Metra 95-8214T Dash Kit
2009 Toyota Tacoma
Worked like a charm in my 2009 Toyota Tacoma.
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item # 120958214B | MFR # 95-8214TB
$24.99 Earn up to 25 Rewards points
This mounting kit allows you to install a double-DIN (4" tall) aftermarket stereo in the dash opening of your 2005-11 Toyota Tacoma. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this kit is compatible with your vehicle. Warranty: 60 days.
Note: Most vehicles will require additional installation parts please identify your vehicle if you haven’t done so. You can also call an Advisor for more information.
Average Customer Review(s):
Worked like a charm in my 2009 Toyota Tacoma.
Pretty good dash kit. Got because Crutchfield recommended. This matches texture on dash already. I think the other one they have is smooth. Plastic brackets are flimsy as everyone says. So you have to hold and push into right spot as you tighten bolts. I see it sitting out slightly from dash. Not sure anybody else notices.
Pros: Matches textured areas, color match pretty close, decent instructions with it
Cons: Flimsy plastic brackets, fit is not perfect
Solid fit on my 06 Tacoma. Takes a little dexterity to install but nothing to be afraid of. Looks almost factory.
fits like it was from the factory
Easy to install! Had to shave around hazard button, was sticking. Used factory radio mount, wasn't impressed with the plastic one in the kit
Pros: Looks factory, ease of installation.
Cons: Had to shave around the hazard button, radio mount was plastic.
Great kit....looks like stock!! I have a 09 Tacoma and I found that if you want a great fit...leave all four screws loose, then fit the head unit into the kit opening and snap it in the dash, then snug up the four screws. Snap in the a/c controls below and you are done!!
Pros: easy to install beautiful finish
Great fit, good instructions on getting it hooked in. Looks so professional
looks like factory dash panel
Pros: easy to install and looks great!
Perfect fit for 06 Toyota Tacoma and Pioneer AVH-x2800BS
This kit would be so much better if they would supply metal brackets instead of the cheap plastic ones. It was a tight fit for my radio to go in my dash and I kept worrying that I was going to break the plastic brackets when reinstalling it. Now that it is in it looks good.
Pros: Looks factory
Cons: Cheaply made
Dash kit matched up perfectly. It is a little tight where the hazard button is but overall, it is fine.
Cons: Tight where the hazard button is, so the button sticks a little.
Great product. Fit perfectly. Great instructions.
Trim around the opening wouldn't snap into place.
Pros: Replaces stock trim
Cons: Trim around the opening wouldn't snap into place.Crutchfield response on December 13, 2016 Once we saw this review, our Tech Support team reached out to Robert to issue an apology and help him further. We'll either help him get the kit working the way it should, or help him return it for an exchange or refund.
First kit arrived with a broken piece. Crutchfield replaced immediately, no problem. A bit of a fit problem though - the flasher button gets stuck when depressed and it takes some nudging of the dash mount to turn it off.
Matched perfectly in my Tacoma.
Pros: Great color match Looks like it came from the factory
Cons: Edges were rough in some places
Great product. Matches my Tacoma interior perfectly and made install quick and easy.
Fit was good but pictures of this shows bezel around unit to be black but the one in the kit is silver, maybe I could return for a different one, but did not, if I choose to "sparky" would take care of me
Pros: Fit good in my 2009 Tacoma
Cons: Not what the picture showed bezel is silver in the kit I received , black in the advertisement
Good kit, but not 100% turnkey, for a good outcome you need to reuse the metal brackets off the factory radio, and the factory clips, I also used a little double sided 3m foam tape on the sides to take out any rattles, now it looks factory clean and is plenty strong. The face looks factory and is a good match, but again a little fitting and common sense install skills are required. 08' TRD Tacoma and Apline INE-928HD.
Pros: Looks factory, good finish.
Cons: Bad brackets and clips, best results require reuse of factory metal brackets and clips
Wondered about how well a double DIN would look in the Taco. No worries at all. Looks as good as stock with the fit and dropped right in.
Pros: The best part was probably the two piece fitment. Made it easy to put the receiver in solid, then follow up with the trim piece along with the clock/hazard install.
Cons: The clock/hazard install area wasn't as good a fit as the rest. Works, but looks just a little off (probably no one else will notice, but I do).
