Clamp-style Speaker Mounting: Speakers are held in place using two
adjustable side clamps, so you do
not need to use screws. When installed on the side clamps, the included
Ultragrip pads allow the side clamps to grip the sides of a speaker securely,
with relatively little pressure. If desired, screws may be used with the five security screw holes
on each bracket to attach the brackets to the speaker sides or bottom.
Speaker Compatibility: Each bracket will hold speakers from 5.5" to 11" wide, up to 13"
deep, and up to 20" high. The bracket will hold speakers up
to 55 lbs.
Tilt and Swivel Adjustability: The bracket platforms may be turned to the
left or right (180 degrees),
and may be tilted from -7 degrees below to 7 degrees above horizontal.
Materials: The bracket parts and wall plate are made of metal finished in a smooth satin
silver. The ball joint end cap is plastic.
Wall Mounting: The included
wall screws are 1.25" long. These brackets should
be attached to a wall stud, concrete, or brick. Wall anchors are provided for use with the wall screws when mounting the brackets to concrete or brick.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.