Skip Navigation

XS Power AK2000

Secondary battery wiring kit (2000-2500 watts)

3 Reviews | 1 question - 2 answers

Item # 122AK2000

In Stock

Live nearby? We can ship this product to your nearest Crutchfield store for you to pick up.

When you check out, choose the store closest to you in the “Ship To” address section. You’ll get an estimated pickup date and the store will contact you when your item is ready.

Charlottesville
825 Gardens Blvd
434.817.1100

Harrisonburg
109 South Carlton
540.434.1000

 Ships FREE

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

Chat Email

Overview

Our take on the XS Power AK2000

Why hunt around the web or your local big box store for the wires, fuses, and hardware you need to install a secondary battery in your vehicle? Save yourself some time and hassle with an XS Power wiring kit. You'll get everything you need — power wire, ground wire, fuses, fuse holders, wire ties, and even screws.

Everything you need, in one convenient kit

Why hunt around the web or your local big box store for the wires, fuses, and hardware you need to install a secondary battery in your vehicle? Save yourself some time and hassle with an XS Power wiring kit. You'll get everything you need — power wire, ground wire, fuses, fuse holders, wire ties, and even screws.

Rated for 2000 to 2500 watts, the AK2000 is designed to make installation as painless and easy as possible. The ring terminals are already crimped onto the wire, so all you'll really need for installation is a screwdriver and a tool to strip a small section of wire that goes into the fuse holder. Warranty: 1 year

What's in the Box:

  • 18' 2 AWG Power wire
  • 3' 2 AWG Ground wire
  • 2 ANL Fuse holders (200 amp ANL fuse installed in each)
  • 2 Battery clamps
  • 10 wire clamps
  • Two 2 AWG Crimp ring-terminals
  • Two 1-1/2" Pieces of heat-shrink tubing
  • 2 Grommets
  • Ten 1/2" self-tapping screws
  • Ten 4" Zip-ties
  • 5 mm Allen key
Reviews

XS Power AK2000 Reviews

Average Customer Review(s):

(3 Reviews)

XS Power AK2000

Jimmy from Summerland,or on 3/26/2017

Crutchfield Customer Review (What's this?)

Put the ak200 in the pickup his past weekend , was super simple to hook into my 12 volt system.plus the fact that you'll have the lowest resistance wires run into your power supply. Thumbs up, don't forget to get some wire loom and a few extra connectors if you are putting this into an isolated battery setup. Lim

Pros: High quality product

Cons: Had to buy wire loom and some extra connectors to make my hookup happen smoothly.

Lightest 2awg I've ever held

David from Florida on 12/23/2015

Crutchfield Customer Review (What's this?)

I'm glad the kit came with everything needed to hook up a 2nd battery. My gripe is that the wire is as light as a feather. I'll be getting my wire somewhere elese in the future.

Pros: Lots of things to connect two battery's.

Cons: Not enough copper wire in the 2awg plastic housing.

True to it's Gauge

JoshJesh from Sapulpa, Oklahoma on 11/23/2014

Crutchfield Customer Review (What's this?)

This product is exactly what I expected it to be, and it simplified ordering the kit piece by piece. A big thanks to Crutchfield for the advice, and super fast delivery time!

Pros: Thick, but still flexible

Cons: Nothing bad to say about it

Details

Hands-on research

Product Research

Features

Overview: The XS Power AK-2000 wiring kit is designed for installing a secondary battery to the vehicle's existing charging system. The kit comes complete with 18' of 2 AWG power wire that gets run from the existing vehicle battery to the new battery's location, and includes 2 ANL fuse holders, each with a 200 amp ANL fuse installed. The fuse holders should be placed in-line on the power wire 12 to 18 inches from each battery terminal. Wire is attached to the fuse holders with hex-head set-screws using the included 2.5 mm Allen key. Two battery clamps are included for connection to the new battery's terminals, as well as a 3' length of 2 AWG ground wire for the add-on battery. Other accessories include 10 wire clamps w/ self-tapping screws, 10 zip-ties, 2 rubber grommets, and 2 additional crimp-on ring terminals with two 1-1/2" pieces of heat-shrink tubing.

Specifications:

  • Wire Type: 10% OFC
  • Power Wire Length: 18 Feet
  • Power Wire Gauge: 2 AWG
  • Ground Wire Length: 3 Feet
  • Ground Wire Gauge: 2 AWG
  • Fuse Holders: 2
  • Fuse Type: ANL
  • Fuse Rating: 200 Amp

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

1 question already asked

Hey Charles, I installed a similar system on my vehicle last month. I ran the xs power/AK2000 to attach my deep cycle battery to the rear of the pickup, and with this system had enough wire to hook up the remaining 12 volt for the job. Other than adding a few connectors, fuses, and a splitting block. This kit had just about everything to hookup a spare battery, amplifier, and arb refrigerator/ freezer. [ JIMMY  Apr 08, 2017 ]
The XS Power AK2000 kit includes 16ft of 2AWG blue power wire, 3ft of 2AWG black ground wire, 6 2AWG crimp terminals, 2 battery terminals, 2 ANL Fuse holders and 2 ANL 200A fuses in addition to wire ties, screws and other accessories. If this is not what you had in mind, feel free to contact an Advisor directly by phone (1-800-324-9695) or online chat to see if we have something else to suit your needs. Hope that helps! [ Larry  Apr 06, 2017 ]  Staff

Searches related to the XS Power AK2000 Secondary battery wiring kit (2000-2500 watts)