Would have liked a better quality piece! Visible blemishes
Kit came with everything need in good time, didn't fit that great though
Pros: Shipping time, easy install, packaged well
Cons: Does not fit that great, clips that hold it in popped out on bumps. Had to push it back in every so often
Really not impressed with this product at all. I purchased it to mount my Pioneer AVH-4100NEX and although it does the job, it does it very poorly. The mounting brackets are plastic and very flimsy. The radio bounces around in the dash with any little bump in the road and forget going off-road unless you take your radio out before hand. The clips that come with the dash kit area also low quality and have already worn out after having to remove them a few times to try and fix the mounting issues with the brackets. I am really surprised that this is the only real option for Tacoma owners with the black dash scheme. I am just going to have to look for an alternative option, even if it means customizing something. The current setup just will not work
Pros: Texture of the kit looks nice.
Cons: Mounts are too flimsy to be of any use. Clips are useless so try to keep the OEM ones. Only 2 mounting points with the new brackets vs the 4 that are used with the OEM brackets.
I was a bit let down with this kit. First of all, there were pieces missing (mounting screws and dash clips). Luckily I was able to pick up a pack of screws at a local big hardware store and I pulled the dash clips off my factory panel to make it work. I will say Crutchfield was ready to send me a new kit no questions asked but I already had everything torn apart and didn't want to go that route if at all possible. Secondly, the panel and trim pieces feel flimsy compared to the factory panel. Since they are not as stout, it is hard to get everything snapped into place, the pieces want to flex and try to pop out. I know there aren't many options out there but it just seems this could easily be made more similar to the factory pieces. Overall it works and I am generally happy with it but it could be better.
Overall the kit did well. The side mounting brackets are a little flimsy, but once the unit is back in the truck, it is ok. It was very easy to switch over the OEM clock and flasher unit to the Metra bezel. Actually, it is easier to put that bar into the Metra bezel than take it out of the stock bezel. You get new clips for the Metra bezel and that was nice or you can reuse your old ones. It looks great in the dash. I had the stock gray bezel and switched to the black bezel and it really breaks up all the gray/silver in the middle of the dash.
Pros: Texture on bezel looks great with the OEM materials around it. Easy install and looks great when all done.
Cons: Side mounting brackets are a little flimsy, but once the unit is installed back into the dash, it firms up.
looks good and does the job
Pros: looks, ease of install
It fits okay I guess
Pros: Fits okay
Cons: Doesn't quite fit right
After getting this installed, the stereo moved around in the mount due to the lack of strength of the plastic brackets. The factory stereo that came out used steel brackets. While the new face plate matched my truck's factory interior quite nice, the face plate only had 4 clips to the factory's 5 and do not stay in place should you be driving down a bumpy road. Combine that with the flimsy plastic brackets and you have a very cheap, yet good looking, installation. I called to technical support to see if maybe I had simply gone the cheap route and wanted to buy metal stereo mounts. Nope, only plastic are available.
Pros: Looks good sitting in the driveway.
Cons: -Plastic stereo mounts have no structural integrity. -Face plate has one less mounting clip and will not stay secure. -The stereo adapter will not stay secure in the face place because all of it is easily jarred out of place. -All of this looks good, but it can't handle normal driving and the stereo unit moves easily from what should be a fixed position.
It did the job. Fits perfect. I just hope the plastic support holds up since the OEM it replaced was metal.
Pros: Exact fit
Cons: Plastic support.
Excellent dash kit
Pros: Really nice kit , easy to install
Cons: Only 6 screws of one type & 6 of another, it takes 8 per install
I'm not sure if there is a better bracket out there to replace the factory one, but this one is not high quality. The flasher and clock don't sit quite the same, the pattern on the plastic isn't perfectly even, and it seems a bit flimsy. That said, it did install easily and sits almost perfect. I was worried that it would bounce out of place because the mounts are plastic and the clips didn't feel secure. However, after two hours of off roading everything is still in order.
Pros: No issue with bracket coming out.
Cons: Not the same quality as Toyota.
Pros: Ease of installation
Kit is ok, mounting hole for hazard button, airbag light and stock clock was to small needs to be trimmed for better fur
Just like the factory bezel. It is fragile so be gentle.
Pros: Looks stock and fits perfectly.
Cons: Fragile. I was scared to break
Looks fantastic after install, just like it was factory!!
Pros: Easy install, looks great
easy to install
Pros: fit like factory
Looks nice. Matches dash. Didn't fit perfectly snug along the top though. Not sure if it's the plastic brackets, head unit, or the panel. It's ok though. Nothing too noticeable. If you are OCD about that look, and perfect fit, then not sure if I can recommend it.
Pros: Nice look/finish. Easy install.
