Skip Navigation

Kenwood Marine Bass Package

Includes KFC-W250MRW 10" marine subwoofer and KAC-210MR amplifier (White KFC-W250MRW subwoofer)

23 Reviews | 5 questions - 7 answers

Item # 113PWD250M

In Stock

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Overview

Our take on the Kenwood Marine Bass Package

This Kenwood P-WD250MRW marine bass package includes a water-resistant 10" subwoofer and a compact power amplifier. It's a combo that's sure to shape up the bass in your boat.

Bring better bass to your boat

This Kenwood P-WD250MRW marine bass package includes a water-resistant 10" subwoofer and a compact power amplifier. It's a combo that's sure to shape up the bass in your boat.

Kenwood's KFC-W250MRW 10" marine subwoofer combines a strong, waterproof polypropylene cone with a rubber surround that'll hold up to humidity and UV exposure. A tough white plastic shell protects the basket and magnet against corrosion, and the sub's integrated white plastic grille matches the interior of many boats. The sub's dual-voice coil design ensures you'll get maximum power out of the amp.

Kenwood designed this marine subwoofer for free-air use, so it'll produce great bass when mounted into a panel or bulkhead — no box required. Stainless steel mounting hardware is included.

The KAC-210MR marine amplifier packs plenty of power into a small package, thanks to Kenwood's engineering expertise. Special coated circuit boards ensure the amp will keep the power flowing even after prolonged exposure to dampness. The amp's output is tailored to work perfectly with the subwoofer.

Installed on a Aquasport 222. Running a fusion reciever with 4 kenwood speakers that needed a boost. Sounds great!

Phil, Bradenton, FL

What's in the Box:

  • The Main box contains two smaller boxes (Subwoofer box/Amplifier box):
  •  The Subwoofer box contains:
  • 10" Marine subwoofer
  • White grille (attached)
  • 6 Stainless steel self-tapping screws
  • 6 Stainless steel speed clips
  • Instruction Manual (Eng/ Fren/ Span)
  • Template
  • The Amplifier box contains:
  • KAC-210MR Power amplifier
  • 15" Connector cord (has two in-line 5A fuses)
  • 15" Speaker cord
  • 2 Metal mounting brackets
  • 4 Self-tapping screws
  • 4 Machine screws (each screw has one flat washer and one lock washer)
  • Instruction Manual (Eng/ Fren/ Span)
  • Warranty Card

Product Highlights:

  • package includes KFC-W250MRW marine subwoofer and KAC-210MR amplifier
KAC-210MR mono amplifier
  • 200 watts maximum power output
  • 80 Hz low-pass filter (12 dB/octave)
  • 15" power harness and 15" speaker wiring harness included (harnesses use special plugs — if extra wire length is needed, it must be spliced to the harnesses)
  • 7-11/16"W x 1-3/16"H x 6-1/8"D
  • warranty: 1 year
KFC-W250MRW 10" marine subwoofer
  • dual 1.5-ohm voice coils
  • pearl mica polypropylene woofer with rubber surround
  • power handling: 50-200 watts RMS
  • sensitivity: 91 dB
  • top-mount depth: 5-5/16"
  • designed for free-air use
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Kenwood Marine Bass Package Reviews

Average Customer Review(s):

(23 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Product Research

Subwoofer Features
Amp Features
Inputs and Outputs
Specifications

Subwoofer Features

Overview: This package includes a KFC-W250MRW dual voice coil marine subwoofer and a KAC-210MR mono amplifier designed for use with the subwoofer.

UV and Water Resistant: The subwoofer features a UV-resistant white grille, waterproof pearl mica polypropylene cone, rubber surround, and stainless steel mounting hardware. The tinsel leads are coated and the speaker terminals are gold-plated to guard against corrosion. The amplifier has a special coated circuit board to protect it against the marine environment.

Free-Air Subwoofer Design: The woofer is designed for mounting in an infinite baffle (free-air) application, so no enclosure is necessary.

Vented Voice Coil: The subwoofer's vented voice coil allows air to circulate in the voice coil gap, helping dissipate heat, resulting in greater power handling and increased reliability.

Subwoofer Mounting: The measurements in the Crutchfield database are taken without the grille. With the grille installed, the mounting height increases to 0.983" and the frame diameter increases to 10.766".

Amp Features

Matching Amplifier: The KAC-210MR mono amplifier is a special amplifier designed to handle the low impedance load of the subwoofer. The subwoofer has dual 1.5-ohm voice coils, and when connected in parallel to the amplifier, present a 0.75-ohm load to the amp.

Fixed Input Sensitivity: The amp has a fixed input sensitivity of 60mV (0.06 volts). There is no gain control on the amplifier.

Note: In order to control the volume of the subwoofer relative to the rest of the system, you will need a head unit with a variable volume control on the subwoofer preamp output, or an external remote level control (such as 136CLRLC).

Low-pass Filter: The amplifier has a low-pass filter with a fixed cutoff frequency of 80Hz.

Inputs and Outputs

Amp Unit:

  • Power: 10-pin jack for use with the supplied Connector cord
  • Subwoofer Output: 4-pin jack for use with the supplied Speaker cord
  • Line In: Stereo RCA audio jacks

Specifications

Amp Unit:

  • Maximum Output: 200 watts
  • Signal-to-Noise Ratio: 85 dB
  • Low-pass Filter Frequency: 80 Hz
  • Sensitivity/Input Impedance: 60mV / 10 kΩ
  • Output Impedance: 1.5 Ω + 1.5 Ω = 0.75 Ω

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Great reviews [ RANDY D  May 22, 2016 ]

5 questions already asked

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer, or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/. [ Krissy  May 12, 2017 ]  Staff
iF YOU PLACE THIS SPEAKER "INSIDE" A COMPARTMENT, YOU WILL LOSE A LOT OF PUNCH. BUT YOU CAN DEFINATELY DO IT.. [ Michael  Jun 29, 2016 ]
It is a free-air sub so you don't need hardly any space just make sure the magnet is not touching the boat in the back and you will be fine. [ Mark  May 05, 2016 ]
I will say not much. I have mine installed in the bottom of my port side bench. Its also a storage compartment crammed with stuff so not much breathing room back there . It sounds really good. Im pleased. Its installed on a searay 240 sundeck. [ Michael  May 05, 2016 ]
I Have about 12 inches and it sounds good. [ CHRIS  May 04, 2016 ]
You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss the best option for wiring. They will be able to pull up your gear and see how this will best integrate. [ Jeff  Apr 21, 2014 ]  Staff
Articles

Searches related to the Kenwood Marine Bass Package Includes KFC-W250MRW 10" marine subwoofer and KAC-210MR amplifier