Skip Navigation

Pioneer TS-A1305C

5-1/4" component speaker system

41 Reviews | 8 questions - 8 answers

Find what fits your vehicle

Can't find your exact vehicle?

Item # 130TA1305C

This item is no longer available.

Shop all Component Speakers

Overview

Our take on the Pioneer TS-A1305C

Are your car's factory speakers sounding less than fresh? Pioneer built their A-Series speakers to be high-performance replacements for your old speakers, designed from the ground up to bring back the life that your music's been missing. You'll be able to enjoy the clear vocals, chunky guitar riffs, powerful drums, and distinct bass lines that have always been a part of your favorite tunes, but have remained hidden behind sub-par speakers.

Side-view of the Pioneer TS-A1305C woofer

The woofer will add depth and impact to your favorite tunes.

Get more out of your music

Are your car's factory speakers sounding less than fresh? Pioneer built their A-Series speakers to be high-performance replacements for your old speakers, designed from the ground up to bring back the life that your music's been missing. You'll be able to enjoy the clear vocals, chunky guitar riffs, powerful drums, and distinct bass lines that have always been a part of your favorite tunes, but have remained hidden behind sub-par speakers.

Built to make your music rock

Pioneer equipped the TS-A1305C component speaker system with 5-1/4" multilayer mica-matrix woofers that stay rigid when the volume's turned up, keeping distortion to a minimum so your bass sounds clean. Install the separate 3/4" tweeters in a good spot up high in your vehicle for better stereo imaging. The system also includes 2-way outboard crossovers, a step up from the inline tweeter high-pass filters usually found in systems in this price range.

These speakers will sound great running off your factory radio, but they'll really shine when driven by an aftermarket receiver or an external amp. Don't drive another day listening to tired-sounding tunes, when you can enjoy Pioneer sound quality with these speakers in your vehicle. 

Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.

Good quality speakers I have them wired to a 60watt amp and max out the volume and the sound is very clear

Cees, Bronx, NY

What's in the Box:

  • Two 5-1/4" woofers
  • Two 3/4" Soft-dome tweeters (with attached 10" speaker leads terminated with quick-connects)
  • 2 Crossovers
  • 2 Woofer grilles
  • 2 Angled surface mount tweeter housings
  • 2 Flush mount tweeter housings
  • Two 1/2" Self-tapping screws
  • Eight 3/4" Self-tapping screws
  • 8 Speed clips
  • 2 Circular adhesive backed foam pads
  • Warranty information
  • Template and specifications on box

Product Highlights:

  • component speaker system includes component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
  • 5-1/4" multilayer mica-matrix woofer cone with elastic polymer surround
  • 3/4" polyester fiber soft-dome tweeter
  • power range: 5-50 watts RMS (300 watts peak power)
  • frequency response: 48-32,000 Hz
  • sensitivity: 89 dB
  • woofer top-mount depth: 2-1/8"
  • woofer grilles included
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Pioneer TS-A1305C Reviews

Average Customer Review(s):

(41 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

General
Speaker Size 5 1/4
Design 2-way
Tweeter Design 3/4" Dome
Tweeter Composition Polyester
Woofer Composition Multilayer Mica Matrix
Woofer Surround Rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) 89
Sensitivity at 2.83 volts N/A
Frequency Response 48 - 32k Hz
Minimum RMS Wattage 5
Maximum RMS Wattage 50
Peak Power Handling (Watts) 300
Impedance (Ohms) 4
Top-mount Depth (Inches) 2 1/8
Bottom-mount Depth (Inches) N/A
Cutout Diameter or Length (inches) 4 9/16

Product Research

Features

Woofers: The multi layer mica matrix cone was developed to provide an extra light, yet rigid diaphragm to reproduce full, rich sound.

Surrounds: For durability and a smooth response, each woofer uses a rubber (synthetic) surround.

Tweeters: The TS-A1305C system features 3/4" polyester soft-dome tweeters with magnetic fluid and Neodymium magnets for efficient, crisp, clear highs.

Tweeter Mounting: The tweeters can be flush mounted or surface mounted using the supplied housings. The surface mount housing positions the tweeters at approximately a 50° angle. Once installed the tweeters do not swivel.

Tweeter Mounting Dimensions:

  Angled Surface Mount Flush Mount
Mounting Height 1.633" 0.132"
Mounting Depth 0.46" (screw depth) 0.733"
Frame Diameter N/A 1.891"
Frame Depth 1.825" N/A
Frame Width 1.609" N/A
Cutout Diameter N/A 1.568"

Crossovers: The 2-way passive crossovers have a slope of 6 dB/octave and a crossover point of 8 kHz. The attached input wires are 17" long. The attached tweeter and woofer output wires are terminated with quick-slides; the tweeter wires are 38" long and the woofer wires are 18" long. The crossover dimensions are:

  • Width: 1.663"
  • Height: 0.847"
  • Length: 2.5"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Temporary speaker while waiting for opportunity to purchase Infinity Components. [ Jeffrey  Mar 08, 2016 ]
One of the best brands. I only buy this brand. Great quality and last long time. [ Jaime  Feb 05, 2016 ]
like pionner products [ Mario  Dec 05, 2015 ]

8 questions already asked

I used 50 watts per side. It said it was 100 watts. BUT, fin e print was 50 watts x 2. Worked fine. No longer own the car, but I liked driving it much better after these were installed than before. [ BCash  Dec 04, 2015 ]
I forwarded your question to an Advisor and they responded with the following: You cannot mount the tweeter onto the woofer in this set of speakers. Flush mounting refers to mounting the speaker in an existing tweeter location where it is hidden behind the factory speaker grille. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy  Oct 19, 2015 ]  Staff
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle. [ Krissy  Aug 18, 2015 ]  Staff
Hi Jason, That is a good question. In my application (2002 Chevy Tahoe), I had separate feeds (wires) going to the the factory woofer and factory tweeter. These feeds came from the factory amplifier, and as such the hi and low signals were already split out. I did not use the Pioneer cross-over, as the source cabling (wires) would only supply either the hi-freq or low-freq signals (depending on which speaker feed was being connected to. If the source cable is full spectrum, like a direct connection to the head-end, then the cross-over will be utilized fully and split the signal to the new woofer and tweeter. So to simplify, if you are using factory speaker wires, and there is separate signal feed to the woofers and tweeters, you probably do not need to connect the cross-over, as the factory wiring usually has an on-board amp which splits the signals. If you know that the cabling goes directly to the head-end and/or after-market amp, then utilize that single signal feed to the cross-over. I hope that answers your question and was not too confusing. As far as stripping wires, the new had polarized bullet connectors between the cross-over and speakers; you can get a matching factory connector or solder or crimp old wiring to new. [ WILMAR I  May 22, 2015 ]
The outside edge of the speaker grill is 6 1/8 inches. [ TIM  Oct 14, 2014 ]
I installed these speakers in a 2000 Saturn LS 1 Just some minor shaping with a dremel and they fit like a glove. Can't say for Buick [ ROBERT  Jul 13, 2014 ]
For details on fit or installation please contact an Advisor by phone or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle. [ Jeff  Jan 12, 2014 ]  Staff
Articles