Cons: Didn't fit perfectly
Replacement dash piece looks great and would appear to have been the factory option.
Pros: Replacement dash piece looks great and would appear to have been the factory option.
Really nice Dash kit, Comes with everything you need
Pros: Looks awesome Great price Includes all mounting pieces / hardware
Going through the assembly, the product just seemed cheap, the mounts did not include screws that were long enough to use with the Pioneer head unit I installed, had to go collect screws that were 5mm longer to feel like they would stay secure while in my dash. Installation took some time to keep the mounting screws loose so that you can align the unit to your dash and get everything to align. The main dash cover matches the original very well but doesn't look to be flush as the factory cover looked.
Pros: Looks like stock, cost effective.
Cons: screws too short, mounting it all together in the dash took some time and patience.
This is a good looking kit, easy to install, wish the flasher button fit a little better but good fit overall. I recommend this kit for double din units.
Pros: Looks good, feels cheap but looks good.
Cons: Flasher button fits kinda tight.
I like that the mounting bracket resembles the factory Toyota mounts for my Truck. It would be better if the brackets were METAL and not plastic that mount to the side.
Pros: Attaches just about like the factory brackets, It is fairly easy to mount.
Cons: Factory brackets have round holes to bolt to the Dash with , This has Plastic open ended slots that require flat washers over the top.
I got the Metra dash kit with the receiver that i purchased and the install was fairly straight forward. The metra kit has the same surface finish as the stock tacoma receiver, but that's its only good attribute. The silver dash kit is just the black dash kit painted silver. The paint job is sloppy and there is a lot of overspray on the back of the panel (its hidden from view but its poor craftsmanship). The top of the panel only has 2 tabs where the dash clips attach (stock receiver has 3) and the length of the tabs doesnt match the dimension on the clip. The length dimension mismatch causes a loose fit and the loose fit causes the entire panel to vibrate. The buzzing sound created by the poor fit is the reason that i purchased the Scosche kit. The length of the tabs also does not allow the dash kit to sit flush with the dash itself and makes the entire kit look like it doesnt belong.
Pros: Surface finish matches stock receiver. Easy install
Cons: poor quality, attachment points dont match stock, bad fit allows dash kit to vibrate and buzz
Surprisingly good fit and finish. Matches the factory panels inconspicuously.
I had expected to NOT like this, and to have to order the Scosche (spelling?) mounting kit from another source. Reviews online had me expecting a Metra kit that would not be acceptable. The kit I got has the textured silvery finish, and it matches the rest of my textured dash very nicely. Nobody has suspected that it is NOT a factory component. I did think the way the side plates (bolted to the headunit) just loosely "snap" into the mounting frame is a bit cheesey, but so far it is holding the head unit in place.
Pros: - matches textured dash finish MUCH more closely than I expected - fairly simple to install
Cons: - mounting system could be a bit more robust.
Brackets are flimsy plastic at best. Worst part are the clips that can't stay on and fall into the dash. WHY? Who was in charge of making the clips for this unit? Dumb, just dumb.
Pros: Decent look when completed.
Cons: Clips. Flimsy plastic.
OK for the price I paid (free with receiver), acceptable color match, fits dash opening fairly well after some tweaking. Next time I'll buy the Scosche brand adapter.
Cons: Fair color match, ok (but not great) fit. Clock & Flasher Switch fit marginally well in cutout. I guess you get what you pay for
I had no problems with this kit. I bought a double din radio and it fit right in my Tacoma. It is sturdy. I did have to take a razor knife and widen the hazard light opening a little.
Pros: Looks good. Fits nicely. Easy to use.
Cons: It is hard to get the clock out of the Toyota dash. Just be ready to fiddle. I would add that to any install kit for a Tacoma.
Looks great!! Put a touchscreen in my 09 tacoma and this Dash kit looks freaking awesome the other head units I've put into vehicles havnt looked oem but this for sure does!!!!
Pros: Looks great!!!
Cons: Im really anal and need everything perfect on my vehicles and this is really close but it's missing a prong on the top and it clamps done good. But it still leaves a little lip i fixed the problem with superglue and a little fist bump
perfect matched up with the blaupunkt n220 bolt and snap right in good fit no modification
Pros: clean fit
Cons: Stereo mounting brackets are plastic (sort of flimsy). There is a gap around the finishing piece that surrounds the stereo face and the actual stereo face. Overall just feels cheap. Not the quality you would expect from Crutchfield.
For the free with purchase price its a steal. The fit requires a bit of adjustment. Overall its a near perfect match to the factory piece. It likes to rattle after its all settled in after a week. Nothing a person with a little imagination cant fix.
