Why Choose Crutchfield?
Great gear and expert advice
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
Deep discounts on car installation gear
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Trusted since 1974
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Infinity Reference 1300a
Mono subwoofer amplifier — 300 watts RMS x 1 at 2 ohms
Item # 108R1300A | MFR # REFERENCE 1300A
This item is no longer available.
Our take on the Infinity Reference 1300a by Crutchfield's Buck Pomerantz
Infinity's Reference Series amplifiers offer impressive power and extensive controls for fine-tuning your sound an ideal way to boost your music's intensity and clarity. Strict reliability testing results in durable, dependable amplifiers, and their compact size gives you more installation options in tight places.
The Reference 1300a mono subwoofer amplifier ensures steady power delivery, thanks to its highly efficient Class D design. This powerful amp will satisfy your inner bass head, delivering up to 300 watts RMS to your subwoofer system. And every Infinity Reference amplifier is certified to deliver power as advertised.
Adjust the amp's variable low-pass filter and bass boost to get more efficient output and cleaner low-end kick from your sub/enclosure combo. Preamp outputs simplify hookup to another amp in your system, so system building is quick and easy. Direct-connect terminals make reliable connections without any crimping or soldering.
It fits just perfectly for my 2005 Chevy Colorado Reg Cab mounted under the passenger seat. It powers a 10-inch Kicker Comp. without a problem. And with the optional controller, it's awesome. Highly recommend.
Vcpbp101, San Antonio, TX
What's in the Box:
- Mono amplifier
- Three 20A ATO fuses (installed)
- Warranty/Product Registration card
- mono subwoofer amplifier
- 200 watts RMS x 1 at 4 ohms (300 watts RMS at 2 ohms)
- CEA-2006 compliant
- variable low-pass filter (32-320 Hz, 12 dB/octave)
- variable bass boost (0-6 dB at 50 Hz)
- Class-D amplifier design
- MOSFET power supply
- preamp-level inputs and outputs
- fuse rating: 20A x 3
- 4-gauge power and ground leads recommended wiring and hardware not included with amplifier
- 14-3/4"W x 2-11/16"H x 9"D
- warranty: 1 year
- Our 60-day money-back guarantee
Infinity Reference 1300a Reviews
Average Customer Review(s):
Thanks for submitting your review
Features and Specs
|RMS Power Output (Watts x Channels)||
200 x 1
|Peak Power Output (Watts x Channels)||342 x 1|
|Power at 2 Ohms (Watts x Channels)||300 x 1|
|Bridged Power (Watts x Channels)||N/A|
|Minimum Impedance Bridged||N/A|
|Minimum Impedance Unbridged||2|
|Best Frequency Response||11-330 Hz|
|THD at Rated RMS Power||1%|
|Signal to Noise Ratio||85 dB|
|Low-Pass Crossover Frequency||32-320 Hz|
|Low-Pass Slope (dB/octave)||12 dB|
|High-Pass Crossover Frequency||N/A|
|High-Pass Slope (dB/octave)||N/A|
|Bass Boost||0-6 dB|
|Bass Boost Frequency||50 Hz|
|Speaker Level Inputs||No|
|Preamp Outputs||1 pair|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
CEA-2006 Compliant: CEA-2006 is a new system of testing & measurement methods for mobile audio amplifiers. This voluntary standard advocates a uniform method for determining an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4-ohm load, with 1% or less Total Harmonic Distortion (THD) plus noise, and at a frequency range of 20 Hz to 200 Hz, when applicable. Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4 ohms. CEA-2006 allows consumers to compare car amplifiers and receivers on an equal basis. The Infinity Reference 1300a under CEA-2006 regulations is rated at 200 Watts RMS x 1 channel with a 85dBA signal to noise ratio.
Mono-Power Amp Design: The Infinity Reference 1300a is designed with specific features to power your subwoofers with a frequency range between 11-330 Hz. This amplifier is not designed to power a full-range speaker.
Class D Design: The Infinity Reference 1300a is equipped with a high-performance Class D switching power supply, which is more efficient than traditional class AB power supplies, and draws less current from your vehicle's charging system.
Protection Circuitry: The amp features 4-way protection, and will shut itself down in the following cases:
- DC Output: DC voltage is detected on the amplifier output
- Temperature: Amplifier is overheated
- Over/Under Voltage: Voltage at the +12V (Battery) terminal is less than 8.5V or more than 16V
- Short Circuit: Short circuit in speaker or speaker wire
Power and Protection LEDs: The amplifier features a Power and Protection LED on top of the unit. The Power LED illuminates Green when the amplifier is supplied power. The Protection LED will illuminate Red when the amplifier goes into protect-mode.
Input Level: Rotary control to match the level of the preamp input signal
Low Pass Filter: The 1300a has a variable 12dB per octave, 32-320Hz low pass filter to prevent unwanted high-frequencies from reaching your subwoofers so they can play deeper and louder.
Bass Boost: The Bass Boost control allows you to enhance the bass output of your system at 50Hz up to 6dB.
Optional Remote Level Control: The amp has an RJ-11 jack for use with the optional remote sub-level control module. The control module includes a 19.5' cable to connect the remote to the amplifier. This sub-level controller allows the subwoofer level to be adjusted from the listening position.
Preamp Output: 1 pair of gold-plated RCA jacks (amp provides a non-filtered signal for daisy-chaining additional amplifiers).
Preamp Input: 1 pair of gold-plated RCA jacks.
Remote Level Control: RJ-11 jack for use with the optional remote sub-level control.
IMS Input: This port is designed for future Infinity expansion products.
Speaker Output: 4 Set screw terminals for connecting speaker wires; handles up to 8 gauge (16 gauge minimum recommended).
Note: There are two sets of terminals to make it easier to connect multiple subwoofers. The terminals are connected internally in parallel.
- +12V: Set screw terminal for power wire from battery; handles up to 4 gauge wire (8 gauge minimum recommended)
- Remote: Set screw terminal for remote turn-on lead; handles up to 8 gauge wire (18 gauge minimum recommended)
- Ground: Set screw terminal for ground; handles up to 4 gauge wire (8 gauge minimum recommended)
Fuses: 3 Slots for 20A ATO fuses (installed)
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
1 question already asked
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy Mar 24, 2014 ] Staff