Crutchfield Customer Review (What's this?)
Fit well looks great
Pros: Price value
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item # 120956511 | MFR # 95-6511
This Metra 95-6511 kit allows you to install a double-DIN (4" tall) radio in your vehicle's dash opening. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this kit is compatible with your vehicle. Warranty: 60 days
Note: Most vehicles will require additional installation parts please identify your vehicle if you haven’t done so. You can also call an Advisor for more information.
Average Customer Review(s):
Fit well looks great
Pros: Price value
Have to modify dash a bit for dbl din ...which is a scary proposition..but it says this in description
Pros: Fits dash well after modification
Cons: U have too modify dash...cut away 8 inches of dash cross member
Helped give my new Pioneer AVH-4200NEX a nice look in my 2007 Jeep Wrangler. It would be nice if the brackets had some metal and were not all plastic, but that is a minor complaint.
It fits... sort of. This was purchased for my 2015 Jeep Wrangler Unlimited Rubicon for a Sony AX100 unit. The fitment was poor and required a fair amount of trimming to get into the dash opening. The overall result is fair, but really can't improve it with this product Soft plastic scratches if you look at it wrong Had to cut away edge touching head unit so it would fit, width-wise into dash opening Had to cut additional mounting holes as leading edge of driver-side rubbed against head unit volume knob, so needed to make new mounting holes to push the head unit further into the cabin, clearing the install kit edge
Fit perfect and looks like factory install
Pros: Worked perfect
perfect fit for my installation in 2009 jeep wrangler unlimited x --
Great fit. Made for an easy install.
Excellent perfect fit, for my 14 Chrysler 200 good quality
I am only giving these brackets a 3 star rating is because I wanted my radio to be flush with the dash and not set back a half inch. So I had to use a dremel tool to notch out the bracket and and use a drill bit to make slot just a tad longer. Since the brackets were made of plastic, it was easily adapted to fit my needs. Got this idea from a you-tube video I found. Used to install a Pioneer radio in a 2013 Dodge Caravan
Crutchfield always has different product under the song and I can always count on them for what I need. Thank you very much.
Pros: What I like best deals the fact that whenever I need something regarding my automobile electronics Crutchfield has everything there for me.
Cons: What I like best deals the fact that whenever I need something regarding my automobile electronics Crutchfield has everything there for me. I don't believe I can think of any it all work so well.
Works ok. I have to modify the dash kit with a Dremel tool with a small cutoff wheel so it would fit the Pioneer AVH-X391BHS.
Pros: Looks nice.
Cons: Had to be modified to fit properly.
worked with a little modification. Screws are a little short for Alpine CDE-W265BT. Seemed to set the radio a little lower that I liked
Pros: easy to use
Cons: screws a little short
Looks stock to the car. Awesome
Fits correctly. It seems a bit flimsy at first, but once you bolt everything down and get it in everything is solid. I do wish they didn't limit install depth by leaving a tab that limits how far back you can bolt it onto the receiver.
Cons: Receiver depth limited
It fit my 2008 Jeep Wrangler perfectly. Would highly recommend Crutchfield any day of the week
Excellent work perfectly
Had to elongate a couple of holes so that the radio would sit flush
Makes my JVC receiver look like a factory install.
just what i needed
Needed for install, but this is another product with nearly nonexistent instructions. Online videos helped me out. The beveled edges on the face go on the outside. Still unsure where the screws were supposed to go, so put them where I deemed best.
Pros: Fills the gap, as required
Cons: Instructions would be useful for placement
This dash kit allowed me to install my Pioneer 7200 seamlessly into my 2012 JK Jeep. It is clean looking and fit with no problems. I am pleased with the ease of the install and the look in my Jeep.
Pros: Clean look. Easy to use.
The brackets that came with this kit did not work right for my car. I kept thinking I must have it positioned wrong, but the centering pins on the brackets dictated the placement. I ended up using a dremmel tool to get it to fit better. As for the booklet they send for dash disassembly? --- It is a waist of a tree !
Fit was not what I expected it to be. Had to make adjustments
Pros: Only double din kit available on this site.
Cons: Fitment was not what I expected!
2009 Dodge Caravan. Not quite a perfect fit, but did the job.
This kit keep it very clean looking after installing new navigation head unit. Easy to install and looks amazing.
Fits nice and looks good
Fits perfect. Just don't use with unit that has knob on side. Push buttons are fine but knob is close to edge of plate.
I was somewhat disappointed in how the final install looked in a 2015 Jeep wrangler. This leaves a gap on the bottom of the head unit and the trim panel. Soon as another type is available, I'll be swapping it out. Technically it does what it is suppose to do. Aesthetically it fails.
Pros: Easy to install
Cons: Looks terrible in this as application
Does not fit a 2017 Wrangler Unlimited. The plasic on this vehicle is just different enough to make a clean mount impossible. I had to modify the mount by notching the plastic. Currently, it works but it is not at all good looking or a stable fit. If you're not in a hurry, wait for a proper mount to be developed.
