Why Choose Crutchfield?
Great gear and expert advice
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
Deep discounts on car installation gear
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Trusted since 1974
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Infinity Kappa 60.3cs
6-1/2" Component Speaker System
Item #: 108603CS
This item is no longer available.
Infinity Kappa 60.3cs
Our take on the Infinity Kappa 60.3cs
Infinity's Kappa 60.3cs 6-1/2" component system brings dazzling sound quality to your car, thanks to Ceramic-Metal Matrix Diaphragm technology. First developed for Infinity's state-of-the-art home speaker systems, C.M.M.D.s are made by bonding an aluminum cone with two surrounding layers of ceramic, forming a high-performance driver of superior accuracy.
The 6-1/2" C.M.M.D. woofer (with cast polymer basket) and 1" C.M.M.D. dome tweeter create sonic perfection, while an audiophile-quality 2-way crossover (computer matched to this system) provides flawless matching of components. The tweeter can be flush-, surface-, or angle-mounted for optimum imaging. 3-year warranty.Details:
- C.M.M.D. 6-1/2" woofer with rubber surround Plus One design cone is 30% larger than standard 6-1/2"s
- 1" C.M.M.D. dome tweeter can be flush-, surface-, or angle-mounted
- high-quality 2-way crossovers (high-pass/low-pass at 3500 Hz, 18 dB per octave)
- frequency response 45-21,000 Hz
- power range 2-90 watts RMS
- peak power handling 270 watts
- sensitivity 90 dB
- top-mount depth 2-1/16"
What's in the Box:
- 2 Woofers
- 2 Grilles
- 2 Grille frames
- 2 Crossovers
- 2 Tweeters (each with attached 5" speaker leads)
- 2 Flush-mount cups
- 2 Threaded flush-mount adapters
- 2 Plastic locking nuts
- 2 Surface-mount cups
- Four 1/2" self-tapping screws
- 8 Machine screws (each screw has a flat washer)
- 2 Nuts
- 2 Clip washers
- 2 Plastic GM/Chrysler adapter brackets
- 2 Metal 4-hole 6-1/2" adapter rings
- 2 Metal multi-hole 6-3/4" adapter rings
Features and Specs
|Speaker Size||6 1/2|
|Woofer Surround||Hi-roll rubber|
|Parts Warranty||3 YEARS|
|Labor Warranty||3 YEARS|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||90|
|Frequency Response||45 - 21k Hz|
|Minimum RMS Wattage||2|
|Maximum RMS Wattage||90|
|Peak Power Handling (Watts)||270|
|Top-mount Depth (Inches)||2 1/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||5 1/16|
C.M.M.D. Plus One Woofer Cones: These speakers use cones approximately 30% larger than other speakers of the same size. This is accomplished by using a new basket design and hi-roll surround. The Plus One design offers greater bass output and a significant increase in efficiency. In addition, the C.M.M.D. cones virtually eliminate coloration due to cone flexing, resulting in less distortion and superior accuracy.
Surrounds: The hi-roll rubber surrounds allow the woofers a greater range of movement, resulting in longer X-max and more bass output.
Adapter Rings: These speakers come with three different mounting adapters. The adapters allow the speakers to be installed in a 6-1/2" opening, a 6-3/4" opening, or an oversized 6-3/4" GM/Chrysler opening.
Tweeter Materials: Each tweeter features a 1" C.M.M.D. dome that offers superior stiffness and damping compared to traditional metal domes. Each tweeter is driven by a powerful neodymium magnet, resulting in higher power handling and superior detail.
"I-Mount" Tweeter Mounting System: Surface mounting involves mounting the surface mount cup (using the supplied screws), then snapping the tweeter into the cup. Flush mounting is made easy through the use of the threaded flush mount adapter and plastic locking nut. For flush mounting, the tweeter is snapped into the flush mount cup. Then, the cup is secured to the flush mount adapter with a nut and clip washer. Once a cutout is made, the flush mount adapter (with the tweeter installed) is inserted into the hole. The large plastic locking nut is threaded onto the adapter (from behind the mounting surface) to hold the complete assembly securely in place. When flush mounted, the tweeters may be angled for optimum response and imaging. There are no provisions for angled surface mounting of the tweeters.
Tweeter Mounting Dimensions:
|Surface Mount||Flush Mount|
|Depth||(0.459" screw depth)||1.157"|
2-Way Crossovers: These speakers include computer-optimized, voice-matched crossovers. Each crossover features an 18dB/octave, 3.5kHz high-pass network for the tweeter and an 18dB/octave, 3.5kHz low-pass network for the woofer.
Input/Output Connections: The crossover inputs and outputs are gold-plated screw terminals.
Mounting: There are two mounting holes in the base of each crossover.
Crossover Dimensions: L=4.263", W=3.062", H=1.389"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.