Skip Navigation

Toyota Speaker Mounting Brackets

Fits select 1990-95 Toyota 4Runner models (for 5-1/4" or 6-1/2" speakers)

3 Reviews

Find what fits your vehicle

Can't find your exact vehicle?

Item # 120828144

This item is no longer available.

Shop all Speaker Mounting Brackets


These brackets allow you to install select 5-1/4" or 6-1/2" speakers in your factory speaker openings.

These brackets allow you to install select 5-1/4" or 6-1/2" speakers in your factory speaker openings.

Important Note: Some 6-1/2" speakers use a larger frame and require a larger cutout. We call these 6-3/4" speakers, and they won't fit in this bracket. This bracket will only work with speakers that require a cutout diameter of 5-1/8" or less.

  • Priced per pair

Includes Crutchfield's 60-Day Total Satisfaction Guarantee

What's in the Box:

  • Two speaker adapter brackets
  • Four M6x16mm Machine screws
  • Two 3/4" Self-tapping screws
  • 2 Speed clips
  • Instructions

Toyota Speaker Mounting Brackets Reviews

Average Customer Review(s):

(3 Reviews)


Gene from Guam on 5/10/2013

1992 Toyota 4Runner
Crutchfield Customer Review (What's this?)

It could have been better if the plastic is a little bit firmer, it's a bit soft, I screwed it to all four corners and still shaking.

Pros: came free

Cons: very soft plastic material

Toyota Speaker Mounting Brackets

Houghton from Santa Fe NM on 3/6/2011

1995 Toyota 4Runner
Crutchfield Customer Review (What's this?)

These will not fit he 4runner rear speaker locations. Even with exstensive modification they are a mess. Cheaply made and too thin for any real speaker support and after speaking with Crutchfield support no other options available. I have been installing my own stereo equipment for 20 years and thankfully have never run in to anything of this poor quality. Gave them one star as there is no lower option.



not recommended- flimsy

Jason from MS on 11/3/2008

Crutchfield Customer Review (What's this?)

To use these brackets in my 95 4Runner, the 2 factory speaker boxes (1 each behind each rear side panel) had to be removed, which was no small feat. The factory box has little clearance around it, so removing it required lots of brute force. Though the bracket does bolt up using the factory holes (note the 2 stars I gave it), the bracket is flimsy, with the 6 3/4 Boston speakers I bolted in feeling as though they were bolted to a thick sheet of paper, flexing back and forth. Also, removing the factory box and the factory 2 ohm speaker and replacing with a 4 ohm 6 3/4 speaker on this bracket left me with less sound (overall quality, bass, and volume) than the ancient factory speakers. A 2 ohm 6 3/4 speaker may have improved this situation somewhat, but I recommend not using these brackets. Instead, replace the factory 4 inch speaker with a quality 2 ohm 4 inch speaker. It bolts right into the factory box, involves less work and sounds much better than the 6 3/4 speakers using this bracket. Crutchfield's service was top notch, as usual, and they accepted the returns with no problem.




Hands-on research

Product Research


6-1/2 Speakers: 6-1/2 speakers with the 3-hole bolt pattern or the symmetrical 4-hole bolt pattern can be mounted using the tabs around the inner speaker opening of this bracket (if the hole spacing matches).

5-1/4 Speakers: The frame diameter of a some 5-1/4s is smaller than the brackets' cutout; in these cases a speaker baffle should be used to seal the rear of the speaker.


  • Cutout Diameter: 5.089"
  • Height: 0.09"
  • Three-Hole Spacing (6-1/2): 4.56"-4.89"
  • Four-Hole Spacing (5-1/4):
    • Perimeter: 3.72"-4"
    • Diagonal: 5.25"-5.685"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.