Cons: Everything else.
Works great in my 2011 keep liberty. Only flaw is there were no mounting screws included.
Worked to fit my Alpine ILX-007 in my Jeep Wrangler.
Wow! I'm impressed. I've done a lot of aftermarket stereo installs over the years, and this is the best looking, best fitting, most trouble free dash kit I've ever used. The dash opening in my car fit the double DIN height of the new Pioneer head unit perfectly, but is wider than the Pioneer unit. The Metra kit provides two side fillers that screw to the sides of the head unit and have flanges to screw the head unit to the dash. When I re-fitted the plastic dash-surround panel over the new head unit, the adapted face fit the panel opening PERFECTLY with no fiddling and no gaps. The Metra side-pieces are vertically convex, adding a nice aesthetic touch to the appearance of the installed unit.
Pros: High quality, excellent product design, perfect fit.
Cons: Absolutely none!
This dash kit worked great! However it did require a lot of trimming to fit properly. I installed in a 2012 RAM 1500. The trimming was fairly easy and in the end looks great.
Pros: Clean look Price
Cons: Lots of trimming needed
Love it, make the radio very steady and neat plus it fit perfectly on my vehicle
these are curved to match dashboard but don't transition to the flat stereo face so i trimmed the plastic to reach a happy medium but can still see a gap i would purchase this item seperately from different maker because this is the only one Crutchfield carries
Pros: must have some sort of adapter
Cons: piece of cheap plastic with a large gap married to my expensive stereo
Worked as descrobed and easy to install.
Stereo fits and install is easy but when tightening the screws the brackets try and twist. I trimmed plastic to allow me to move stereo further forward after initial install. I wanted the stereo to sit flush with dash.
Didn't meet expectations! I used it for Pioneer 4200-NEX in Dodge Grand Caravan. First of all its cheap bendy plastic. Not a good way to be a tide fit! Overall really bad design! Looks ok, but you have to hustle to make it work! Has gaps between the car stereo trim and the radio unit.
Cons:Crutchfield response on October 26, 2016 If you encounter a problem with anything you purchase from Crutchfield, please contact our tech support team right away. They can help you solve the problem and get the kit installed correctly! Lifetime tech support comes with every Crutchfield purchase.
Easy installation fit my radio system like a glove. Installation was a breeze.
Pros: Easy to install, by the whole kit for the vehicle at once.
Not very sturdy, when I reinstalled my bezel I had to squeeze the dash kit together to get the bezel past it. I would gladly pay twice as much for a better quality kit but are there any?
Pros: It holds the radio in the dash and fills in the gaps on the sides of the radio.
Cons: It's not good quality and the fit & finish it not very good. I gave it 3 stars because it does hold the radio in, it just doesn't match the quality of the rest of the truck.
Made my radio look like a factory install.
Pros: Ease of installation.
Nice, but needed to customize it to fit the 2008 Jeep Liberty.
The product worked fine, but the instructions as to which screws to use and which bracket went to which side of the unit were not included!!!
Pros: fit well
Cons: instructions not helpful
Installation was easy. Hold the bracket against the head unit and screw in 3 screws. No alignment issues when installing in vehicle. With previous installation hardware I've had issue with alignment. Hardest part of install was removing the old unit.
Perfect fit my kenwood looks nice,no holes looks like a big stock radio
Pros: Easy to install
Would not let the trim fit properly. Either fit at top and pulled the bottom up or fit at bottom and hit at the top. Tried everything and way, but could not get it snug.
Cons: bad fitCrutchfield response on May 3, 2016 We forwarded this review to our Technical Support team for follow-up. Lifetime tech support comes with every Crutchfield purchase.
fulfilled the need but it would have been better and more rugged if it were made out of aluminium. I know the price would have been much higher but I would be willing to pay more for the option of something more substantial.
Pros: fit and fulfilled the need. clean installation.
Cons: feels slightly cheap.
Perfect fit into 2016 Wrangler- rounded sides on the kit make it look like a stock radio.
Pros: Perfect fit.
The dash kit fills the gaps when installing an aftermarket head unit. Most are not as wide as the stock unit, so the space fillers are needed. The U cut out used to mount the new stereo in the dash lines up perfectly and the gaps are closed off with a nice appearance. Be careful when bolting in the stereo to the dash - you're bolting plastic to plastic and it's best to use a hand tool to do this. Using a drill could cause over torque and damage the dash mounting holes. Jeep kind of went cheap on us there. Overall, the kit makes a nice snug fit and it works well.
Pros: Great fit and great look
Cons: No screws included to mount the kit to the sides of the new stereo you're installing
Does not fit flush with the Pioneer AVH-X2700BS stereo. Has gaps on sides.
Looks almost like its an OEM mount
Pros: Easy to use
Crutchfield did a great job in recommending an upgrade for my 2007 Wrangler. The one weakness that I found though was the dash kit that came with my head unit. While it filled the hole width in the dash there are tow large openings to each side of the unit. Perhaps this is for better ventilation since the unit fits tightly in the dash but it is noticeable and not ideal visually.
