product Highlights:

  • 2-way car speakers for 6-1/2" and 6-3/4" locations (pair)
  • Plus One+ injection-molded polypropylene (IMPP) woofer cone with hi-roll rubber surround
  • 1" rotating UniPivot textile dome tweeter
  • Intermount III mounting system for fit in 6-3/4" openings
  • True Four Ohm Impedance technology: speaker's 2-ohm impedance combines with speaker wire impedance for a 4-ohm load
  • compatible with virtually all factory or aftermarket car stereos
  • power range: 2-60 watts RMS (180 watts peak power)
  • frequency response: 53-21,000 Hz
  • sensitivity: 93.4 dB
  • top-mount depth: 1-7/8"
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Infinity Reference 6022i Reviews

Average Customer Review(s):

(45 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

General
Speaker Size 6 1/2
Design 2-way
Tweeter Design 1" Dome
Tweeter Composition Textile
Woofer Composition IMPP
Woofer Surround Hi-roll rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) 87.5
Sensitivity at 2.83 volts 93.4
Frequency Response 53 - 21k Hz
Minimum RMS Wattage 2
Maximum RMS Wattage 60
Peak Power Handling (Watts) 180
Impedance (Ohms) 4
Top-mount Depth (Inches) 1 7/8
Bottom-mount Depth (Inches) N/A
Cutout Diameter or Length (inches) 5

Product Research

Features

Plus One+ Woofer Cones: Each speaker uses a cone significantly larger than other speakers of the same size. This is accomplished by using a unique basket design and hi-roll surround. The Plus One+ design offers greater bass output and a significant increase in efficiency.

Woofer Materials: Each woofer is constructed from Injection-Molded Polypropylene. This process of cone molding assures a uniform cone thickness for superior linearity and clarity. It is also lighter weight and more rigid for decreased distortion and improved bass response.

Hi-roll Rubber Surrounds: The hi-roll rubber surrounds allow the woofers a greater range of movement, resulting in longer X-max and more bass output.

Textile Dome Tweeters (UniPivot Design): Each speaker uses an edge-driven textile dome tweeter for smooth, accurate highs. The UniPivot design allows the tweeter to be pointed at the listeners location even when the speaker is mounted off axis. This optimizes the stereo image and ensures a more uniform response. The tweeter housing can be turned approximately 315 degrees.

Note: The tweeters are not made to turn 360 degrees. If they are turned 360 degrees or more, they will be damaged.

Tweeter Level Control: A switch on the front of the tweeter allows you to boost the tweeter output 3dB, useful if the speakers are mounted low in a door where high frequencies are easily absorbed.

True Four Ohm Impedance Technology: The speaker's 2.65-ohm impedance combined with the impedance of your speaker wire provides a true 4-ohm load to your connected head unit or amplifier.

Mounting: Infinity's mounting system allows the 6022i speakers to fit in 6-1/2" and 6-3/4" applications. Metal and plastic adapter rings are included for each speaker.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Staff Reviews

Product reviews from the Crutchfield Labs

Video: Infinity Reference car speakers
by Robert Ferency-Viars, Ken Nail

Crutchfield experts discuss some of the features that make Infinity Reference Series car speakers such a popular choice.

What are the Labs?
Articles