Pros: Great match to factory dash
Cons: Loose fitting parts.
This works fine once up figure it out.
Pros: Works and fits fine in a 2010 tocoma
Cons: Instruction leave a lot to be desired when removing the factory clock and hazard button on a Toyota tocoma. Thankfully there was a video on u tube about this.
Crutchfield really knows how to make sure you get the correct equipment for installation.
Pros: perfect for installing receiver; matched original dash perfectly
Perfect fit that goes in easy. It would be helpful if the instructions clarified which pieces were needed for the job at hand as more are included in the package than will be used. Also, the black color is a shade lighter than the original black in my 2006 Tacoma.
Pros: Fit and ease of installation
Cons: Color not a perfect match (but very close)
Matches my stock kit and has a great tight fit
Pros: Easy installation
It fits like a glove.
Perfect match for my stock kit.
Pros: Matched my dash perfect
I'm mixed on my review of this product. Once installed, it looks great. The panel matches the rest of the interior perfectly as far as I can tell. I do have a couple of issues with it, however. The brackets that screw on to the receiver are flimsy plastic. They really should be metal. It seems sturdy once you get it fully installed, but a few times I was worried about breaking the plastic. My second issue is with the dash panel binding/interfering with the operation of the motorized display of my Pioneer AVH-4000NEX. When I first installed it, the screen would not tilt out the way it's supposed to. When I removed the outside dash panel, it worked fine, so I figured it was binding somewhere, most likely along the top edge, so I planned to trim a bit of plastic along the top of the opening. A week later, the screen is now working without me making any mods to the dash kit. The weather has warmed up here considerably since I installed, so I'm thinking the plastic probably expanded enough to allow the screen to operate as it should. It still seems a bit tight at the top, so I plan to still do some trimming. For these reasons, I'm only giving this product 3 stars.
Pros: Looks great, matches stock interior perfectly
Cons: Brackets are flimsy plastic May interfere with operation of receivers with motorized display
Very nice fit
Pros: Completely replaced old peice and looks like factory would look.
Cons: Had some difficulty dismantling the old peice for clock and hazard display. But nothing relating to the product.
Good job of matching color and texture of exposed parts but that is it. Plastic brackets are as flimsy as any i have seen in 20 years. The kit is designed so the filler panel attaches to the plastic brackets via friction fit. Do NOT use these trash brackets. Use the factory steel brackets and attach the filler panel with adhesive. Shame on Crutchfield for selling this. I have come to expect far better. But using my plan and factory brackets (which are flawless on my AVH-X2600BT) you can have a nice, solid install with factory fit and finish nearly.
Pros: Color/texture matching
Cons: Brackets are worthless to anyone with standards
Came as a kit
Pros: Great price
It works, and it looks decent. Unfortunately the bezel is a little larger than I would have liked, but unlike the pictures it is silver/gray to match. I would have appreciated a more flush fitting look tilting the stereo to be flat on the front like the factory unit. Also the brakets that hold the radio in place are plastic unlike the stock metal ones, so they feel a little flimsy.
Tight fit in my 05 tacoma. Just make sure you get the mounting tabs lined up even when you screw them to the radio. Had to do some adjusting but all and all went pretty quick and is pretty flush with everything.
Pros: Looks almost like stock
Cons: Mounting brackets when you blot it up could give you a lilttle bit more wiggle room to adjust to fit better.
This grey dash kits look great in my Tacoma. The colors match and the fit is correct.
Pros: Color, fit, textured finish.
Matches the truck interior perfectly, but not a snug fit. Leaves a small gap around the head unit, not terrible, but is noticeable
Pros: Matches well with interior
Cons: Not a snug fit
This feature looks like the OEM front cover. Great!!!
Used on 2010 Toyota Tacoma and made the new system look like it came from the factory.
Pros: Looks like Toyota installed it.
Pros: Looks good. Not hard to use
Cons: It's not 100% flush. It didn't have screws that fit the deck
This dash kit has a textured silver finish that matches the surface of the AC control panel just below it. It fits well and looks great.
Pros: Great fit and finish
The dash kit for my 2005 Tacoma has a poor fit. I should not expect much for a free kit with the purchase, but I have had much better luck with items delivered from Crutchfield in the past. The dash cover does not snap in tight and the head unit is set back in just a little too far. I am going to have to alter this unit completely for a good fit. At the moment it is in, but only ok.
Pros: Looks nice, much like the factory in finish and design.
