HDMI PoE Extender: This HDMI PoE extender
(CS-HDC5EXTSRPOE) includes a transmitter unit (TX) and a receiver unit (RX),
working as a pair. It allows for transmission and extension of uncompressed
full-HD 1080p@60Hz HDMI signal via CAT6/6A/7 network cable. The transmission
distance can be up to 164' (50 meters) with zero latency.
HDMI 1.4a: The HDMI PoE extender (CS-HDC5EXTSRPOE) is
equipped with HDMI 1.4a jacks that are HDCP 1.2a compatible. There is HDMI 1.4a
input and output on the transmitter, as well as a HDMI 1.4a output on the
receiver. These HDMI 1.4a jacks support 480i@60Hz, 480p@60Hz, 576i@50Hz,
576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, and 3D 1080p@50/60Hz.
EDID Switch: The HDMI PoE extender includes an EDID
switch (3 dip-switches) on the transmitter for helping to set a needed HDMI
signal format. See the User Manual for EDID switch instructions.
PoE (Power-Over-Ethernet): The CS-HDC5EXTSRPOE supports
PoE to power the receiver, so you only need to connect the included power supply
to the transmitter. Each unit will power up, as the receiver unit is powered by
the transmitter unit through the connected network cable.
IR Pass-Back: This HDMI extender supports IR pass-back
for remote control source devices. It comes with an IR blaster and IR receiver.
It supports 20-60kHz wide frequency IR remote controls.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.