Pros: Conforms the head unit to the dash opening well.
Cons: Leaves holes between the front of the side panel and the front of the head unit.
Had to tweak a little bit but fits good
Pros: Easy install
This products great for its price! It's exactly what you'd expect. It was simple to install and easy to learn how to use. BlueTooth works awesome and the screen looks great in the car. Really upgrades you're dash and vehicles interior look. Great choice.. And u must mention.. I paid an extra for next day shipping.. And I had the product in my hand the very next morning by 9:30am!
Pros: Great touch screen.. And sound!!
Cons: No complaints or cons
perfect fit for new install
Pros: easy fit
This was used for a 2009 Dodge Journey to install a Pioneer App 4 radio. It did complete the job to fit, but its not very tight. The factory radio had side clips to ensure that it was locked in and this kit does not have them. With it being a low price and it fit my car I made the purchase, but should have done more research and paid a little extra for one to ensure that it was an exact fit.
Pros: The price. Should fit most vehicles. Easy to use
Cons: Was not an exact fit.
Pros: ease of install
It works, and I'm not sure anyone else makes a kit for Wranglers. Once it's all installed, it doesn't really fit that well. Gaps around the edges, etc.
Pros: it works
Cons: it's ugly
This item works as it should and attached easily to the radio and to my vehicle. Looks good (matches dash) after final install.
Pros: Looks good.
Good fit. Used in two setups this month (two Jeeps) and works great.
Easy to put on. Is not a perfect fit for 2010 Dodge Challenger.
These worked well with my 2015 Jeep Wrangler, but did not fit quite as nicely as some of the other dash kits I've used over the years. With MOPAR using a non-standard sized opening I find there's a slight gap above and below my Pioneer AVIC-8100NEX. Since this is designed to work with a variety of different head units some gaps are to be expected, I just wish there would have been a trim ring option to make it flow better.
fit like it should
Worked perfect for mounting 2 din Clarion.
Cons: Need to trim entire top 1/8" of factor dash to squeeze 2-din in. I melted mine with a soldering iron. Not any problem with this kit specifically.
Worked good, plastic holes could be better but it doesn't rattle or move.
Pros: Easy to install
Cons: Could be stronger
these do not fit the radio without modifying them. I had to cut the upper and lower inside corners on each one to get them to fit the radio and have the radio even with the front of the dash I also had to modify the holes in the brackets since when moving them back to make thee radio flush there are no holes to use thus I had to hack saw one of the holes to make the slot longer so it would line up with the radio holes once in the dash they do look ok however
Pros: look good when in stalled
Cons: had to modiifly the brackets to make them work with the radio I had
So this fit the dash perfect and looks great but with my pioneer avh x3700bhs reciver it forces the reciver to sit back too far leaving a visable gap all the way around the reciver and the dash. If I had a reciver with a removable face then I think it would be perfect but since mine doesn't it leaves a gap. Very easy to install though
Pros: Fits dash and easy install
Cons: Doesn't fit the reciver depthCrutchfield response on October 20, 2015 We forwarded this review to our Technical Support team for follow-up. Lifetime tech support comes with every Crutchfield purchase.
fit perfect but mounting screws were to short
Pros: good fit
Cons: screws too short
Like others, seems a bit flimsy, why does it not come with appropriate screws? (Or Crutchfield provide the appropriate screws for the specific radio....). But fit is excellent & it does the job.
Cons: Plastic seems flimsy- screws not provided. (Again- why does Crutchfield not include appropriate screws in the installation package?)
Not quite how to score this. I'd say I am neutral, but that isn't an option. It appears to be made well. The holes in the side allow lots of flexibility for attaching it to the aftermarket head unit. I have seen some pics of very clean installs with these parts, but my results were different. I don't blame the adapters because they are meant to be universal. When mounting my Pioneer AVH-X3700BHS head unit in my 2011 Wrangler the head unit is set back about an 1/8" from being flush with the dash. The adapters have a lip on them that is butting against a step in the side/face of the radio so I can't really pull the unit any further forward without some modifications. I think they are designed to work with a unit where the face extends a little further from the metal enclosure of the head unit.
Pros: Price and versatility
Cons: May not be the best fit for your head unit and vehicle
It works.. Someone else mentioned difficult to tell which side is which.. TRUE.. Had to pull the deck back out of the dash as I was putting it all together and swap sides.. Also leaves the deck sitting about 1/8" to deep into the dash and leaves an open gap between the head unit and the mounting plates..
Fit was great in my 2015 Jeep Wrangler
Pros: Fit great with my pioneer 3200bt
Cons: No screws were included to attach to the deck
Used this to install a JVC double-din unit in my 2015 Jeep Wrangler.
Pros: Everything fit, no issues.
Cons: Seems a little flimsy, but no issues.
Mounted up to my Jensen VX 4025 Head unit with no issue, and left a clean look in my 2013 Avenger
Pros: easy install
Fits nicely and somewhat seemlessly.