Cons: Poor fit. must be altered for a good clean fit and finish.
Metra is the way to go for kits.
The metra fit is supposed to be superb.... The instructions show 4 screws on both sides to hold radio to bracket. However! They only supplied 6, 2 less than needed... Also, the radio is misaligned and keeps slipping down and to the side and the bracket will keep rattling. My advice is, make the pictures larger so people can see where the screws are to go.
Matched my factory dash perfectly. Was easy to install
Pros: Easy to install and matches perfectly
Easy to install. Same color as dash.
Pros: Same color as dash. Easy to install
Matches dash well. Needed to use some factory retaining clips as the ones provided would not stay on this item. A little loose fit (gap) at the top of the dash, but nothing to bad. Would not allow me to reuse factory metal deck mounts and had to use the supplies plastic ones.
Pros: Matches dash well.
Cons: Needed to use some factory retaining clips as the ones provided would not stay on this item. A little loose fit (gap) at the top of the dash, but nothing to bad. Would not allow me to reuse factory metal deck mounts and had to use the supplies plastic ones.
Fit was not perfect. Edges just dont sit the way an oem dash would. Not terrible, i just notice little stuff like that.
Cons: Fit not perfect
Looks like original Adapter plate makes it hard to control volume.
Got it for free!!! It works. Its not as clean of a fit as the factory.
Pros: Easy to use and it fits ok....matches the stock bracket pretty good in appearance.
Cons: Fit is ok, but not factory.
Below standard kit. Pattern matches dash well but silver is too bright, therefore the color does not match. Installed Kenwood DDX-7701HD and it sits crooked inside the kit. Also, the Hazard Light Switch does not fit into place well and if the cover pops out (which it does when driving over speed bumps) when you push it back into place the Hazard Lights come on. Had to use the factory retainer clips because the clips provided in kit would not hold it into place. Would recommend Crutchfield look for a different supplier for a dash kit for a Toyota Tacoma.
Pros: Exact Dash Pattern Texture
Cons: Does not stay secured in the dash (Pops out of dash to easily). Does not hold radio straight in dash. (After an hour of adjusting and removing the radio; still crooked) Does not Hold Hazard Switch into place correctly.
This was a really easy switch and it looks so good
Pros: simple and easy
Great fit - looks like factory!!
Pros: Looks like factory when competed!! Overall - very nice product and highly recommend when going to double din radio.
Cons: Plastic installation brackets instead of factory metal ones.
The product does what it is supposed to do, and the color and finish is an exact match to the dash. My wife says it looks great. I disagree. The bracket that goes around the radio is loose, and does not fit flush to the trim. 80% of the people who buy this will be happy with it, I am a perfectionist, and am not happy with it. However, being it is the only option for my truck, I have no other choice.
The exterior looks good but as to security this is a cheap version. Factory brackets are metal and this comes with plastic. If a thief wanted to steal this it would be easy to rip the head unit out with ones hands I suppose for free you get what you get...
Pros: Looks nice
Cons: Cheap plastic
Installed a Pioneer FH-X700BT last week in my 06 Tacoma and they sent this as the install kit. The color is pretty close to the stock interior and it sits nice and flush with the rest of the dashboard. Used the clips from the stock mount as the ones supplied didn't seem to grab as tight allowing it to not sit as flush with the dash. Would have been a real easy install if everything lined up right but after trying many different options I still was not able to get the bottom bolts in that hold the bracket to the dash. It seems like it needs to down and back 3/4" to be able to not put stress on the right side of the receiver because it pops out from the hold down bracket allowing the receiver to almost fall out. Going to mess with a bit more this weekend when I install the rear access door speakers since the Tacoma dash is so easy to take apart again. I don't know if its the receiver or this mount but I will try again to get to fit a bit better but it works fine for now.
Pros: Color and look match pretty good and it looks almost stock Hazard, Clock and Passenger Airbag unit fit in great without any issues Comes with Crutchfield purchase and better than the other options out there for looks
Cons: See review for installing trouble Feels cheap
Worked extremely dell and fit perfectly.
The equipment looks very good. It matches the overall factory scheme of the vehicle, and the bumped texture really adds a nice finishing touch. My only con with this piece is that, even with proper installation, it rattles slightly at times. It's almost as if the kit doesn't fit into the sockets fully making it feel a bit insecure. I don't think that it would come off with regular use, but it didn't "snap" in as tightly as I would've liked.
Pros: Nice looking, factory themed, easy install
Cons: Slightly odd sizing makes the faceplate feel a bit insecure.
