Metra 99-9105 In-dash Receiver Kit
2001 Audi S4
Crutchfield Customer Review (What's this?)
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item # 120999105 | MFR # 99-9105
The Metra 99-9105 kit allows you to install a single-DIN (2" tall) or double-DIN (4" tall) radio in your vehicle's dash opening. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this kit is compatible with your vehicle. Warranty: 60 days
Note: Most vehicles will require additional installation parts please identify your vehicle if you haven’t done so. You can also call an Advisor for more information.
Average Customer Review(s):
Product was very easy to install and setup
Pros: Product worked very wells easy to install and very good looking.
Cons: The additional piece on the top where the hazards are does not fit right after installation but after some moving it fits fine
I used it for a double DIN install 2001 Audi a4, fit perfectly and looks great
Pros: fits perfectly
This dash Kit was installed into a 2001 Audi S4. Kit works well for the installation of the double din Kenwood receiver that I had. What I was not a huge fan of is that it is only held into place by two plastic clips at the top. To access these clips for removal or installation of additional items (Amp and reverse camera) you need to pry them back. Which I have found can only be done with the top wood/black trim around the fog light / Hazard / cup holder area. Luckily i have it removed to replace the cup holder. Trim does look pretty good!
Pros: Clean looking Easy To istall
Cons: Difficult to remove to modifications or adjustments.
awesome kit !!
Perfect pack and fast shipping
Pros: Packing was great really secure
In general the product worked. I used it for a double din, so I had to modify it for it to work. Then what I didn't like was a little plastic sticking out that I had to file down so it wouldn't be noticeable. Someone that is not handy and using this for a double din should not get it.
The plastic scratches really easily and doesn't fit flush when put together.
Cons: Fit. Durability. Requires cutting or filing because of the way the mold is made
I've purchased this product 3 times. The first 2 times I used it as the basis for very custom installations (Android tablet and car PC installations). This 3rd time, I'm using it as it was intended. In all cases, I was very impressed by the quality. This kit is versatile, complete and very sturdy. If there's anything to complain about, it's that the surface texture doesn't quite match the OEM plastics in the dash, but it's not something I ever notice now that it's installed. For the money, it's hard to go wrong.
Pros: Great price, very complete, good quality, good fit
Cons: Surface texture isn't a great match to the rest of the interior
Perfect fit for my car. I was concerned it wouldn't work for my Audi, but it popped right in and looks great.
Pros: perfect fit
Cons: would be very hard to remove once installed
kit allowed for easy and clean install of an aftermarket radio in my audi. Highly recommend this kit. great price for a solid product.
i shaved all four corners to make it work also the radio isn't flush in there but it does fit just needs some work to get it in there
Pros: it fits
Cons: it need some work to make it fit flush and clean
The only thing I do not like about this is the small frame that goes around the actual "unit" is always loose, if you bondo it from the inside fits much better. Best one out there for this model car though, 3rd time buying it.
Pros: Best one out.
Cons: Poor fitment
It worked fine but it's not as straight forward as you'd think it would be. First you will not be using the metal radio cage that comes with your radio. You will be using the plastic brackets that come with the kit. Next you need a cutting tool to cut out the center bar if you are using it in the DD configuration. The instructions suggest using a box cutter, you'd probably end up cutting yourself or mangling the face plate before you cut through that plastic with a box cutter. Once you cut the center bar out you will have to also cut off the plastic tabs it leaves behind. You'll see it once you get it. Don't follow the instructions when you try to put the brackets on the face plate either, you'll just get frustrated and through the whole thing in the trash. Put one bracket on, slide the head unit in per the instructions leaving enough space to slide the second bracket into place then snapping it to the face plate. I promise it's easier that way. Then using the bolts from the head unit secure the brackets to the site of the head unit. Then finish the install.
Pros: It's works. Looks nice in the car.
Cons: Instructions are a little to generic for how you really need to put it other.
Fit the dash great except very top...had to make slight change to back of plastic to make it fit.
I have no complaints about the Metra 99-9105 Kit! It fit my 2000 Audi S4 perfectly without tools and I am now happily listening to my music! The face and holder fit flush with radio set back only a tiny bit in single-Din config and radio set back a bit in double-din config but it looks stock. I had a piece of black "hazard" trim from an A4 (S4 comes in wood trim) and I used that to make it look even more stock. Great product overall and no gaps!
Pros: Fitment, Look, Build Quality, Design, Instructions, Ease of Installation
Cons: Beauty ring not flush in single-din configuration.
Product was a perfect fit into my Facelift 2000 Audi A4 B5 1.8tqm! The bezel makes it look really sleek, no gap! Using a Pioneer AVIC-D3
Pros: Easy to install
Cons: For a double din, the plastic has to be broken, luckily it was designed to do that!
This kit fits perfect. I like that it comes with everything you need, plus some other pieces, should you change your DIN size later down the road. I had a single DIN headunit laying around that I installed, but will be installing a double DIN nav unit in the future, and I won't have to buy a different kit. That is nice. Plus Metra kits are always nice quality and are a good match to the factory plastics they abut to.
Pros: Perfect fit, everything you need and then some, quality plastic
Fits my b5 s4 perfect!!
It has a very good quality of the plastic being used. It's not the flimsy ones that you find for the same price. Love the way the car looks like now.
Pros: Thick plastic Good finish look
As stated in title
Great price, eventually it works fine, but we had to break one to learn how to fit one. I do not want to think about having to remove it.
Pros: Super price. technically it does fit.
Cons: hard to work with
Fit okay. As others have said it doesn't clip into the dash very easy. I question how I remove it if I want to add to the system or need to pull the head unit for service. I emailed Metra with this question. I told them the car that it was ordered for and their reply was this, " what's the part number?".
The kit ended up looking good but the two upper clips that engage into the dash frame are not designed well. The cilps have a cored out section on the clip head so when you go to push them in, the two small walls of the cored area deform. This causes the clip to not flex easy and are almost impossible to push in fully. I alsmost broke the clips before filing down the clip head contact area a few times to remove the deformed area before finally getting them in. Took me an extra hour to do all this while trying to not break the plastic clips. I would recommend to the manufacturer to reverse the cored area or add another wall inside the cored area to increase the engaging surface area which will reduce deforming. FYI-I design plastic parts for a living.
Pros: Matches dash
Cons: Poor design on engagement clips.
Slightly too big for the space and doesn't fit flush with the rest of the console. Going to have to try another one.
Pros: Easy to install
Verry cheaply mad was not happy. The one pice was so this it broke installing it
Cons: Not made thick enuff
Perfect fit, outstanding finish. Easily accommodates double DIN unit. Really looks great in the car. Outstanding solution for Audis.
I was not really expecting much from this kit. I was intending on sanding it down and spraying it with plastidip to match the trim on the center console. When it arrived i test fit it and it looked OEM. The holding clips on the top were a little tight, but with a little effort, it fits perfect.
I have to start off by saying I'm a little upset at how long it took Crutchfield to carry this, but am happy they finally do. Its really your basic dash kit, but one that took a while (before Crutchfield carried it) to find. If you purchase this kit, just try and get all the wiring and everything don in one shot, because the plastic clips do break fairly easily. The kit looks great with my Alpine CVA-1004 and Alpine DVA-7996, and with 2 little metal toggles switches mounted on the left side to allow me to view the screen while driving.
want to keep install clean [ Scott Dec 10, 2016 ]
Clean oem look. [ MARLON T Jul 08, 2016 ]
part of the accessories kit [ Mark Apr 17, 2016 ]