Why Choose Crutchfield?
Great gear and expert advice
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
Deep discounts on car installation gear
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Trusted since 1974
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
60W x 4 Car Amplifier
Item # 110JXP680 | MFR # JXP680
This item is no longer available.
Our take on the Jensen JXP680 by Crutchfield's Charlie Pastorfield
Jensen's JXP Series amplifiers deliver over-the-top power and killer looks without breaking the bank. Top-mount controls give you easy access to the high- and low-pass variable crossovers, input gain adjustment, and a built-in bass boost (adjustable 0-12 dB at 45 Hz).
The aggressively-styled exterior with its blue illuminated Jensen logo will get your installation stylin'. Preamp- and speaker-level inputs allow you to connect the amp to any system, even a factory radio. If you're planning to expand your system later, preamp (pass-through) outputs on JXP Series amps make it easier to hook up a second amplifier.
The JXP680 amplifier powers your full-range speaker system with 60 watts RMS by four channels. In bridged mode, this jammin' Jensen weighs in at 170 watts x 2 enough to make two 4-ohm subwoofers very happy.Details:
- 2-, 3-, or 4-channel output
- Tri-Way output
- 60 watts RMS x 4 at 4 ohms
- 85 watts RMS x 4 at 2 ohms
- 170 watts RMS x 2 in bridged mode
- top-mounted controls
- aluminum heatsink
- blue illuminated Jensen logo
- requires 8-gauge power and ground leads wiring and hardware not included with amplifier
- preamp- and speaker-level inputs
- high- and low-pass crossovers, variable from 40-400 Hz, 12 dB/octave
- 0-12 dB bass boost at 45 Hz
- preamp outputs
- MOSFET power supplies
- speaker short, thermal overload, and DC offset protection
- 10-11/16"W x 2-3/4"H x 11-3/16"D
- 1-year warranty
What's in the Box:
- Blue amplifier with chrome and silver trim with two 25-Amp fuses in chassis
- 4 Self-tapping screws
- 4 Lock washers
- 4 Flat washers
- 1 Spare 25-Amp fuse
- 1 Allen head bolt
- 1 Allen wrench
- 2 Speaker level input harnesses with Molex plug and 8" wires
- Manual (English/Spanish/French)
- Product registration/Survey card
Features and Specs
|RMS Power Output (Watts x Channels)||
60 x 4
|Peak Power Output (Watts x Channels)||340 x 2|
|Power at 2 Ohms (Watts x Channels)||85 x 4|
|Bridged Power (Watts x Channels)||170 x 2|
|Minimum Impedance Bridged||4|
|Minimum Impedance Unbridged||2|
|Best Frequency Response||20-20kHz Hz|
|THD at Rated RMS Power||0.5%|
|Signal to Noise Ratio||100 dB|
|Low-Pass Crossover Frequency||40-400 Hz|
|Low-Pass Slope (dB/octave)||12 dB|
|High-Pass Crossover Frequency||40-400 Hz|
|High-Pass Slope (dB/octave)||12 dB|
|Bass Boost||0-12 dB|
|Bass Boost Frequency||45 Hz|
|Fuse Rating||25 x 2|
|Speaker Level Inputs||Harness|
|Preamp Outputs||2 pair|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Protection Circuits: The amp automatically turns off in the event of speaker short circuit, low impedance, over heating, or DC offset. The circuit resets when the problem is corrected.
Power LED: The power LED is dual status, green when operating properly and red when any protection circuit is engaged.
Power Supply: A MOSFET power supply is used for cooler and more stable operation.
Heat Sink: This amplifier uses an extruded aluminum heat sink for efficient cooling.
Top Mounted Controls: The gain, crossover, and bass boost controls are on the top of the amp for easy access. They are covered by a removable translucent blue panel.
Crossover: High pass and low pass crossovers are built into the amp, they can both be bypassed for full range operation. The crossover points are continuously variable from 40 to 400 Hz and the crossover points are independently adjustable for all four channels.
RCA Output: The RCA inputs are passed through to two pair of RCA outputs without being crossed over.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.