Fits perfectly in the dash but the color is off
Pros: - Great fit - Hole sizes are perfect - Includes factory replacement clips
Cons: - The color is off. The factory dash is grey and this part is more silver
I have been using Metra dash kits for some time now and have been pleased with them. This is my third one I have gotten with my purchase. I own a 2005 tacoma and was able to use my old Metra kit which held my JVC single din for 9 years. The only thing that I used from the new kit were the round headed screws,plastic brackets and the trim to fill in the gap around my radio. I was able to do this because it the same specs and style from my kit from 9yrs ago. I didn't not have to use factory yellow plastic clips because the white ones fitted snugly and my plastic brackets did not break when I tightened my screws down. The textured surface was a close match to my dashboard . For those who complained about this, please remember that your interior has faded some since you owned your vehicle and your kit color will be off. Imagine having your car for a couple years and painting a small spot with fresh paint ? That fresh spot will stick out unless you spray the entire car over. In time, it will match you existing interior and no one will notice. My radio is solidly in with no squeaks,rattles or gaps .
Pros: Perfect fit ... at least for MY vehicle. Nice clean look as though a professional did it.
Cons: None to say. Just use the round headed screws when securing brackets to the radio. They seem a little longer compared to the flat headed ones and don't seem to crack the bracket s like others have complained about.
Perfect fit and match to my dash. Can't believe how well the texture and color match, look like a factory piece.
Pros: Fit, color, texture
It looks just like factory plastic, but the brackets are too cheap and the plastic itself wasnt flush it was made sort of twisted. was difficult to make fit.
this was put in my 2008 Tacoma and it fit perfectly. Easy installation
Pros: fits the way it should
Fit perfectly in my Toyota Tacoma
Pros: Matches the factory dashboard
Not bad I wish it was available without texture but I realize the OEM piece has texture I just prefer without also the hazard button doesn't fit as well as the scosche kit but I think this is still probably the best one out there currently and if you are buying this one this is the place to do it
Pros: Appears well made
Cons: Hazard cut out could fit better
Fit really well, looks almost factory
Pros: Easy to install
Cons: Clips seemed kind of cheap, I used the clips from the factory kit
Fit great and look like factory
I bought this product to mount a Pioneer AVH 4200 in my Tacoma. When I first looked at the parts and especially when I put them on the radio I didn't like the plastic mounts. The ones on the stock radio were metal and I thought these were going to be flimsy. It turned out they were still very solid once mounted. It was easier to set this up with the new radio than removing the parts from the old faceplate.
Pros: Perfect fit and factory look.
Upgraded my '05 Tacoma. Wanted Blue Tooth, USB, and a way to have XM. The staff's help was awesome. Took me just a few hours to replace my factory CD/am fm unit with a Pioneer. Rockin'
Pros: Price, Look, Fit, Compatabilty
Cons: Only had a few issues with the directions, but the tech staff cleared it right up.
Fit like a glove. Looks like the radio came from the factory. I am completely satisfied with how it looks.
Pros: Matched the dash perfectly.
Perfect fit, looks like original install great job!
Pros: Fit great, looks like it was made by Toyota. Good instructions.
Cons: I don't have any!
Easy to install and looks almost factory.
Pros: Easy to install.
Cons: Clips to hold the unit in place seem a bit cheap. I used the ones from the original radio
Snapped right in... Looks OEM!
Pros: No modifications needed, it went right in. It looks like it came straight from the factory.
Did not like the color or fitment at all. The silver color was at least 5 shades off. Every time I would tighten mount bolts, the bezel would pop loose. Finally got it to stay, but while driving hit small bump, it pop out again. I know it was free with purchase, I would rather pay for a better quality dash kit.
Pros: It was free with purchase!
Cons: Color shade is way off. Bezel keeps popping off
Great product. Looks factory. Fit was perfect. Installation was easy. Arrived to my home very quick.
Pros: Price. Fit. Factory look.
Looks like it was installed at the factory!!!! High quality and a perfect fit!
Works great & looks great. Only issue is mounting the hazard button and clock. No guide so you Need to make sure you align straight or the hazard button will get caught. I had to deduct one star for that. But I would still recommend this product.
Pros: Looks great & works great
Cons: No alignment guide when mounting hazard button and clock.
It was included with the radio!
Pros: It fits
Faceplate looks fine, however, the supplied brackets were incredibly thin flimsy plastic, barely strong enough to survive pushing the unit back into the dash, let alone support it for off roading. Was able to use the metal brackets off the factory unit with minor modification.
