Metra 95-7313 Dash Kit
2003 Kia Optima
Crutchfield Customer Review (What's this?)
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item # 120957313 | MFR # 95-7313
$14.99 Earn up to 15 Rewards points
The Metra 95-7313 kit allows you to install a double-DIN (4" tall) car stereo in your vehicle's dash opening. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this kit is compatible with your vehicle. Warranty: 60 days.
Note: Most vehicles will require additional installation parts please identify your vehicle if you haven’t done so. You can also call an Advisor for more information.
Average Customer Review(s):
Faceplate looks cheap
Cons: The holes on the brackets don't have holes on there that were needed to line up my radio properly so I am going to have to drill holes in it.
Fits as described, but the other edge is not ridged enough and can interfere with the display screen when tilting. The side flanges slide into the face frame as they should, but the screw cut outs on the front are too large, and difficult to fasten properly.
Pros: Works good enough, but far from ideal
Cons: Let the hunt for just the right size flat screw head begin
A must have. Perfect fit, easy to install.can't ask for more!
Pros: Perfect fit. Easy to install. Everything you need included.
This part made my installation look like a professional did it! I have never done an install myself, and it looks great! Excellent instructions and support!
Easy to install with easy to follow instructions as always from Crutchfield. The only issue I have with this product is the factory radio mount had two lower screw tabs to support the radio from the bottom, with four more on the sides. This product only had the side mounts which worked fine but I was a little concerned that the bottom mounts would hold the double din unit up better had they been there. Time will tell. Other than that, installation was a breeze. I would recommend this product to a friend.
Pros: Easy to install, instructions clear and easy to follow. Took less than 4 minutes to clip off the extra tabs and put double din into place
Cons: Missing two lower mounts that were on the factory mount
Like most Metra kits, some assembly and general installation knowledge are required. Instructions are adequate and the finished install is seamless.
Pros: Seamless, looks great, easy install with basic hand tools.
Dash Kit was east to install. Stereo fit great in it and looks good. Looks OEM
Perfect Dash Kit to mount the new radio that replaced the factory radio in the '04 Sonata. It's plastic, but the side parts are quite sturdy. It did not come with screws - so we used the 4 screws that came with the radio. Lots of openings on the side so you can make sure it will align. Installed straight in without having to readjust. There's a 4-prong and 3-prong on the sides, so really only one way to put it together, although it did come with instructions and the sides are labeled (left/right). I would have preferred a few more screws to really secure the radio, but realistically: there's no where for the radio to go, so 4 screws will definitely suffice to keep it well in place. Recommend this product.
Pros: Easy install (comes with instructions & sides are labeled); perfect fit.
Cons: plastic, albeit sturdy; no screws
Intsalled ok except the pieces didn't line up exactly as designed. I ended up need to remove the stereo and part of the several times in an attempt to get the face plate to fit properly around the stereo. In the end the the trim ring did not fit into the hole in the dash property and is slightly askew.
Pros: Better than using nothing.
Cons: Tolerance is off and does not fit well enough to look like a professional install.
It is a good kit but I had to so some filing to get it to fit properly on the dash not a big deal.
Pros: Strong and adjustable.
Cons: Might have to file to fit.
Fits in my 2005 Santa Fe better than the 95-7309 kit that was designed for it. Still had to modify it slightly by extending the current "cutout" on top by about an inch on each side. Was way less modification than the 7309 kit would have required. With the later model first gen Santa Fe's the buttons and indicators above the heat vents are different, when the dash is put back in place they put pressure on the dash kit and in turn bends the top of the face of the head unit above the dvd slot. I would like to add that this kit allows the head unit to sit where it should instead of extremely recessed like the 7309 kit. (i couldn't even grab my volume knob it was so deep before) Also, Crutchfield has the image of this kit upside down.
Pros: Fits Late model first gen Santa Fe's
Cons: Still requires slight modificationCrutchfield response on June 1, 2015 Once we saw this review, our Product Research team corrected the photo on our web site. They also contacted our kit manufacturers to reevaluate the best solution for this vehicle.
