Heat Transfer System: The dual ventilation system design helps
keep the motor structure cool, improving power handling and longevity.
Long Stroke Design: The pole piece has been extended to provide
a more linear magnetic field for woofer operation. This lowers distortion and provides
the woofer with better low frequency response.
Double Stacked Magnet: The stacked magnet assembly is used to
create a powerful linear motor with increased excursion capability for superior
Spring Terminals: The spring post terminals on one side of the
woofer connect to your amplifier's wiring. The posts will accept pin connectors,
single banana plugs, or bare wire up to 8 gauge.
Trim Ring: The included cosmetic trim ring adds to the speaker's
mounting height when top mounted. The mounting height (and flange height) becomes
Sealed Box: Kenwood recommends a sealed enclosure with an
optimum internal volume of 1.25 cubic feet (from 0.75 to 1.75 cubic feet is
acceptable). Sealed enclosures provide the most control over a woofer, will
handle a lot of power, and provide accurate sonic reproduction, making them
suitable to all types of music.
Ported Box: Kenwood recommends a ported enclosure with an
internal volume of 2.0 cubic feet (from 1.5 to 2.5 cubic feet is acceptable)
using an 13-3/4" x 1-1/2" x 21-1/2" slot port. Ported (or vented)
enclosures typically provide better overall efficiency than sealed so they are
suitable for use with smaller amplifiers, giving you more bass output from less
power. However, this efficiency comes at the expense of very low frequency output.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.