2006 Acura RSX
Crutchfield Customer Review (What's this?)
Fit perfectly and was surprised how well it fit.
Pros: Perfect fit
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item # 120957867 | MFR # 95-7867
$14.99 Earn up to 15 Rewards points
This Metra 95-7867 kit allows you to install a double-DIN (4" tall) aftermarket stereo in your vehicle's dash opening. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this kit is compatible with your vehicle. Warranty: 60 days
Note: Most vehicles will require additional installation parts please identify your vehicle if you haven’t done so. You can also call an Advisor for more information.
Average Customer Review(s):
Fit perfectly and was surprised how well it fit.
Pros: Perfect fit
This fit the old radio opening perfectly, appearance, materials and texture don't feel cheap. I did not rate full 5 stars for two reasons: 1- The mounting of the hazard lamp switch does not correctly align the button in the opening, which causes the button to stick. I solved this by placing a 2mm spacer in the lower mounting screw hole. This allowed the button to be centered and aligned to not catch the Metra panel. 2- The opening for receiver is slightly too tall and allows for a 1mm gap along the lower edge. I solved this with a creative use of electrical tape.
Pros: Solidly made, looks good.
Cons: Poor out of the bag hazard switch alignment, small gap at bottom of receiver opening, which are easily correctable by a creative installer.
This kit fits the dash perfectly. It lacks the clips of the OEM panel, but this doesn't seem to be a problem. However, it doesn't fit the OEM flasher switch correctly. I had to do a little filing to make it work right. It's no big deal, but others should be aware.
I ised this for my 2002 RSX and its amazing! If bolts on to the radio bracket and fits right in. I used it with a double din head unit and it looks great with its matte black finish. I would definitely recommend this product.
Pros: Easy to usee and install
Fits like it was made for my 2004 Acura RSX. Oh! It was.
Standard dash kit that fits well in RSX. Very slight gaps, but caused from stretching dash to remove stock stereo. Plain, but sturdy and classy looking. Was under the impression that it came with the mount as well for the stereo. It does not, but you can just use the stock mount from the old stereo so not a big issue. Also, it does ask you to screw the stereo mount into this dash kit, but doesn't provide you with the screws; minor nuisance. Overall, happy so far.
Pros: Fits well. Sturdy. Simple.
Cons: Doesn't come with screws it requires.
Not the best
Pros: Overall looks good. Pretty simple nothing fancy
Cons: Having problems with my hazards and indicators. If I use the hazards I have to kind of push in the dash kit because for some reason it makes the indicators not work. After u slightly push in the dash kit the indicators start to work again. Idk maybe it was bad installation but some kind of switch between the hazards and indicators behind the dash kit is being effected
Fit perfectly and looks better than stock.
Came as mounting option for double-bin jvc receiver.
Pros: Looks great, fits perfect.
Cons: No clips like stock unit, but it slides in tight and doesn't really need them.
fits right in well into my RSX. Perfect size
Pros: Affordable, simple
Cons: Looks plasticy
Good trim piece, and is tailored well to fit into the OEM. Can be a bit finicky for flush fit, You need to be sure that the alignment with the head unit is perfect to get the trim to fit flush, or it can work itself up/proud of the surrounding center console with vibration. Also, for my model ('02 RSX-S), which had an integrated head unit, there were NO screws to attach the Metra to the replacement head unit (so the instructions are assuming incorrectly that you're re-using screws). Quick trip to the hardware store, but annoying nonetheless to get the additional hardware.
Pros: Clean fit, overall. A bit finicky, but sizes and tolerances are quite good. Vibration (from driving) can cause the trim to shift around a little (~1mm) so be sure you're aligning it up consistently, and securing the head unit tight. Once aligned, it's not an issue.
Cons: Did not include screw hardware. Instructions assume you're re-using screws from the old unit, which in my case ('02 RSX-S), it did not have.
Fit my Acura RSX Type-S w/ a JVC Double DIN receiver like a glove. Appears to be good build quality. Was missing the correct size screws for the face plate but easily found others in my bucked of bolts that worked.
Pros: Easy to install Great fit Quality Construction
Cons: Would be five star if it contained the four missing screws I needed Was not a big deal but others may be upset by a trip to the hardware store.
Looks OK, not much different than the original but the build quality seems a bit cheaper than the original Acura receiver plate.
Factory fit. Solid feel to it. Mind rubber texture, doesn't look cheap. Awesome piece.
Awesome! Looks nice and clean fits very well! Everything is awesome!
Pros: Looks nice and clean and fits great
Cons: No cons
This part looks grate like it came with the car. Only thing I didnt like was its a little too plastic looking.
Pros: Fit is good.
Cons: Look is cheaper looking then stock
This product came free with my Kenwood in-dash GPS. It fits perfectly in the opening for the RSX however my Kenwood has a nice gap around the edges. The included frame for the Kenwood does not fit to cover the gap either. The screws that come with the kit only mount the radio to the existing metal cage and to screw the outer and inner face plate together. However, if you have the Bose radio, you lack the 4 screws to mount the cage to the face plate. You'll have to source these from Acura or local hardware store. The color matches fine.
Pros: Color matches
Cons: Fitment and lack of hardware
Because i need it for my jetski. Reallyy hope the double din is waterproof! [ Omar Jun 30, 2016 ]