The brackets are made of plastic and they seem flimsy. They were easy to install but I worry that they will break with time.
Pros: Easy to install. Fit.
Cons: Flimsy plastic. Could break.
Worked as intended
Looks great and it makes it looks factory.
nice item, made installation easy professional looking installation.
Pros: easy installation nice fit.
Cons: . none
This product made the correct fit in my Wrangler but it didn't have good instructions and I couldn't determine what one went on the left and the right
Pros: Correct fitment for my jeep
Cons: Poor instructions for install Flimsy
It fits perfectly! I wish it was metal or much durable plastic!
Pros: Color matched the dash and fits perfectly.
Cons: Cheap plastic!
Fits well. Looks like a poor fit with gaps between the plastic and the radio until you put the dash trim on. Then it closes the gaps and looks very clean.
Pros: professional look when complete.
Easy to use looks good
Pros: Easy to use
Used for a Pioneer head unit in a 12 RAM 1500. Product does as it states and completed the install nicely. Provided with plenty of hardware. Depending on the head unit lining up several screws may be a bit difficult. I would have liked to have seen the holes countersunk so that when attaching the kit it simply holds and does not crush the plastic.
Pros: Completes installation, looks clean
Cons: Not the strongest plastic, but good for what it is
I really dislike this adapter... Would like to have seen some implementation of usb or audio in port. And the plastic doesn't just feel cheap it looks cheap. Would like to have seen metal used.
Pros: fits radio well
Cons: doesn't look or feel like quality material, gaps by radio
Did not fit my 2012 dodge ram very well. had to make LOTS of modifications.
Pros: sorta fit
Cons: plastic, would be better mas out of metal.
Installed in my Jeep Wrangler. Great product did what it was suppose to.
Cons: Did not come with hardware so I had to purchase my own. But it cost very little so no big deal.
Fits perfectly, but is not made with the best material. I used a phillips screwdriver and the screw broke plastic; however, looks great with the double din in my challenger.
Pros: Fits flush
Cons: Mediocre plastic
Works fine, no issues.
The stereo I installed looks great and this dash kit was the icing on the cake. Looks like a factory install
It's ok but it could be better
Pros: I just don't like how it look in my car
Cons: I think it's To flimsy
Simple product, makes aftermarket install (Pioneer AVH-2600 into 2014 Dodge Challenger) look OEM
Makes mounting a breeze!
Pros: Simple to use
Haven't use this yet but looks to be a good product. I bought it in order to mount a cb and stereo in the dash of my 2010 JKU.
Instructions says to use screws that came with stereo to mount brackets to stereo. The plastic is too thick that the screws are too short. This install come with no screws.
Pros: easy to understand
Cons: need thinner side plastic so hardware from stereo will work.
This came with the radio and it fit the 2010 perfect
Pros: Worked and come with all parts and screws needed
Cheaply made. Fits fine.
Pros: Fits Fine
Cons: Cheaply made
Makes my aftermarket radio look like the stock radio
Pros: Looks great, fits perfect
This is the first DDIN kit I have used. Overall, it works great. It blends well with my dash. The only minor issue I had, was the plastic is somewhat thick on the sides, and the mounting screws provided with my HU weren't long enough to catch. Luckily, I had some slightly longer screws on hand.
Pros: Blends well with dash
2014 Jeep Patriot 4x4. Flimsy at best. They have holes for every conceivable radio configuration so getting it installed is a snap. The problem is that the first pothole you encounter will cause the mounting bracket to fail. I noticed immediately after installation that the dual din unit was starting to sag. 2 days later I hit a pothole and the unit collapsed into the space behind the dash. Crutchfield was nice enough to supply me a replacement mounting bracket. I will attempt to rigg something up from behind and beneath the unit to support it further. All this could have been avoided if they fabricated it from metal. Cheaply made and shameful garbage.
Cons: Deceitful trash. Not made to support DDin DVD head units. I wouldn't dream of using these for anything.
Like my title says they work just not all that well. You are suppose to use the supplied screws that came with my aftermarket head unit but these screws only fit in 2 spots on either side of the unit. So it works but it's not the best.
DID NOT THINK I NEEDED THIS ON MY 2012 JEEP BUT THE CRUTCHFIELD ADVISER SAID I HAD TO HAVE IT AND HE WAS RIGHT!
Pros: LOOKS GOOD AND FILLS THE HOLE SO NO GAPS
Looks great in my 2009 dodge charger.
Pros: Easy install
Fit my 2013 Jeep Wrangler Unlimited perfectly. As Crutchfield's notes it does require removal of an internal piece of the plastic dash for double din/dual single unit installs.
Pros: Fits perfect Matches factory radio bezelled design on sides.
Worked well once I found screws in my own stash that fit. The screws supplied did not reach the threads on all but two of the screw holes and even then I had to really press hard to the point I felt I might actually break the plastic. I found screws in my tool box that fit so I was able install without having to go to the hardware store.
Pros: good fit,east to install
Cons: screws were too short, had to rummage for screws that fit.
