Installation Note: Some newer vehicles require a special interface for this installation. Click here or call an Advisor at 1-888-955-6000 to see if you need an interface to install this steering wheel control adapter in your vehicle.
You want to install a brand-name stereo in your vehicle, but you hate to give up the convenience of your factory steering wheel radio controls? No problem. The SWI-JACK interface from PAC allows you to use the steering wheel controls in a wide variety of vehicles to command select brand-name radios.
Installation is straightforward connect a few wires, then program the adapter for your particular car and your stereo, and you'll retain the convenience of your steering wheel controls. The direct connection to the stereo eliminates the need for an infrared emitter, allowing the interface to function even in bright sunlight. Step-by-step LED confirmation makes programming easy. Once connected, the SWI-JACK's failsafe memory will learn up to 12 stereo functions, retaining them even if battery power is interrupted. Dimensions: 3-5/8"W x 1"H x 1-9/16"D. Warranty: 1 year.
Important Note: On some vehicles, you may need a voltmeter to locate the correct wires to connect to the SWI-JACK. If you have no car audio installation experience, you should consider professional installation. The SWI-JACK works with most Alpine, Clarion, JVC, and Kenwood stereos that have a wired remote control input port or a dedicated steering wheel input, but please call or email us to confirm compatibility with your radio.
Wiring Advisory: You'll usually have to tap into one to three wires in your vehicle at the radio location to connect this interface. If you're using a PAC OEM integration adapter to connect your new car stereo to your vehicle, then it most likely will have a prewired connector for this PAC steering wheel audio control adapter. In these cases, no additional wiring in required. PAC does provide custom wiring instructions for all confirmed compatible vehicles on their website.