Metra 71-025C Speaker Wiring Harnesses
1998 Toyota RAV4
Crutchfield Customer Review (What's this?)
Good easy fit on a 1998 Toyota Rav4!
Pros: quick and easy
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item # 12071025 | MFR # 71-025C
These harnesses allow you to plug your new speakers into the factory connectors present in your vehicle's speaker openings.
Note: Some aftermarket speakers have terminals that are wider than this harness's slide-on connectors. You may need to widen the harness's female slide-on connectors, or use the slide terminals that may be included with the speakers. If you need to connect your new speaker's connectors to the Crutchfield harness, soldering is best, and crimping is also very popular - see "Accessories."
Includes Crutchfield's 60-Day Total Satisfaction Guarantee
Note: Most vehicles will require additional installation parts please identify your vehicle if you haven’t done so. You can also call an Advisor for more information.
Average Customer Review(s):
Good easy fit on a 1998 Toyota Rav4!
Pros: quick and easy
These cables totally work. The tabs fit great and behaved completely as expected, my *slight* problem with it is that the fit of the ports were very tight, such that I couldn't get it on the contacts without bending the casing and honestly didn't get them on as cleanly as I would have liked. In a perfect world these would be a little looser and then have a method for squishing the contacts (think like an ethernet cable or some kind of crimping).
Cons: Design was fine but not great
Very helpful and time saver.
Perfect fit for my MR2. Made connecting the new door speakers a snap.
Pros: Makes connections a snap
Very helpful - no need to break out the soldering pencil.
Pros: makes it a plug and play application
Exactly as described. No cutting, no soldering or no hassles. Would definitely buy again.
Pros: Worked exactly as described.
Worked great on my Toyota.
Pros: Fit great.
Worked perfectly and saved me the time of splicing into the OEM wiring.
Exactly what you need to hook up your speaker to 1999 Toyota Solara
They work perfectly. Both ends fit just fine. Note that if you're using them in a 2nd gen MR2 with the premium sound, you may end up not using them. On my install the head unit did not play nicely with the stock amps, so I ended up rewiring everything including running new wire to the door speakers, which then eliminates the connector in the door, therefore eliminating the need for these adapters. But that's not a negative reflection on the connectors, it's just that as with everything else on the MR2, audio is a pain in the butt. ;)
Fits like the original!
Pros: Extremely easy to install.
Perfect! They matched right up with the Toyota connectors.
Pros: Good fit: The connectors all match, and the wire length was just right.
made installation easy
Pros: very nice to include with the speakers
Perfect fit on my Toyota!
I ordered two of these for my 1993 Toyota Tercel. I was installing (2) Rockford Fosgate P16's and (2) Rockford Fosgate P142's. 1. They fit into the front door stock harnesses easy. 2. The prongs were too small to fit on the negative and positive terminals to either speakers. ^^ Had to snip these off and add our own. 3. The rear speakers, didn't even have the right harness. ^^ We had to remove the stock harness from the stock speaker, and put it on the already changed aftermarket harness.
Pros: Fit the front door speakers Had wires we could use
Cons: Did not fit terminals Doesn't fit rear dash speakers
Made an annoying job into child's play.
Crutchfields harnesses and install kits make installation a breeze.
Speaker Harness: These speaker harnesses prevent you from having to cut your vehicle's factory speaker plugs when replacing your factory speakers with aftermarket car speakers. The speaker harness features two female quick-slide connectors on one end to attach directly to your new aftermarket car speakers & a proprietary Molex connector on the other end that connects to your vehicle's factory speaker plug.
Quick-Slide Connectors: The speaker harness is equipped with a large (positive) & small (negative) female quick-slide terminal. These quick-slide terminals fit directly onto most aftermarket car stereo speaker terminals (slight crimping may be required). In rare cases that the quick-slide terminals do not fit your car speaker terminals, you will need to solder the speaker harness to your aftermarket speaker's terminals or replace the quick-slide connectors on the speaker harness with the correct size terminal.
Note: Installation tools, hardware, & accessories are not included & sold separately. Please see the Accessories tab for recommendations & availability.
Quick-Slide Terminal Measurements: The positive female quick-slide terminal measures 0.205" (inner width), while the negative female quick-slide terminal measures 0.115" (inner width).
Wire Code Chart: Two identical speaker harnesses are included.
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Ease in istallation[ Gary May 02, 2017 ]
The harness makes it much easier to securely connect the speakers.[ MIGUEL Nov 30, 2016 ]
makes speaker connections simple[ Geoffrey Oct 16, 2016 ]
This was recommended, and free, by Crutchfield.[ Daniel Aug 07, 2016 ]
came free!!![ Anthony Jun 02, 2016 ]
To connect speakers to the stock harness[ James Stephen May 11, 2016 ]
I did not choose the speaker wire harness, they were matched and free with my order! Crutchfeild rocks![ Larry Ken Apr 17, 2016 ]