Pros: Fits well.
Cons: Inadequate brackets
Would not recommend for the pioneer avh-p8400 or similar.
Pros: Looks like OEM equipment.
Cons: Just doesn't work with AVH-P8400 Head unit.
Looks like factory - Crutchfield is awesome!!
After some modifications, the kit worked okay. It is a much looser fit than the factory, or even my previous kit. The kit does not have the top center pin which would allow it to be more secure and snug
This is my second in-dash receiver kit from Crutchfield, and these things just keep getting better and better. Installation was simple and quick, and the tutorial was exactly as I needed it to be.
Pros: Quick, Easy, Perfect Fit
Cons: Have to do the work yourself.
Great dash kit. Easy to install in my 2006 Tacoma
Looks like a replacement piece to me. My kit came in incomplete, but Crutchfield's customer service was awesome, and resolved the issue
Pros: looks just OK
Cons: Looks like a replacement part, fits just OK, the section that houses the clock and emergency flasher button looks cheap
Overall ok trim kit, instructions very confusing took some trial and error to get it together.
Pros: Really matches my interior on my truck, looks great
Cons: Instructions very confusing, very unclear
Very happy with the in dash receiver kit from crutchfield for my toyota tacoma,good match to the original textured look and fit.
Pros: looks like the factory one
It was easy to instal. Use the clips you already have and super glue the small piece you screw to the main faceplate to keep it from rattling. Don't remove it after install. One of my screws would not go back in and it rattles pretty bad now. Very good product you get for free with the radio.
Pros: fit perfect, matched colors of my interior
Pros: Perfect Fit, Matches interior, Easy install.
Cons: none so far
Exact fit with easy instruction
The radio went in simply, but this dash kit wasn't quite as nice. Had to take it off to make a change in Bluetooth wire location. The little plastic tabs that held the top of the faceplate in place popped off and fell into the unknown depths of the dash. Used the ones on the original as replacements, but the top would never stay fully in place again. It does now, but I had to make little shims out of wood to drive in the gaps on the side of the faceplate. They don't look bad, but I'd prefer not to have to do something like that. So, be warned, you may have problems if you have to take the plate off for a reason. Supergluing the little tabs onto the faceplate before installing might be a good idea.
Great product that fit perfectly with my new 2DIN radio. Matched the original dash to a T. I would definitely recommend to anyone looking to upgrade their old Tacoma factory radio to a new DVD style MP3 bluetooth radio. Also, the best price I found anywhere, competition was almost double what Crutchfield is charging!
Pros: Fits great, looks great, gets the job done!
Cons: A little tough to install on your own, just be careful and take your time so nothing breaks.
Was surprised how much to kit looks like the OEM dash. The new kit is tight and aligned to achieve an OEM look.
Pros: OEM look and feel. Tight fit with no squeaks or rattles.
Cons: Kit is made of plastic with some give but be careful not to break.
This kit was easy to install, instructions were perfect and it looks exactly like the factory piece I took out. Perfect match!
Pros: Exact factory match, easy install, great step-by-step instructions
Perfect fit, easy installation,
Pros: Look like the factory dash
it was recomended [ shawn Feb 02, 2017 ]
matches my dash color [ RICHARD Dec 30, 2016 ]
It looks like the factory except its black. [ Anthony Dec 17, 2016 ]
Tacoma faceplate is required and this is black to match the dash [ Eric Dec 09, 2016 ]
need to complete install [ Franklin Dec 02, 2016 ]
included free [ Glenvall Oct 02, 2016 ]
The head unit because you ended the sale of the 4100nex ten minutes before I was ready to buy it yesterday, the camera because I'm led to be leave the cmos camera's have fish eye effect and the whole mess from Crutchfield because I owe Brice and others for their help. And I might need a bit more! Don Bryce's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=75 [ Earl D. Aug 17, 2016 ]
Heard they fit well. [ William Aug 03, 2016 ]