This was sent as part of the installation kit I purchased along with the Jensen VX-3022 unit for my wife's 2004 Hyundai Santa Fe (has the 6-CD Monsoon unit). This 95-7313 IS EASILY 1/8"+ too wide for the opening in the dash of the Santa Fe. In fact a Santa Fe isn't even listed in the manual that comes with the 95-7313. I had to cut pieces off and glue part of it back together so it would fit and allow me to get the dash piece back on correctly.
Pros: It was part of the install kit
Cons: it doesn't fit an 04 Santa Fe double DIN opening w/o modifying the 95-7313Crutchfield response on May 6, 2015 This was a mistake in our database. Upon seeing this review, our Tech Support team found the right kit and sent it out to the customer. We will correct our database so that future customers get the correct kit.
Looked like a perfect factory install when we finished. Very happy as always - thank you Crutchfield
Pros: Extremely accurate fit
After reading many very negative reviews about Metra install kits for my 2006 Tiburon I was a little concerned when I had to order this one. After receiving and reviewing the installation instructions I began the install and I now wonder what all of the negativity was about! The kit installed my Pioneer double dim radio perfectly and, including tying all the wires together, the total installation time was about one hour.
Pros: Perfect fit
Fit perfectly in my Hyundai Santa fe 2004. I'm so happy because now I can listen to music on my phone. It looks really smooth too no gaps or anything.
Pros: Easy to assemble looks good Quick install
Works like a charm. Don't manhandle it or you can break it!. In the 2003 Santa fe install upside down!! And lower in the cavity than the original double din radio. Careful with install screws the fascia is plastic and if you over torque screws, you'll be sorry.
Pros: Easy to use and install. Crutchfield to the rescue again, the included kits make install a breeze, as does the master sheet.
Cons: Can be broken with relative ease if you don't pay attention. But that can be said of many things.
Only four stars because, let's face it, plastic is cheap, chinsey and easily broken.
Pros: Easy to install.
Cons: Made of plastic, cheap plastic.
Works as described
This item was the perfect fit for my 04 Sonata. I installed a Kenwood DD receiver. Once the factory installed radio brace is removed installation was a snap.
Pros: Priced right, ease of installation and fit.
Cons: Kit doesn't included screws to attach kit to receiver.
The sides worked great , I didn't use the front trim it wouldn't allow the motorized face of the DNN990HD to close right.
Pros: Great fit
Cons: Front trim doesn't work with the DN990HD
Installed into a 2005 Kia Optima LX with a Pioneer AVH-X4500BT. This is a DVD reciever, unfortunately the Metra kit will NOT work with DVD players that have a fold down screen to load the DVD(Metra tech rep replied to my e-mail confirming this). Just used side pieces. Good customer support from Metra but wish they had a note in the booklet that came with it indicating that the above receiver will not fit.
Pros: Fit the vehicle well. Installation booklet did have instructions regarding vehicle trim removal.
Cons: Frame portion cannot be used for tilt loading DVD players.
Decent product! Works as intended, facilitates installation of head unit. Although, the bracket should be more application specific in that it should replicate all anchor points of the OEM equipment so it can provide equal support.
Pros: Best option out there
Cons: Requires minor mods for the 2003 Tiburon
Great product easy to install. Fit my dash perfectly.......................
Pros: Looks and fits great.........
The kit fits the dash opening perfectly and makes the JVC double DIN I installed look like factory. Simple to assemble.
Pros: It's Metra, looks and fits great. Easy to assemble.
Cons: Dash mounting tabs could be stronger, but once installed it seems sturdy enough.
After I figured out how it was used installation went smoothly
Pros: Good fit for my car Looks professionally done
Cons: To a little time to figure out how it was used for my car Needed some modification
Worked perfect for my install. I was installing a new Pioneer FH-X500UI in my 2003 Hyundai Tiburon and had no issues with this kit. I followed the instructions and it fit perfect. Looks like it was a factory install because of this!
Pros: It worked for my car just right
Cons: Plastic seems like it would break... but worked fine
WORKS AWESOME, EASY INSATLL
Pros: FITS PERFECT
Does the job, fits well in the car. Feels sturdy enough. And doesn't look cruddy once the install is finished.
didn't work, didn't use, had to modify factory brackets to install
Cons: wrong style, didn't work
Eventhough this kit is not listed for a 2003 Hyundai Santa Fe, it is the perfect fit for it If you have the Monsoon stereo upgrade. (Perhaps others as well, not sure on that) The one recomended by Crutchfield does not work due to being too bulky, this kit will work and look like factory. I have a Sony XAV-64bt and it look awesome
Pros: Looks like factory and easy to install.
