Skip Navigation

Infinity Kappa Perfect 10.1

10" 4-ohm subwoofer

45 Reviews

Item # 108PER101

This item is no longer available.

Shop all Component Subwoofers

Overview

Our take on the Infinity Kappa Perfect 10.1

The Infinity Kappa Perfect 10.1 10" subwoofer combines a rugged aluminum cone and high-roll butyl-rubber surround to produce slammin' bass all the way down to 18 Hz. The super-rigid woofer cone won't distort (even when you push it hard), but it's light and responsive for remarkably high sensitivity. That means it'll squeeze the most volume out of the power you feed it.

Got enough juice? Get an amp for your new sub The Infinity Kappa Perfect 10.1 10" subwoofer combines a rugged aluminum cone and high-roll butyl-rubber surround to produce slammin' bass all the way down to 18 Hz. The super-rigid woofer cone won't distort (even when you push it hard), but it's light and responsive for remarkably high sensitivity. That means it'll squeeze the most volume out of the power you feed it.

The massive cast-aluminum basket and the pole-piece are vented so the 4-layer voice coil stays cool, even when the music gets hot. Infinity has subjected these subs to the most intensive testing in the industry — 100 grueling hours of performance at their full RMS rating (350 watts).

The Perfect 10.1 bridges the gap between subs intended for SPL and those intended for sound quality, creating bass that hits hard and sounds great. Whether you're planning a competition system or just looking for powerful bass, this sub's ready for action.

Details:

  • 10" 4-ohm subwoofer
  • aluminum cone with high-roll butyl-rubber surround
  • massive cast-aluminum basket
  • suitable for free-air use (handles up to 175 watts in free-air applications)
  • recommended power range: 75-350 watts RMS
  • peak power handling: 1,400 watts
  • frequency response: 18-200 Hz
  • sensitivity: 94 dB
  • top mount depth: 5-3/4"
  • sealed box volume: 0.6 cu. ft.
  • ported box volume: 1.0 cu. ft.
  • Recommended Q-Logic Box Type: 1, 2
  • warranty: 3 years

Priced per speaker

Great sounding sub just wish it came with mounting screws. By the way this sub will not fit in the MTX Thunderform box for a 2001 f150 without a little modification.

shaun vanskiver, Sumter, SC

What's in the Box:

  • One 10" woofer
  • 1 Self-adhesive foam gasket
  • Instructions
  • Technical Data sheet
  • Warranty card
  • "Infinity" sticker
Reviews

Infinity Kappa Perfect 10.1 Reviews

Average Customer Review(s):

(45 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Product Research

Features
Enclosure Compatibility

Features

Curvilinear Aluminum Cone: The curvilinear aluminum cone is lightweight and extremely rigid for low distortion and superior bass response.

High-roll Butyl Surround: The high-roll butyl surround damps cone resonance and ensures longevity.

Cast-Aluminum Basket: The non-resonant cast aluminum basket ensures perfect alignment of the speaker's moving parts.

Flat Uniform-roll Spider: The spider design provides maximum control over cone motion at the limits of the speaker's excursion, and reduces even-order harmonic distortion compared to cupped spiders.

Vented Pole Piece: A flared, polished and vented pole piece is used to provide optimum cooling of the voice coil and minimize turbulence.

1.5" 4-layer Voice Coil and Stacked Magnets: The 1.5" 4-layer voice coil and stacked magnets provide high motor force and room for ultra-long excursion.

Gold-plated 5-way Binding Posts: The gold-plated 5-way binding posts will accept pin connectors, spade connectors, banana plugs, dual banana plugs, and bare wire.

Enclosure Compatibility

Recommended Sealed Box Volume: Infinity recommends a sealed enclosure with an internal volume of 0.6 cu/ft.

Recommended Ported Box Volume: Infinity recommends a ported enclosure with an internal volume of 1.0 cu/ft. One 3" diameter x 10.4" long port should be used with a 1.0 cu/ft enclosure.

Recommended Sealed Bandpass Box Volume: Infinity recommends a bandpass enclosure with an internal volume of 0.95 cu/ft. The 0.95 cu/ft enclosure should have a sealed chamber volume of 0.6 cu/ft and a ported chamber volume of 0.35 cu/ft. One 3" diameter x 10.04" long port should be used in the ported chamber.

Free-air Mounting: In addition to being compatible with sealed, ported and bandpass enclosures, the woofer can be used in free-air applications. A free-air subwoofer is designed to be mounted on a baffle board, which separates two areas of the vehicle. For instance, you could mount this woofer to a board attached to the rear deck or placed in the trunk against the rear seat. The trunk acts as the enclosure housing the subwoofer.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Articles