Cone Materials: The
woofer cone's deep anodized-aluminum construction provides extremely high
stiffness for its moving mass, allowing the speakers to reproduce deep-bass
frequencies at high levels. The
woofers feature 1.5" voice coils.
Butyl Rubber Woofer Surrounds:
The butyl rubber surround has greater internal loss than
standard urethane, preventing harmonic distortion at higher frequencies. It more
efficiently absorbs edge reflections that can cause audible distortion,
resulting in clearer bass performance.
1" tweeters feature an
anodized-aluminum dome suspended by a rubber surround. The tweeters are
driven by a powerful neodymium magnet, resulting in higher power handling and
superior detail. The rubber surround helps reduce the resonant frequency
of the tweeter, giving you cleaner, more accurate reproduction.
Mounting System: Surface mounting involves mounting the surface mount
cup (with two screws), then snapping the tweeter into the cup. Flush mounting is
made easy through the use of the threaded flush mount adapter and plastic
locking nut. For flush mounting the tweeter is snapped into the flush mount cup.
Then the cup is secured to the flush mount adapter with a nut and clip washer.
Once a cutout is made, the flush mount adapter (with the tweeter installed) is
inserted through the hole. The large plastic locking nut is threaded onto the
adapter (from behind the mounting surface) to hold the complete assembly
securely in place. When flush mounted, the tweeters may be angled for optimum
response and imaging. There are no provisions for angled surface mounting of the
Tweeter Output Level:
Each crossover has 3 adjustments that allow you to select the tweeter output
level according to system requirements and personal preference. The adjustments
may be set to "-4dB", "5dB" or "0dB".
included crossovers use a 24dB/octave, 3500Hz high pass filter for the tweeters
and a 24dB/octave, 3500Hz low pass filter for the woofers.
are 4 mounting holes in the base of each crossover; screws to mount the
crossovers are not supplied. The crossovers are not weather proof, so they
should not be mounted in locations, such as door panels, that will expose them
to direct contact with water.
Plated Crossover Terminals: The
crossover terminals are gold plated for corrosion resistance.
screw depth) ||1.125" |
Diameter ||1.643" ||2.005" |
|Cutout Diameter ||NA ||1.768" |
Dimensions: W = 5.913", H =
1.546", D = 4.485"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.