Excellent Fit and Finish
2004 Toyota 4Runner
Excellent fit and finish. High quality materials provide for a near OEM look.
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item # 120958210 | MFR # 95-8210
$14.99 Earn up to 15 Rewards points
The Metra 95-8210 kit allows you to install a double-DIN (4" tall) car stereo in your vehicle's dash opening. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this kit is compatible with your vehicle. Warranty: 60 days.
Note: Most vehicles will require additional installation parts please identify your vehicle if you haven’t done so. You can also call an Advisor for more information.
Average Customer Review(s):
Excellent fit and finish. High quality materials provide for a near OEM look.
The plate looks great as if it were always part of the car. It was a little hard to get perfect the first time but then it clicked and fit perfectly. A quick call to support on orientation of the side tabs them everything was smooth from there.
Pros: Looks great
Cons: A little unclear on tab orientation but Crutchfield support was great.
Great product and easy to install!
Super easy to attach to the after market stereo. Looks clean.
Pros: Easy attachment and clean look
Cons: Plastic seems a little flimsy. Be careful not to over tighten screws.
This mount did not fit when I went to snap the panels back in. It was too wide and too big in general. 2006 4runner.
Cons:Crutchfield response on March 22, 2017 We're sorry you experienced problems installing your kit. We forwarded this review to our Technical Support team for follow-up. Lifetime tech support comes with every Crutchfield purchase.
This kit does not fit a 2003 4Runner SR5 V6 without JBL & Navigation. My receiver (Kenwood DDX374BT) barley fits inside my dashboard. I haven't had time to cut this dash kit to fit, but it needs MAJOR trimming to fit. The bottom piece is way too wide and the sides are also too wide to fit in the dash by itself without the receiver. Good thing it was free.
I had issues with this face plate, as far as the car it fit well and looks good. On the other hand the first head unit I got was a Blaupankt and it would not fit. Not even close.... The second unit I got was a Pioneer MVH-AV290bt, it was close but I did have to shave the plastic to make it fit. The face plate has rounded corners and the radio of course had square corners. After some filing, sanding, and then polishing the plastic again it fits and looks good.
Pros: Fits the Limited Radio Bezel perfectly
Cons: Did not fit the radio face well.
Perfect fit for JVC in my 2005 Toyota 4Runner. Argued with my son whether the plastic kit fit between the radio and the factory metal brackets or on the outside. Outside the bracket is the way to go.
This does not fit a 4Runner sport it is for the limited 4Runner only
Cons:Crutchfield response on December 28, 2016 Whenever you encounter a problem with anything you purchase from Crutchfield, especially a situation like this, please contact our tech support team right away. They can help you solve the problem and get the kit installed correctly! Lifetime tech support comes with every Crutchfield purchase.
Fits the car and appearance fairly well. But it took some work to fit it to a Blaupunkt head unit. The radius on the corners of the Blaupunkt were smaller than that of the Metra unit. This required some filing and shaping to get it to fit into the opening.
Pros: Fits car Looks like OEM part Inexpensive
Cons: Required some fitting
Fit was good but the finish is not as good as surrounding OEM plastic. Instructions failed to mention the re-use of the stock bracket, odd.
Clean install. Radio fits tight like a factory install
Pros: Looks like factory
Looks good .
Pros: Fills in the gaps nicely.
Cons: Instructions didn't say to place the factory brackets over or under the new brackets.
Fit like a glove for a double din Pioneer on a 2003 4Runner Sport with JBL 10 speaker system with RDS.
Pros: Easy to install
Nice product and a good value. Gives the installation a factory look.
Pros: Simple to install, good price, nice looking.
Worked perfect in our 2007 4Runner Limited. Seamless fit. Looks great.
Pros: Looks as good as factory installation.
The product worked, however the directions were inadequate.
Pros: The bracket fit the space.
Cons: Step 6. was missing from the disassembly instructions and some of the directions and figures did not match the model of my car.
I don't know if it was the kit or the unit I was installing (Pioneer AVIC-8000NEX) but this didn't fit the unit quite right. I ended up not using the plastic brackets and cutting off the bottom part of the kit and got it looking alright.
Did not work well with Clarion Double DIN unit. Very tight and caused tightness where MENU button was not functioning properly.
This mounting bracket fits nice with my Toyota 4 runner 2008.
This does not fit the SR5, it is for the limited model. Needs to be cut down and modified to work. The SR5 uses a different install kit.
Pros: Crutchfield sent me the correct kit when I contacted them! OUTSTANDING customer service!!
Cons: Does not work with sr5 model.Crutchfield response on January 14, 2015 We're glad we were finally able to get you the correct kit for your truck. As it turns out, you can't even rely on the trim level of the truck to determine which kit is the right one. It's the specific radio in the truck that is the final determinant, and that can vary in each trim level. This kit, the 95-8210, fits trucks that have factory radios with RDS. (There will be an RDS logo and a separate RDS button, both along the top of the radio.) If your radio doesn't have this RDS callout on the face, then the 95-8202 is the proper kit. Thanks for taking time to submit your review and don't hesitate to contact us if you have any other problems with the situation or need anything else.