Gave it 4 stars on appearance
Pros: Fits good
Cons: A little weak
This is not the right mount for a 2014 Jeep Wrangler Unlimited Sport Edition. I ended up having to go to a local electronics retailer in the middle of an installation.
Pros: Free with purchase of head unit.
Cons: Was not the right mount for my vehicle and head unit.Crutchfield response on June 17, 2014 We forwarded this review to our Technical Support team for follow-up. Lifetime tech support comes with every Crutchfield purchase.
Fit my model of stereo nicely but in my 2013 dodge avenger not so much. Would've taken extra long screws and placing the unit an inch or two from my console to make it fit!
Pros: Wrapped around my stereo nicely
Cons: Did not fit In to my car at allCrutchfield response on June 11, 2014 We forwarded this review to our Technical Support team for follow-up. Lifetime tech support comes with every Crutchfield purchase.
Installed into a 2012 Ram 1500. Kit worked perfect.
Pros: Fits good on receiver
Cons: Doesnt fit flush with my dash
fit perfect, not drilling, no cutting, looks great
works well easy to use
Pros: works as it is suppose to
Great product. Works well.
Pros: It is very easy to assemble to radio
Cons: It could be made a little sturdier, it can be a little flimsy. Maybe made from from metal, otherwise it still works perfectly.
Works as described
Looks good and if it came from the factory.
Pros: Perfect fit for double din radios.
Makes the aftermarket stereo look great in the dash of my 2011 wrangler.
Pros: Looks great
Cons: install instructions should of said remove metal bracket holding stock stereo.
These parts are intended to fill the gap between the Sony WX-BT90BT and the dash cover panel but the dash has a slight tumble home curve and the supplied kit is flat. The result prevents securing the cover panel near the top. I'm going to see what can be done to modify the part to get both sides to conform to the shape. They are also warped so they don't fit tightly to the sides of the radio unit.
Cons: Not well design warped
Looks great and holds my stereo, but its fairly soft. I'd be worried about over tightening and splitting the slots. Once you get the proper location figured out, it looks just like the dash plastic, at least in my 2014 wrangler.
Pros: Slick and oem looking.
Cons: soft, seems fragile.
Easy to install. Great product!
Pros: looks nice
This came with my order of a Pioneer FH-X700BT for our 2008 Town And Country van. It looks good, fills the space around the stereo just right and holds everything in place like it should.
Pros: It fit perfectly and my wife says it made the stereo look like a factory install.
Cons: It looks like flimsy plastic BUT, now that it is installed, I never have to touch it again.
Super fast shipping and the install kit made the new radio I put in look like it was original equiptment.
Pros: Fast shipping good quality
This dash receiver kit worked great and holds my new double din stereo firmly in place and blend right into the rest of the dash.
Pros: Firm construction Many different screw holes which will allow this to be secured to virtually any steep Great price
Wow could not have fit better Looks like OEM
Cons: NO Cons
This kit came with my JVC headunit. I had to significantly alter these pieces ( and dash opening) with a Dremel tool. Mounting holes did not match perfectly, included screws need to be a little longer. With some patience, the complete install ended up looking great.
Pros: Free with order. Thanks Crutchfield!
Cons: Poor fit for JVC in a Jeep Wrangler but I made it work.
Perfect,attached to new Pioneer head unit and looks good in double din opening,Crutchfield is the best!
Pros: Does its job
I installed this in my 2010 Ram 1500. It fits and looks decent in the truck. The plastic that mounts to the side of the stereo is too thick. The screws that came with the stereo would not reach the through the plastic. Minor detail, had to go spend a few bucks a Lowe's for longer screws but just irritating because it delayed my install a couple hours. If the plastic needs to be that thick to hold the weight of the stereo then they should provide screws with the kit.
Pros: Looks and fits pretty good in the truck
Cons: Should include screws long enough to go through the chunky plastic sides.
Simple and easy
Good product.. was easy to put in...
Looks great, fills the opening and gives the receiver a factory look.
Pros: Fits great, Looks great
Double din install in a 2011 dodge nitro...easy .....easy....easy.....metra is the best.
Pros: Metra always fits no matter what !
Used this on my 2012 Jeep JK, and it does not come with longer screws to attach to the sides of the receiver. And the screws for the receiver are too short to reach through the thick plastic of the bracket. Had to find some other screws, which did eventually work. Then bracket still did not fit 100%, had to do minor trimming to squeeze it in the Jeeps dash. Once it was all in, it still leaves some gaps that don't help it to look professionally installed. All in all, it worked with some modifications, but not happy about how much extra time it took to install my receiver using this bracket.
Pros: It was free...
Cons: No screws to replace short screws that come with receiver, does not fit 100% and requires trimming of the kit and/or dash, does not look professional once installed fully.
It fit great and looks great, I just wish it came with screws.
Pros: Fit good looks good
Cons: No hardware
This kit will get the job done, but its not a perfect fit so you won't get that factory look. Unfortunately its the only one available so it's not like you have a choice.
