Skip Navigation

Infinity Reference 9632cf

6"x9" 2-way car speakers

10 Reviews

Watch a product review

Find what fits your vehicle

Can't find your exact vehicle?

Item # 1089632CF

This item is no longer available.

Shop all 6"x9" Speakers

Overview

Our take on the Infinity Reference 9632cf

Rely on Infinity to revitalize the sound in your car. Replace your tired-out, old factory speakers with Reference Series full-range speakers that'll play your music louder and better.

Rely on Infinity to revitalize the sound in your car. Replace your tired-out, old factory speakers with Reference Series full-range speakers that'll play your music louder and better.

Infinity Reference 9632cf 6"x9" speakers feature a Plus One+ woofer design that maximizes cone surface area so you enjoy richer, deeper lows. Large textile dome tweeters project smooth, clean highs, and their large voice coils allow for high power-handling. They're equipped with a level control so you can fine-tune the degree of brightness to match your taste. Grilles are not included — factory grilles are appropriate for most installations, but optional grilles are available.

Important Note: These Infinity Reference speakers use a low impedance design to pull more power safely from your car stereo or amplifier. This design is compatible with virtually all factory and aftermarket stereos.

Installation Note: These Infinity speakers do not include screws or speed clips. You may be able to use the factory screws to install them, but it's always a good idea to have an assortment of self-tapping screws (5/8" to 1") and speed-clips on hand.

Priced per pair

Nicely made and heavy. The mid and high range sound was adequate but not crystal clear. The separate volume control worked but didn't improve the clarity. The bass is clear and strong at low volume. At mid to high volume the bass hits hard, clean and impressive.

Lon, Lancaster, SC

Featured Video:

What's in the Box:

  • Two 6x9" 2-way speakers
  • 2 Bottom-mount brackets
  • 2 Adhesive backed foam strips
  • Instructions
  • Warranty information
  • Infinity logo sticker

Product Highlights:

  • 6"x9" 2-way speakers (pair)
  • Plus One+ Injection-Molded Polypropylene (IMPP) woofer cone with hi-roll rubber surround
  • 1" UniPivot edge-driven, textile dome tweeter
  • True Four Ohm Impedance technology: speaker's 2-ohm impedance combines with speaker wire impedance for a 4-ohm load
  • compatible with virtually all factory or aftermarket car stereos
  • power range: 2-100 watts RMS (300 watts peak power)
  • frequency response: 46-21,000 Hz
  • sensitivity: 94 dB
  • top-mount depth: 3-1/16"
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Infinity Reference 9632cf Reviews

Average Customer Review(s):

(10 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

General
Speaker Size 6X9
Design 2-way
Tweeter Design 1" Edge-driven Dome
Tweeter Composition Textile
Woofer Composition IMPP
Woofer Surround Hi-roll rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) N/A
Sensitivity at 2.83 volts 94
Frequency Response 46 - 21k Hz
Minimum RMS Wattage 2
Maximum RMS Wattage 100
Peak Power Handling (Watts) 300
Impedance (Ohms) 4
Top-mount Depth (Inches) 3
Bottom-mount Depth (Inches) 3 5/8
Cutout Diameter or Length (inches) 0

Product Research

Features

Plus One+ Woofer Cones: Each speaker uses a cone significantly larger than other speakers of the same size. This is accomplished by using a unique basket design and hi-roll surround. The Plus One+ design offers greater bass output and a significant increase in efficiency.

Woofer Materials: Each woofer is constructed from Injection-Molded Polypropylene. This process of cone molding assures a uniform cone thickness for superior linearity and clarity. It is also lighter weight and more rigid for decreased distortion and improved bass response.

Hi-roll Rubber Surrounds: The hi-roll rubber surrounds allow the woofers a greater range of movement, resulting in longer X-max and more bass output.

Textile Dome Tweeters (UniPivot Design): Each speaker uses an edge-driven textile dome tweeter for smooth, accurate highs. The UniPivot design allows the tweeter to be pointed at the listeners location even when the speaker is mounted off axis. This optimizes the stereo image and ensures a more uniform response. The tweeter housing can be turned approximately 315 degrees.

Tweeter Level Control: A switch on the front of the tweeter allows you to boost the tweeter output 3dB, useful if the speakers are mounted low in a door where high frequencies are easily absorbed.

Mounting: Infinity's mounting system allows the 6932cf speakers to fit in top-mount and bottom-mount 6"x9" applications.

Optional Grilles: The speakers do not come with any grilles. Optional grilles (108REF9632) can be purchased separately.

True Four Ohm Impedance Technology: The speaker's 2.0-ohm impedance combined with the impedance of your speaker wire provides a true 4-ohm load to your connected headunit or amplifier.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Articles