Skip Navigation

Infinity Reference 1600a

Mono subwoofer amplifier
600 watts RMS x 1 at 2 ohms

11 Reviews

Item # 108R1600A

This item is no longer available.

Shop all Car Amplifiers

Overview

Our take on the Infinity Reference 1600a

Infinity's Reference Series amplifiers offer impressive power and extensive controls for fine-tuning your sound — an ideal way to boost your music's intensity and clarity. Strict reliability testing results in durable, dependable amplifiers, and their compact size gives you more installation options in tight places.

Infinity's Reference Series amplifiers offer impressive power and extensive controls for fine-tuning your sound — an ideal way to boost your music's intensity and clarity. Strict reliability testing results in durable, dependable amplifiers, and their compact size gives you more installation options in tight places.

The Reference 1600a mono subwoofer amplifier ensures steady power delivery, thanks to its highly efficient, Class D design. This powerful amp will satisfy your inner bass head, delivering up to 600 watts RMS to your subwoofer system. And every Infinity Reference amplifier is certified to deliver power as advertised.

Adjust the amp's variable low-pass filter and bass boost to get more efficient output and cleaner low-end kick from your sub/enclosure combo. Preamp outputs simplify hookup to another amp in your system, so system building is quick and easy. Direct-connect terminals make reliable connections without any crimping or soldering.

Confused about impedance? Check out our article on matching subs and amps.

Very nice for the price

Customer, Charlotte Hall, MD

What's in the Box:

  • Mono amplifier
  • Three 25A ATO fuses (installed)
  • Instructions
  • Warranty/Product Registration card

Product Highlights:

  • mono subwoofer amplifier
  • 400 watts RMS x 1 at 4 ohms (600 watts RMS at 2 ohms)
  • CEA-2006 compliant
  • variable low-pass filter (32-320 Hz, 12 dB/octave)
  • variable bass boost (0-6 dB at 50 Hz)
  • Class-D amplifier design
  • MOSFET power supply
  • preamp-level inputs and outputs
  • fuse rating: 25A x 3
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 14-3/4"W x 2-3/4"H x 9"D
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Infinity Reference 1600a Reviews

Average Customer Review(s):

(11 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Product Research

Features
Controls
Connections

Features

CEA-2006 Compliant: CEA-2006 is a new system of testing and measurement methods for mobile audio amplifiers. This voluntary standard advocates a uniform method for determining an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4-ohm load, with 1% or less Total Harmonic Distortion (THD) plus noise, and at a frequency range of 20 Hz to 200 Hz, when applicable. Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4 ohms. CEA-2006 allows consumers to compare car amplifiers and receivers on an equal basis. The Infinity Reference 1600a under CEA-2006 regulations is rated at 400 Watts RMS x 1 channel with a 80dBA signal to noise ratio.

Mono-Power Amp Design: The Infinity Reference 1600a is designed with specific features to power your subwoofers with a frequency range between 11-330 Hz. This amplifier is not designed to power a full-range speaker.

Class D Design: The Infinity Reference 1600a is equipped with a high-performance Class D switching power supply, which is more efficient than traditional class AB power supplies, and draws less current from your vehicle's charging system.

Protection Circuitry: The amp features 4-way protection, and will shut itself down in the following cases:

  • DC Output: DC voltage is detected on the amplifier output
  • Temperature: Amplifier is overheated
  • Over/Under Voltage: Voltage at the +12V (Battery) terminal is less than 8.5V or more than 16V
  • Short Circuit: Short circuit in speaker or speaker wire

Power and Protection LEDs: The amplifier features a Power and Protection LED on top of the unit. The Power LED illuminates Green when the amplifier is supplied power. The Protection LED will illuminate Red when the amplifier goes into protect-mode.

Controls

Input Level: Rotary control to match the level of the preamp input signal.

Low Pass Filter: The 1600a has a variable 12dB per octave, 32-320Hz low pass filter to prevent unwanted high-frequencies from reaching your subwoofers so they can play deeper and louder.

Bass Boost: The Bass Boost control allows you to enhance the bass output of your system at 50Hz up to 6dB.

Connections

Preamp Output: 1 pair of gold-plated RCA jacks (amp provides a non-filtered signal for daisy-chaining additional amplifiers).

Preamp Input: 1 pair of gold-plated RCA jacks.

Remote Level Control: RJ-11 jack for use with the optional remote sub-level control (sold separately).

IMS Input: This port is designed for future Infinity expansion products.

Speaker Output: 4 Set screw terminals for connecting speaker wires; handles up to 8 gauge (16 gauge minimum recommended).

Note: There are two sets of terminals to make it easier to connect multiple subwoofers. The terminals are connected internally in parallel.

Power:

  • +12V: Set screw terminal for power wire from battery; handles up to 4 gauge wire (8 gauge minimum recommended)
  • Remote: Set screw terminal for remote turn-on lead; handles up to 8 gauge wire (18 gauge minimum recommended)
  • Ground: Set screw terminal for ground; handles up to 4 gauge wire (8 gauge minimum recommended)

Fuses: 3 Slots for 25A fuses (installed).

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Articles