Fit in my Jeep like a Glove!!!
Pros: Perfect Fit and fin adjusters
Cons: Need more screws
Easy to use and fit perfect in my 2007 Dodge Nitro.
Pros: Fit great and easy to use!
Cons: No cons.
Its a great radio system. The price was good and customer service was great. Only thing is the clock on the radio needs to be bigger and it needs to show when you have the navigation going
Pros: Price and easy to use
Cons: Clock needs to be bigger and show when navigation is going
instuction noy good when using a full size deck. the back bracket had to be cut out not pulled out like instuctions said.
Pros: good looks
Cons: a little work to get in
This couldn't have been any better
Pros: Appearance matches my vehicle appearance. Doesn't look cheap.
Kit doesn't make it fit flush and very few to no adjustments can be made
Pros: It's their
Cons: Wished it made everything came from the factory. But there are Gaps on the side , we even tried to shim it. but to no avail....
Easy install. Looks factory
Installed in 4th gen ram. Kinda flimsy but worked as needed. Wish the back was molded closed b/c if you look at the right angle you can see back into the dash.
Pros: Worked as described
Cons: Wish the back was molded closed.
I read reviews on these about them being plastic and flimsy and was a little worried, but after screwing them to the radio and doing the install it's probably a good thing they are plastic. In my particular case snapping the dash panel back on seemed like it would have more difficult if these were rigid metal. They kind of bend according to how you need to snap the dash back on and i think that made it easier...
Pros: Easy install..looks good...free w/purchase
Cons: screws could have been a bit longer, but they work as long as they don't work themselves loose
Used the kit to install a Kenwood KNX5190 in my 2012 Jeep Liberty. Overall the kit worked but I would have liked the plastic to have been of a more "automotive quality " grade material. The adapter seems to be a bit flexible ( possiably not a bad thing ??).
Pros: nice looking
You have to adjust the screws on the side a little bit to get a flush look between the dash and the receiver, but it looks great afterwards.
Not very well made, kind of flimsy. Hardware should be included because the screws that came with my unit were too short so I had to go buy some longer ones.
the kit fits almost perfectly, face of the double DIN unit is perfectly flush and looks great. only problem is there are small gaps on either side of the face where you can kinda see into the dash. I took advantage of these and installed some LED's to gently light the sides of the unit at night.
Pros: easy to install
Cons: slight gaps on either side of the face.
I installed this bracket on a double din pioneer dvd on my 09 charger. it did not fit flush or correctly. screw holes sat slightly higher than it should. i ended up boring out the screw holes so the unit could sit slightly lower. it fits correctly now but it looks kinda cheapo. i would pay a few bucks to get a higher quality bracket.
Pros: easy to install. Free
Cons: Cheap looking. not an exact fit. doesnt look flush.
No info from Crutchfield on the install. There is no fact sheet available for the 2011 Patriot. So, I had to rely on on-line sources to get things put together. Note: for a double DIN on a Patriot... There is a bracket in the dash that has to be removed before installation. Some places said cut it out, but it is held in with 4 screws. Remove those and a little force and determination, the bracket will come out.
Pros: Hold the unit well
Cons: gaps along edges, but could be worse.
This worked to mount an Pioneer App Radio in my 2010 Challenger.
Pros: Looks clean
Cons: If you tighten this up, the lines get screwed up, I had to keep my loose. One other detail, is that my stock stereo bay had 4 tabs that kept a double din stereo from fitting. With a wood saw and a utility knife, all the tabs came off and my radio fit great.
Give the unit you're installing a nice clean finished look.
This was for a 2011 jeep wrangler and double din pioneer head unit and I'm not that happy with the fit! It doesnt sit flush to the head unit so it makes it kinda bow out a little. It also seems flimsy. I think I'm gonna take it out and modify it which sorta defeats the purpose of having this!
Adapters work real well makes the AVIC-F700BT fit like a glove.
