Skip Navigation

T-Spec V10-RAK10

1/0-gauge amplifier wiring kit — includes 2-channel patch cable

2 Reviews

Item # 120V10RAK1

In Stock

 Ships FREE

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

Chat Email

Overview

Our take on the T-Spec V10-RAK10

This V10-RAK10 amplifier wiring kit from T-Spec helps deliver the power you need to drive your music to the highest level. The kit includes 1/0-gauge power and ground wires, an 18-gauge turn-on lead, a 17-foot stereo patch cable, a fuse holder, and an assortment of hardware useful for your installation. T-Spec makes wiring products that meet all American National Standards Institute (ANSI) and Consumer Electronics Association (CEA) standards for size, strand-count, resistance, and insulation quality. With T-Spec wiring, your amps and speakers will get the energy they need to give you peak performance.

Power up to specification

This V10-RAK10 amplifier wiring kit from T-Spec helps deliver the power you need to drive your music to the highest level. The kit includes 1/0-gauge power and ground wires, an 18-gauge turn-on lead, a 17-foot stereo patch cable, a fuse holder, and an assortment of hardware useful for your installation. T-Spec makes wiring products that meet all American National Standards Institute (ANSI) and Consumer Electronics Association (CEA) standards for size, strand-count, resistance, and insulation quality. With T-Spec wiring, your amps and speakers will get the energy they need to give you peak performance.

Oxygen-free virgin copper

Recycled copper often contains impurities that can impair conductivity, so T-Spec uses only oxygen-free non-recycled virgin copper in all their wire to maximize signal and power flow. The high strand count and special PVC blended jacket give T-Spec wire an extraordinary flexibility, making installation easier. The power and ground wires in this kit each come with a sturdy ring terminal machine-crimped to one end, ensuring a secure contact with your car's battery and chassis ground. T-Spec even pre-installed the fuse holder (with a 250-amp fuse included) inline on the power wire, for your safety and peace of mind.

This wiring kit does not include speaker wire. You will need to purchase that separately, in order to complete your amplifier installation.

Product Highlights:

  • amplifier wiring kit
  • all wires made of oxygen-free non-recycled copper
  • wires meet all ANSI and CEA standards
  • 17 feet of 1/0-gauge matte pearl power cable with ring terminal
  • 3 feet of 1/0-gauge matte gray ground wire with ring terminal
  • 17-foot 2-channel RCA patch cable (double twisted pair for superior noise reduction)
  • 17 feet of 18-gauge blue turn-on lead wire
  • brass mini-ANL fuse holder with 250-amp fuse installed on power wire
  • comes with an assortment of hardware including wire ties, a firewall bushing, and various crimp-on wire terminals
  • warranty: 1 year
  • Our 60-day money-back guarantee

As advertised, the only complaint would be the messy installation of the fuse. Bare wire hanging out of the fuse holder.

Mike, Eau Claire, WI

What's in the Box:

  • 15.5' Length of pearl white 1/0 AWG OFC multi-strand power wire
  • 1.5' Length of pearl white 1/0 AWG OFC multi-strand power wire
  • 3' Length of grey 1/0 AWG OFC multi-strand ground wire
  • 2 Ring terminals (mounted to one end of the 1.5' and 3' 1/0 AWG wires)
  • In-line v12 ANL fuse holder
  • 250A ANL fuse (installed in fuse holder)
  • 17' Length of blue 18 AWG remote turn-on wire
  • 17' Stereo RCA cable
  • Two 1/0 AWG crimp-on spade terminals
  • White spade terminal boot
  • Silver spade terminal boot
  • Red 18 AWG crimp-on spade terminal
  • Red 18 AWG butt connector
  • Firewall bushing for 1/0 AWG wire
  • Eight 5" Wire ties
Reviews

T-Spec V10-RAK10 Reviews

Average Customer Review(s):

(2 Reviews)

Decent

Mike from Eau Claire, WI on 5/3/2017

Crutchfield Customer Review (What's this?)

As advertised, the only complaint would be the messy installation of the fuse. Bare wire hanging out of the fuse holder.

Pros: Had everything I wanted

Cons: Poor wiring of fuse holder

5200 watts!!?

Bob from Beltsville, MD on 9/18/2016

Crutchfield Customer Review (What's this?)

First I was hesitate too buy 0 gauge its quite intimidating. I am running multiple amplifier's that require 4awg. So 1/0 was needed too split the power. It was not hard too run through the firewall, I used a bit off olive oil and it was through easily. Also the material is smooth which make it flexible stuff. It is almost as thick as Rockford Fosgate 1/0 give or take a 100 stands of REAL OFC copper wire. 5200 watts idk w=maybe because the ANL fuse is 250amps, still over rated haha. So far not issues.

Pros: Good long 17 feet of OFC wire! 5200 watts is over rated. Good set of RCA cables too.

Cons: none

Details

Hands-on research

Product Research

Features

Overview: This T-Spec v10-series amplifier wiring kit contains enough power and ground wire, RCA cable, turn-on wire, and connection accessories to install a single amplifier in most vehicles. The OFC (oxygen-free copper) wire included in this kit meets CEA-2016 and ANSI specification for wire gauge, and is BC-5W marine compliant. The high strand count gives you maximum flexibility and maximum conductivity. The v10-RAK1-0 kit is rated to 5,200 watts maximum power at 14.4 volts.

Contents: This v10-series amplifier kit contains the following:

  • Power Wire: 17' v10 1/0 AWG OFC multi-strand wire in a matte pearl white PVC blended jacket; the wire already has the v12 compact brass ANL fuse holder installed in-line, with a 250A ANL fuse; the battery end of the wire is terminated with a nickel-plated crimp-on ring terminal with a white boot (18mm outer diameter and 8.5mm inner diameter)
  • Fuse Holder Dimensions:
    • Width: 3-11/16"
    • Height: 1-7/16"
    • Depth: 1-13/16"
  • Ground Wire: 3' v10 1/0 AWG OFC multi-strand wire in a matte gray PVC blended jacket; one end is terminated with a nickel-plated crimp-on ring terminal with a silver boot (18mm outer diameter and 8.5mm inner diameter)
  • RCA Cable: 17' v10 noise-rejecting four-twist RCA cable with precision machined ends and quad-split tip
  • Turn-On Wire: 17' 18 AWG OFC remote turn-on wire in a blue jacket; neither end is terminated
  • Installation Accessories:
    • Two 1/0 AWG crimp-on spade terminals with white (power) and silver (ground) boots for amplifier connection
    • Red 18 AWG crimp-on spade terminal and red butt connector for remote turn-on wire connection
    • Firewall bushing for 1/0 AWG wire
    • Eight 5" Wire ties

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Never need to upgrade amplifier wiring kit again [ JUSTIN  Apr 06, 2017 ]
Order the T-spec wire, it is flexible and true OFC 0/1 awg. If you need more than 1500watts this will do 5200watts [ ROBERT  Sep 17, 2016 ]
Articles

Searches related to the T-Spec V10-RAK10 1/0-gauge amplifier wiring kit — includes 2-channel patch cable