Skip Navigation

Infinity Reference 6432cfp

4"x6" 2-way plate speakers

6 Reviews

Watch a product review

Find what fits your vehicle

Can't find your exact vehicle?

Item # 1086432CFP

This item is no longer available.

Shop all 4"x6" Speakers

Overview

Our take on the Infinity Reference 6432cfp

Rely on Infinity to revitalize the sound in your car. Replace your tired-out, old factory speakers with Reference Series full-range speakers that'll play your music louder and better.

Rely on Infinity to revitalize the sound in your car. Replace your tired-out, old factory speakers with Reference Series full-range speakers that'll play your music louder and better.

Infinity Reference 6432cfp 4"x6" plate speakers feature a Plus One+ woofer design that maximizes cone surface area so you enjoy richer, deeper lows. Large textile dome tweeters project smooth, clean highs, and they're equipped with a level control so you can fine-tune the degree of brightness to match your taste. Large voice coils in the edge-driven textile dome tweeters allow for high power-handling. The woofer and tweeter are mounted separately so you get the superior sound of components in a plate that installs easily in your 4"x6" opening.

Important Note: These Infinity Reference speakers use a low impedance design to pull more power safely from your car stereo or amplifier. This design is compatible with virtually all factory and aftermarket stereos.

Installation Note: These Infinity speakers do not include screws or speed clips. You may be able to use the factory screws to install them, but it's always a good idea to have an assortment of self-tapping screws (5/8" to 1") and speed-clips on hand.

Priced per pair

I have these in my rear doors on a 06 ext cab silverado. I have a amp connected to them and am very happy with the sound and performance.

Anonymous, Kansas

Featured Video:

What's in the Box:

  • Two 2-way 4x6" plate-speakers
  • 2 Adhesive foam gaskets
  • Specifications sheet
  • Warranty sheet
  • Infinity logo sticker
  • Cut-out template on box

Product Highlights:

  • 4"x6" 2-way plate speakers (pair)
  • Plus One+ Injection-Molded Polypropylene (IMPP) woofer cone with hi-roll rubber surround
  • 1" edge-driven textile dome tweeter
  • True Four Ohm Impedance technology: speaker's 2-ohm impedance combines with speaker wire impedance for a 4-ohm load
  • compatible with virtually all factory or aftermarket car stereos
  • power range: 2-45 watts RMS (135 watts peak power)
  • frequency response: 72-21,000 Hz
  • sensitivity: 91 dB
  • top-mount depth: 1-15/16"
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Infinity Reference 6432cfp Reviews

Average Customer Review(s):

(6 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

General
Speaker Size 4X6
Design 2-way
Tweeter Design 1" Edge-driven Dome
Tweeter Composition Textile
Woofer Composition IMPP
Woofer Surround Hi-roll rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) N/A
Sensitivity at 2.83 volts 91
Frequency Response 72 - 21k Hz
Minimum RMS Wattage 2
Maximum RMS Wattage 45
Peak Power Handling (Watts) 135
Impedance (Ohms) 4
Top-mount Depth (Inches) 1 15/16
Bottom-mount Depth (Inches) N/A
Cutout Diameter or Length (inches) 0

Product Research

Features

Plus One+ Woofer Cones: Each speaker uses a cone significantly larger than other speakers of the same size. This is accomplished by using a unique basket design and hi-roll surround. The Plus One+ design offers greater bass output and a significant increase in efficiency.

Woofer Materials: Each woofer is constructed from Injection-Molded Polypropylene. This process of cone molding assures a uniform cone thickness for superior linearity and clarity. It is also lighter weight and more rigid for decreased distortion and improved bass response.

Hi-roll Rubber Surrounds: The hi-roll rubber surrounds allow the woofers a greater range of movement, resulting in longer X-max and more bass output.

Textile Dome Tweeters: Each speaker uses an edge-driven textile dome tweeter for smooth, accurate highs. A switch on the front of the tweeter allows you to boost the tweeter output 3dB, useful if the speakers are mounted low in a door where high frequencies are easily absorbed.

True Four Ohm Impedance Technology: The speaker's 2.0-ohm impedance combined with the impedance of your speaker wire provides a true 4-ohm load to your connected headunit or amplifier.

Mounting: The speakers can be mounted in a metric 4"x6" opening, or a U.S. standard 4"x6" opening.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Articles