To help me install this stereo into my daughters jeep [ elizabeth May 24, 2017 ]
good product [ CESAR May 15, 2017 ]
Recommended by Crutchfield. [ Brittani May 14, 2017 ]
The website said I NEEDED it. [ Craig May 14, 2017 ]
Needed for radio installation. [ Steve May 08, 2017 ]
Jeep sterio's suck [ Patrick Apr 30, 2017 ]
It goes to the radio [ Dillon Apr 26, 2017 ]
Ease off use [ william Apr 24, 2017 ]
Required for installation [ Rachael Apr 22, 2017 ]
Your site stated I needed it for the installation of my new stereo. [ Samuel Apr 20, 2017 ]
I am installing an aftermarket Radio [ Heinz Apr 13, 2017 ]
To for my stereo [ Jeanell Apr 11, 2017 ]
Recommended for 2010 Charger [ Tyler Apr 06, 2017 ]
To make it fit [ Jay Apr 03, 2017 ]
to install Pioneer 8200NEX stereo in my 2017 Jeep Wrangler [ Steven Mar 31, 2017 ]
Ease of installation. I have the steering wheel controls. [ Carlton Mar 19, 2017 ]
Recommended in install package [ Randall Mar 13, 2017 ]
install kit for radio [ daniel Mar 12, 2017 ]
For the VW [ Michael Mar 09, 2017 ]
Need it for proper fit [ WILLIAM Mar 05, 2017 ]
I thought I needed it ? [ THOMAS Mar 05, 2017 ]
I want a factory look and easy installation. [ Rob Mar 04, 2017 ]
The dash kit allowed me to remove and replace a factory head unit with a Pioneer. The kit makes that task look professional. [ John Feb 23, 2017 ]
Crutchfield suggested it! [ James Feb 15, 2017 ]
I purchased the radio through Amazon for Christmas but they did not have the necessary equipment for installation. I contacted Crutchfield and they were so helpful and set up ready to purchase everything I need to get this installed for my daughter. Thank you so much for your great customer assistance. [ Katrina Feb 09, 2017 ]
this is required [ Michael Feb 09, 2017 ]
This is the kit needed to install the unit I purchased for my 2007 Dodge Nitro. All of the Metra kits I have used before were top notch and easy installs. [ Ronald Jan 29, 2017 ]
because of the reviews and price [ Antonio Jan 25, 2017 ]
Because it was the only item with a decent review for my vehicle. Especially when compared to amazon. and the bundle price is way cheaper! [ Hunter Jan 24, 2017 ]
This was in the recommended install kit. [ Rick Jan 23, 2017 ]
Because crutchfield said it would be needed to install the radio. [ Timothy Jan 14, 2017 ]
i need it to install a pioneer radio on my jeep [ CARLOS R Jan 14, 2017 ]
This dash kit will definitely hold my radio and look amazing once installed [ Travis Jan 14, 2017 ]
I chose this to Fill the gap on my factory bezel of my 08 chrysler 300. [ Anthony Jan 03, 2017 ]
I have been told by friends when asking about stereos, all said Crutchfield, The person installing my system, also told me, Crutchfield, it will be what you want. Thank you. [ John Dec 30, 2016 ]
It was in the kit offered [ Zachory Dec 28, 2016 ]
Part of install package [ Jeff Dec 27, 2016 ]
Best features for my needs and the high satisfaction rating. Also you can't beat the price! [ Patrick Dec 27, 2016 ]
Installing a pioneer 5200 avic nex stereo into a 2008 Jeep Wrangler jku [ wendy Dec 27, 2016 ]
recom by Crutchfield advisor [ DAVID Dec 26, 2016 ]
Part of Installation package [ Michael Dec 21, 2016 ]
it was recommended [ JOSEPH A Dec 14, 2016 ]
We have installed Crutchfield items before and we know from experience the install kits make the installation so much smoother. [ Carol E. Dec 11, 2016 ]
Needed [ Jeff Dec 02, 2016 ]
It's guaranteed to look professional and be a clean install when Crutchfield picks the parts for your vehicle. [ David Cardenal Nov 30, 2016 ]
It was in the install kit. [ Kurt Nov 29, 2016 ]
Crutchfield suggested it as the proper kit for my vehicle and radio combination [ Martin Nov 28, 2016 ]
Install with Jeep [ KENT Nov 26, 2016 ]
Required for installation [ Juan Nov 17, 2016 ]
Worked awesome on 2010 Ram.... Looks factory! [ William Nov 15, 2016 ]
My car [ Saul Nov 15, 2016 ]
need to mount kenwood I bought from you [ rhonda Nov 11, 2016 ]
Chose this because the HU does not fit inside my 13' Wrangler without it.... [ Casey Nov 05, 2016 ]
Came with unit [ Robj Oct 20, 2016 ]
Recommended by Crutchfield associate. [ Larry Oct 14, 2016 ]
Needed for install and suggested as part of install gear. [ Shawna Oct 13, 2016 ]
Because you said I needed it [ MARC L Oct 02, 2016 ]
To make instillation easier and look professional [ Clyde Sep 29, 2016 ]
For my wife's car [ Daniel Sep 27, 2016 ]
Needed for installation of Soundstream VRN 64-HB [ Dyron Sep 23, 2016 ]
Needed for install in 2009 Jeep Unlimited Wrangler [ Michael Sep 05, 2016 ]
Fits its purpose and I know I can rely on crutch field for the right items. [ David Sep 05, 2016 ]
I plan to install the single-DIN Alpine head unit in my Jeep Wrangler's dash, along with a single-DIN Cobra CB radio. I don't like any other mounting option for the CB in my Jeep's interior. [ Brian Aug 30, 2016 ]