Cons: Metra Should look through their products and verify that this is the appropriate kit for a 2003 Hyundai Santa Fe So Customers don't purchase the wrong product.
This kit was a perfect fit for my car and head unit.
The bracket fit my double DIN head unit perfectly with a couple minor exceptions. The side tabs on this kit provide a number of precut openings for mounting screws. One opening on each side aligned perfectly with the existing screw locations on my head unit. Two more required minor enlarging of the tab opening to line up well. After making this mod I had two screws on each side securely holding the bracket to the head unit. I then tried sliding the bracket into the dash opening and discovered that more trimming was needed to allow the bracket to align properly in the dash opening. First I had to trim about an eight of an inch off of each side tab on the kit where they protruded above the top of the head unit. Until I did this the unit sat too low in the dash to line up with the dash mounting screw holes. Once that was done the radio itself fit fine but then I noticed that the mounting tabs sticking out in front to mount the radio to the dash were too long to allow the car trim panel to be reinstalled properly after the radio was installed. I shortened those tabs up with a dremel tool so the panel would seat properly on both sides of the radio and that still left plenty of mounting surface under the screw heads to secure the unit to the dash. This all sounds like more work than it really was. The plastic parts are pretty easy to trim. The end result is a securely mounted good looking install.
Pros: Looks very good once it's installed in my 01 Elantra. Very professional looking.
Cons: Needs some minor work with a razor knife or ideally a Dremel tool to fit properly.
It fits, but it is very very snug. I had a hard time get it to line up right. There are two holes in the dash for mounting at the top, this only uses one and its not the top hole i found out (the directions are very unclear here). Plus even after remounting to the lower hole i could not get the dash faceplate on. I had to loosen the screws and push it as high as i could while keeping it mounted in the lower holes. The dash plate still took some work getting on. If you don't do the push up, the bottom brackets in the dash plate will not meet the lower holes. I also had to trim a bit of the plastic off the outside edge of the kit and really push towards the radio on both sides on the dash plate to get that area to pop into place.
Pros: Once you get it in, it looks great and just like a factory install.
Cons: was alot more work than i was expecting to get it to line up correctly.
I didn't really need this, the trim w/the stereo fit in my existing opening
This was the cheapest piece of plastic I've ever seen. It fit--- kind of, after you have to sand off the tabs so that it actually fits the car, but the plastic is warped and bends down to cover the cd slot. Really really cheap.
I got this with the Clarion NX409. The trim piece the brackets fit into didn't fit around the face of the deck, but th fit was fine with just the deck face. The brackets themselves required some additional drilling to match up with the deck's screw holes. In the ones it lined up with naturally, it caused the deck to be too recessed in a 2001 Elantra. But, it worked after some slight modification, and making one plate for every deck out there can be tricky, so I'll give them some credit. In the end, it got the job done, just not quite out of the box.
For single-to-double din upgrade, this kit needs some tweaking to fit in the '07 Tib. I had to cut the brackets apart, using the lower 3-hole tab part (as pictured) to make the HU fit. Not a perfect fit, as the lower mounting holes in the dash console are recessed back. Still, works using just the upper mounting holes and drilling a couple of additional holes for support.
It was free [ richard Jan 05, 2017 ]
Husband asked for it. [ Inara Dec 13, 2016 ]
Need for sons Hyundai, previously bought a double din unit from crutchfield. [ Bill Nov 25, 2016 ]
No one wants a stereo that looks like an add on. With the Dash Kit your unit is mounted securely. And the trim gives you a factory or better, a custom install. [ Jackie Dec 17, 2015 ]
Pull the ashtray out. Yank on the black bezel with fingers. Don.t use a screw driver to pry out. It will damage the metal bezel. You will see the screws after the bezel comes off. [ Michael May 08, 2016 ]
It's very easy. Just you tube the video. [ Jeff Apr 25, 2016 ]