I like the look of the black dash kit, it will contrast well against the stock gray. [ Geraldo Aug 02, 2016 ]
Looks like it fits my tacoma [ Doug Jul 10, 2016 ]
dash kits make the install have a factory oem finished look. a must have. [ EDWIN Jul 04, 2016 ]
Looked modern [ Louis Jun 02, 2016 ]
Great fitment [ james May 30, 2016 ]
Because you sent the one for a single din the first time [ Scott May 20, 2016 ]
So my new car stereo won't just be flopping around loose in my dash, silly [ Bruce M. May 05, 2016 ]
gives a professional finished look to the install. [ David Apr 03, 2016 ]
Cause it just makes everything look good in the cab of my truck [ TOMMY Feb 04, 2016 ]
This is a good solid unit at a good price. [ Allan S. Dec 28, 2015 ]
It was recommended by Crutchfield [ Thomas Dec 26, 2015 ]
all in one stop for what I was looking for [ joseph Dec 10, 2015 ]
I have grey interior and a grey dash [ Ryan Feb 17, 2017 ]
My Tacoma comes with a factory review camera with the screen in the rear view mirror, about 1 1/2 X 1 1/2 inch screen way to small. This set up will give me a bigger screen, and the BT options that I'd like to have for my phone. [ Charley Feb 12, 2017 ]
offered with product. Assumed it was the best option for my vehicle [ David Feb 10, 2017 ]
No other choice. [ R Feb 09, 2017 ]
Made for a seamless good looking installation. [ Otto Jan 21, 2017 ]
Factory correct item [ Ricky Jan 01, 2017 ]
Because my dashboard is grey and I want the installation to look professional [ Daniel Dec 28, 2016 ]
Suggest in purchase and to match current dash trim [ Carlos Dec 19, 2016 ]
It is a must [ Saulo Dec 19, 2016 ]
fits my truck [ Ed Dec 13, 2016 ]
My car dash is grey [ John Nov 14, 2016 ]
This kit appears to be close to the appearance of the factory radio unit in my 2009 Tacoma. [ James K. Nov 11, 2016 ]
matches current dash color [ Diep Oct 07, 2016 ]
COLOR OF INTERIOR [ HOP`S PC&CB Oct 03, 2016 ]
The gray color and texture matches the factory finish better [ Benjamin Sep 26, 2016 ]
matches dash [ evelyn Sep 24, 2016 ]
Perfect fit for my truck. [ JIM Sep 20, 2016 ]
kit it calls for [ greg Sep 19, 2016 ]
Need it to keep color matching [ GENARO Sep 02, 2016 ]
cause it fits my truck [ jordan Aug 12, 2016 ]
I needed this to install my stereo and my interior is gray. [ Brian Aug 02, 2016 ]
Specific for my truck - looks good - hope quality is the same [ Real Jul 22, 2016 ]
This should be a close match to my factory dash bezel. [ Gregory Jul 09, 2016 ]
This will replace the current faceplate with the same type features and color. [ PERRY Jul 07, 2016 ]
matches the stock dash nicely [ Robert Jul 06, 2016 ]
Needed it for.installation [ S Jul 05, 2016 ]
It fits on my dash like custom made. [ Lucas Jun 22, 2016 ]
to match my interior [ Robert Jun 05, 2016 ]
Color for dash custom look [ John Jun 03, 2016 ]
My dash is grey. [ Louis May 07, 2016 ]
Price bets all [ Patrick May 06, 2016 ]
Because my dash is gray. This should match. [ Allen Apr 30, 2016 ]
It matches the truck [ WK Apr 17, 2016 ]
compatible Tacoma 2010 .4door trd [ manuel Apr 09, 2016 ]
because its muches my dash board color. [ MAVIN A. Apr 03, 2016 ]
Just what I need for my vehicle [ James Mar 24, 2016 ]
It's the part I needed to install my radio and it's the right color [ Kinnard Mar 22, 2016 ]
MATCHES MY DASH [ CIARA Mar 09, 2016 ]
Matches existing trim on my 2006 Tacoma SR5 Double Cab, [ Edward Feb 10, 2016 ]
good product and price was good [ Darrin Jan 29, 2016 ]
REQUIRED FOR DOUBLE DIN HEADUNIT INSTAL [ Peter Jan 26, 2016 ]
Needed it for the radio install [ Mark Dec 26, 2015 ]
Matches vehicle dash very well. [ Randall Dec 12, 2015 ]
Saw a youtube video that included an install with this kit. Looked clean. [ G Dec 07, 2015 ]
This is double DIN kit, so it will be roughly 7" x 4". The receivers that will fit will depend largely on your vehicle. For details on installation please contact an Advisor by phone or online chat. They will be able to pull up your vehicle and give you the details on what receivers will fit. [ Jeff Dec 26, 2013 ] Staff
Thanks for your question. Yes it will. It is made for the double din size receiver, installing in 2005-2011 Toyota Tacomas. You can check to see what fits your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on what fits and what you will need for an installation in your vehicle. [ Kenny Apr 16, 2016 ] Staff