helps with install of the radio [ Patrick Aug 30, 2016 ]
Metra products have never let me down in over 20 years of installs. Quality products and support everytime [ Shawn Aug 29, 2016 ]
Included with order to install in my vehicle, 2008 Dodge Nitro. [ COREY Aug 25, 2016 ]
Was part of an install package [ john Aug 22, 2016 ]
This is the one Crutchfield suggested [ Charles Aug 19, 2016 ]
I need the bracket adapter to fit my Kenwood stereo in my 2015 Jeep Wrangler. James from the Crutchfield department gave me this part number. James' Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=104 [ PATRICK Aug 08, 2016 ]
recommended by add proces. [ Albert Aug 07, 2016 ]
New head unit [ Christopher Jul 29, 2016 ]
its the only one that fits this vehicle. [ Marsha Jul 11, 2016 ]
Fitment [ Roger Jul 08, 2016 ]
cause it told me too [ Joanna Jun 20, 2016 ]
It was recommended [ THOMAS Jun 18, 2016 ]
Needed for double din stereo install [ tim Jun 15, 2016 ]
It fits my car.... [ Kyle Jun 12, 2016 ]
Paul said I needed Paul's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=101 [ MARK Jun 07, 2016 ]
Needed this to install a double din receiver in my 05 Cobalt SS [ Ethan Jun 05, 2016 ]
because the one I have was a one piece and I had to cut it to make it work & it looks bad I want my head unit to look like it was factory [ Steven Jun 04, 2016 ]
Perfect fit for my son's car [ GLENN Jun 01, 2016 ]
its the best kit to make your jeep look sharp [ NICHOLAS May 31, 2016 ]
When researching products for my make and model, this item constantly came up as the one people chose. I did the same especially after the site recommended it within the receivers page. [ Martin May 27, 2016 ]
Necessary to complete proper installation. [ Terry May 23, 2016 ]
Makes installation a breeze. Wouldn't try it without one. [ Kenneth May 22, 2016 ]
Crutchfield's dash and wiring kits make the job so much easier. Their customized instructions are a definite reason to go with Crutchfield. [ Paul May 19, 2016 ]
free [ ARETHA May 15, 2016 ]
needed it [ Paul E. May 13, 2016 ]
It was what came recommended from Crutchfield [ Harry May 08, 2016 ]
help with install [ Jamieson May 02, 2016 ]
I am a fan of a good clean install. A install kit assures that your install is not only clean but solid and safe. [ Bernard Apr 25, 2016 ]
because crutch field saaid they would fit [ matthew Apr 21, 2016 ]
It fits my jeep [ Nicholas Apr 13, 2016 ]
Metra makes a very nice dash kit [ JOSEPH Apr 06, 2016 ]
name and price [ C Apr 02, 2016 ]
It was part of the package [ Oliver Mar 29, 2016 ]
This kit is required for instal into Chrysler vehicles. [ Anton Mar 14, 2016 ]
To get the clean look of a professional/factory install without paying for it! [ JARROD Mar 14, 2016 ]
Needed to do proper install [ Tanasia Mar 09, 2016 ]
Recommended by Crutchfield for my 2015 Jeep Patriot [ Greg Feb 28, 2016 ]
this was referred to me when i selected the type of head unit for my truck. it's almost effortless in deciding what will fit/work with your vehicle. Crutchfield has always been fantastic in taking care of it's customers. Always readily available to answer question/tips and provide top notch customer service. I will continue to purchase all my orders through them. [ Kelby Feb 22, 2016 ]
Essential to buying and replacing new stereo that is a double din radio. [ Cody Feb 20, 2016 ]
works for my car [ James Feb 18, 2016 ]
make the install look at lot cleaner in the dash..and easier.. [ S Feb 16, 2016 ]
Colors [ heather Feb 14, 2016 ]
To make sure my installation is first class solid installation in my Jeep [ Jeff Feb 10, 2016 ]
Pre-selected based on radio and my selected car... [ Michael Feb 05, 2016 ]
recommended by specialist [ James Jan 28, 2016 ]
came with kit [ Thomas Jan 09, 2016 ]
Perfect fit for my Jeep Wrangler [ Gregory Jan 05, 2016 ]
required for aftermarket head unit [ FELIX Jan 05, 2016 ]
Needed for stereo install for my Jeep Patriot. [ Rob Jan 04, 2016 ]
It works with the radio I purchased. [ CAITLIN Dec 31, 2015 ]
Fits my car [ JOHN Dec 28, 2015 ]
Recommended by Crutchfield. I trust them. [ JEFF Dec 24, 2015 ]
easy one stop shopping instead of shopping around and great pricing everything you need [ Anthony Dec 18, 2015 ]
Because it was recommended [ William Dec 17, 2015 ]
Needed it. [ MATTHEW Dec 08, 2015 ]
Need it for install per crutchfield recommendation [ Scott M. Dec 06, 2015 ]
attaches to double din radio for seamless fit with factory screw locations. [ gideon Dec 04, 2015 ]
You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle. [ Krissy May 13, 2016 ] Staff
You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on what kits are available and what you will need for an installation in your vehicle. [ Kenny Apr 04, 2016 ] Staff
There is no compartment included so it would just be a hole into the dash [ ETHAN Apr 04, 2016 ]
It will fit but you will have a gap [ NICOLAS Jan 25, 2016 ]