Skip Navigation

Pioneer Stage 4 TS-S062PRS

2-5/8" component midrange speakers

6 Reviews | 3 questions - 11 answers

Find what fits your vehicle

Can't find your exact vehicle?

Item # 130TSS062P

This item is no longer available.

Shop all Midrange Speakers

Overview

Our take on the Pioneer Stage 4 TS-S062PRS

Each TS-S062PRS 2-5/8" speaker features a cone made from hard Aramid fibers and cellulose pulp that gives your music a mellow feel while still handling sharp attacks with clean fidelity. A rubber surround holds its shape even when the speaker's driven hard, so you'll enjoy impressive midrange accuracy that'll make the vocal and instrumental details sound out. An aluminum center plug improves sound dispersion and dissipates heat for a longer life.

Pioneer Stage 4 PRS Midrange Component Speakers

Pioneer PRS Series component speaker systems deliver superb sound with a wide open soundstage, so you'll hear your music faithfully reproduced and in perfect balance throughout your car's interior. Pioneer designed these midrange component speakers as part of their Stage 4 System, along with the DEX-P99RS receiver, PRS Series amplifiers, PRS component speaker systems, and the TS-W252PRS subwoofer, to deliver uncompromised sound quality in your vehicle.

Two-layer cones for clear and mellow vocals

Each TS-S062PRS 2-5/8" speaker features a cone made from hard Aramid fibers and cellulose pulp that gives your music a mellow feel while still handling sharp attacks with clean fidelity. A rubber surround holds its shape even when the speaker's driven hard, so you'll enjoy impressive midrange accuracy that'll make the vocal and instrumental details sound out. An aluminum center plug improves sound dispersion and dissipates heat for a longer life.

Back chamber improves power handling and tightens the sound

Each TS-S062PRS comes with a sealed "chamber" that you can fit onto the back of the speaker to acoustically suspend the cone, which increases power-handling ability and improves the speaker's transition from your music's low notes to the midrange.

How these speakers fit in your Stage 4 system

The DEX-P99RS Stage 4 receiver boasts 4 sets of preamp outputs for highs, mids, lows, and subs, allowing you to add these TS-S062PRS midrange speakers to a PRS component system, then use PRS Series amps to drive each component separately. You'll enjoy a powerful stereo image and superb sound quality.

Pioneer's Stage 4 System

Check out all the products in Pioneer's Stage 4 System, including receiver, speakers, subs, and amps.


Priced per pair

Incredible craftsmanship/performance in a tiny package. And Crutchfield made the $$ bite less painful selling them for less than half retail. They can easily stand up to the two pair of Polk mids that I'm running, and are able able to place that power into the 2 1/2" space available in my dash!

Bluemalibu, California

What's in the Box:

  • Two 2-5/8" midrange speakers
  • 2 Mounting cups (with attached 11" speaker wire and installed polyfil)
  • 2 Mounting rings
  • 2 Machine screws (with lock-and flat-wahsers attached)
  • 8 Self-tapping hex-head screws
  • 8 Self-tapping Phillips-head screws
  • Strip of self-adhesive foam
  • Installation Instructions
  • Limited Warranty information

Product Highlights:

  • 2-5/8" component midrange speakers (pair)
  • Aramid fiber and pulp cone
  • rubber surround
  • 4-ohm impedance
  • frequency response: 80-40,000 Hz without chamber, 100-40,000 Hz with chamber
  • power range: 5-15 watts RMS (60 watts peak) without chamber, 5-50 watts RMS (200 watts peak) with chamber
  • sensitivity: 85 dB
  • grilles included
  • depth: 1-1/4" without chamber, 1-5/8" with chamber
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Pioneer Stage 4 TS-S062PRS Reviews

Average Customer Review(s):

(6 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Product Research

Features
Specifications & Dimensions

Features

Overview: The Pioneer TS-S062PRS are Reference Series 2-5/8" component midrange speakers which delivers clarity to male and female vocals.

Midrange Driver: The Pioneer TS-S062PRS midrange drivers feature an Aramid fiber and pulp cone with a rubber surround.

Acoustic Chamber: The Pioneer TS-S062PRS midrange speakers come with a mounting-cup (acoustic chamber) which increases power range, but lowers bass response.

Grille: The TS-S062PRS midrange speakers are equipped with integrated (non-removable) grilles.

Installation: The TS-S062PRS midrange drivers are designed to be top-mounted with or without the included mounting cup (chamber).

Specifications & Dimensions

Specifications Chart:

Specifications With Acoustic Chamber (mounting-cup) Without Acoustic Chamber (mounting-cup)
Power Range  5 to 50 watts 2 to 15 watts
Max Power 200 watts 60 watts
Frequency Response 100 Hz to 40 kHz (-20 dB) 80 Hz to 40 kHz (-20 dB)
Sensitivity 85 dB (+/-1.5 dB) 85 dB (+/-1.5 dB)

Dimensions Chart:

Specifications With Acoustic Chamber (mounting-cup) Without Acoustic Chamber (mounting-cup)
Frame Diameter 3.385" 3.45"
Cut-Out Diameter 2.675" 2.495"
Mounting Depth 1.6875" 1.25"
Mounting Height 0.6875" 0.5"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

3 questions already asked

Hi, I don't have a Silverado, but I used them on my Toyota 4 Runner and they perform beautiful!!!! The sound is clean and natural. Hi end sound!!!! [ EDGAR  Feb 09, 2015 ]
There is a member on diymobileaudio that has use these in that exact location. And from what I remember they fit the best out of 3 simar size midrange drivers. [ Nita  Feb 09, 2015 ]
few thousand people, do it, awesome speakers [ Denver IT  Feb 08, 2015 ]
Yes. Fits without the cup no modification or you can bore out the hole a bit to fit the speaker with the cup which I did. Hard to screw it down though.Good luck. [ sirboomdotcom  Feb 08, 2015 ]
Do a search on DIYMA using the above title (2014 Chevrolet...). I tried posting a link but Crutchfield won't allow it. [ Narvarr  Feb 08, 2015 ]
This might help you some:htt163873-2014-chevrolet-silverado-z71-lt-non-bose-no-center-console [ Narvarr  Feb 08, 2015 ]
I can't answer your question directly regarding the Silverado, but if your mids and tweets are currently directed towards the windshield as most vehicles are that have speakers in the dash, I would not recommend putting any aftermarket speaker in those locations. The windshield is a nasty source of sound reflections, and sound directed at it typically causes image smearing and frequency issues. These speakers, as well as any others, would do much better facing away from the windshield and pointed more on-axis with the listener. As far as these particular speakers are concerned, I do have them and they do sound good. [ Ryan  Feb 08, 2015 ]
I have no real experience with that application but I know for a fact that it has been done. Crutchfield won't allow me to post a direct link but if you web search... 2014 Chevrolet Silverado Z71 LT (Non-Bose, No Center Console) It should get you some great info/reading for your project Good luck! [ MICHAEL  Feb 08, 2015 ]
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question. [ Greg  Jul 28, 2014 ]  Staff
The screw mounting holes are 2 1/8 inches apart. The mounting hole is 2 5/8 when using the included spacer, and 2 3/4 without. [ Michael  Apr 27, 2014 ]
We show the mounting hole dimensions as: Perimeter 1: 2.085" Perimeter 2: 2.145" Diagonal 1: 2.915" Diagonal 2: 3.025" [ Jeff  Apr 25, 2014 ]  Staff