Did not need to use supplied brackets, but fits and looks great. Those who are experiencing trouble seem to be trying to use this with a receivers with fold-down face. This kit does not work with those units; only fixed face units.
Item does not fit the Clarion CX-501. Side to side it fits but up and down its to short by about 1/8". I was able to make it work by cutting 1/8" off the top. Took me about an hours to modify but now fits radio ok. Didn't even need to use the side brackets. Item fits my 2003 4Runner Limited dash just fine though. I would try a Scorche kit next time.
Cons: does not fit all radios
The team I worked with at crutchfield had a hard time understanding that the SR-5 and Limited have different dash configuration. They do, I saw it. Really. They keep shipping this kit made for Limited for the SR5 4runners. They did this twice. The SR5 uses the Metra 95-8202 In-dash Receiver Kit but you have to call customer service and tell them. They still ship the wrong one but it is worth a try.
Pros: None did not work for me
Cons: Does not work for the SR5
Fits and looks decent. Screws from factory unit we not long enough for brackets, had to rig it up. Wish there were more options.
Pros: looks decent when installed properly
Cons: No alternative available
First of all, this unit is the best available dash kit for my installation application using Kenwood's new DNN990HD. That being said, it did not fit as shipped and required MAJOR cutting/dremel work to modify it and allow for the faceplate of the Kenwood to rotate freely. I was not planning on needing to do this and felt less than comfortable making these modifications. Ultimately it came out OK but lees than completely satifsied with the ending asthetic result. To Crutchfield's credit, they sent me two additional kits at no cost when I mis-cut the first ones.
Pros: Fit the dash
Cons: May not fit you chosen receiver so investigate this and be prepared for the possibility that you may need to cut/modfy it.
Fits great with my double din hu.
not sure why this piece was even sent. this doesnt fit at all.
Cons: doesnt fit.
This dash kit does not fit a 2005 4Runner Limited. It was way too big and frankly, I have no idea how it could fit any of the 4Runner trims. Be cautious ordering this, since it will most likely not fit.
Cons: Doesn't fit
This kit does not fit a 2006 4runner with JBL or a Pioneer AVR-4400BH. Substantial trimming was necessary to get the head unit to even fit it. Mounting locations do not allow the kit to sit flush with interior moulding. The kit is however more closely matched to the interior than the Metra 95-8202 which was originally shipped with the head unit.
when installing the sony XNV-770BT in my 2003 4Runner Limited JBL (no factory nav) the opening for the head unit was too small. I had to trim the opening a ton in order to get it to slide in.
Pros: worked great with other head units
Cons: does not fit and required a lot of trimming
Kit did not fit 2004 SR5 4Runner. Would have required a large amount of trimming to work with factory center bezel. I did not install this kit, and instead decided to use another kit, which did fit.
This dash panel looks great and is very easy to install!
This is the metra 95-8210 kit and it didn't fit my 2006 SE with a non-nav JBL/six-disk head unit. I was installing the Kenwood DNX6960 and this kit came free from Crutchfield. The kit brackets mount onto the factory brackets and have little alignment bumps that mate with detents on the factory brackets. Basically, you'd have to be trying to mount the kit brackets wrong. With the kit brackets mounted, three of the four factory bracket holes line up - not a big deal. The problem is that the bezel will not line up with the kit bracket attaching tabs. Not by a long shot. To get this kit to work, you'll need a dremel tool and a flat file to remove a lot of plastic from the back and sides of the bezel. Looks like this kit now has two bad reviews. See my good reviews on the PAC TATO and SWI-JACK that were installed along with the Kenwood.
Well this looked nice and somewhat installed correctly except it is not compatible with a 4Runner that has OEM nav. So if you choose that you have a JBL and RDS system (which nav models are) then you will notice that this is offered to you. IT WILL NOT FIT YOUR DASH CUTOUT! You will have to find and use the ones that are little side tabs if you can find them in stock. Also this is not a Crutchfield problem all vendors show this to be correct it is just that the companies that make all these trim kits not just this brand do not include nav models in their research. Hope crutchfield does more research and fixes this so its more clear.<br><br> <b>[Editor's Note: Thanks for bringing this to our attention. We have confirmed that you are correct, and have corrected our database.]</b>
It was automatically recommended for me. [ Andy Apr 27, 2017 ]
To fit my 2005 Toyota 4Runner [ Ralph Jan 23, 2017 ]
Fits my car [ Joe Dec 26, 2016 ]
Fit my 4Runner [ Max Nov 29, 2016 ]
MAKES FOR AN EASIER INSTALLATION!! [ CHRISTOPHER Nov 24, 2016 ]
good price [ Jeffery Jul 03, 2016 ]
ease of install [ JAMES May 07, 2016 ]
so it fits correctly [ gregory Apr 21, 2016 ]
needed it for the installation.. [ Minnette Feb 24, 2016 ]
I want a professional look for my new receiver. [ Natalie Dec 15, 2015 ]
You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle. [ Krissy Sep 20, 2016 ] Staff