Overview: The Pioneer TS-W302R 12-inch, 4-ohm component subwoofer
handles 800 watts max. (150 watts RMS nominal power), and features Pioneer's
extremely strong and lightweight IMPP Composite Cone Woofer, for improved
sensitivity and reduced distortion. The woofer's Conex Damper with Damper Ring
delivers higher power handling and deeper bass, and its 4-Layer Long Voice Coil
adds extra power and control. In addition, the woofer's Wide-Roll, Dual-Layer
Urethane Surround provides excellent control for your big bass notes, and the
woofer's Projected Pole Yoke with Vented Pole delivers tight, powerful sound
with lower distortion.
IMPP Woofer: The Pioneer TS-W302R features
an IMPP (Injection Molded PolyPropylene) woofer cone. The IMPP cone
design provides the strength and rigidity powerful bass sound requires.
The Wide-Roll, Dual-Layer Urethane Surround provides excellent control for big
Voice Coil: The woofer's
4-layer long voice coil design allows expanded piston motion for better
linearity, improved power handling, and more bass impact.
Projected Pole Yoke: The
projected pole yoke extends the magnetic field, greatly improving linearity
during large woofer excursions at high input levels.
Vented Pole Yoke: The vented
pole yoke allows air circulation within the motor structure to ensure better heat
Terminals: The heavy duty spring compression terminals will accept bare wire up to 10
gauge, pin connectors, and single or dual banana plugs.
Sealed Box Volume: The sealed box sizes recommended
by Pioneer range from 1.0 cu/ft to 2.0 cu/ft. Within this range, the ideal size
recommended by Pioneer is 1.5 cu/ft.
Vented Box Volume: The vented box sizes recommended
by Pioneer range from 1.25 cu/ft to 2.05 cu/ft. Within this range, the ideal
size recommended by Pioneer is 1.65 cu/ft. The recommended port diameter is 3".
The recommended length varies with enclosure size; 9" long with the 1.65 cu/ft
enclosure, 11" long with the 1.25 cu/ft enclosure, and 7" long with the 2.05
Bandpass Volume: The bandpass box sizes recommended by
Pioneer range from 1.4 cu/ft to 2.2 cu/ft. The ideal enclosure has a 1.0 cu/ft
sealed rear chamber and a 0.8 cu/ft ported front chamber. The minimum
recommended size has a 0.7 cu/ft sealed rear chamber and a 0.7 cu/ft ported
front chamber. The maximum recommended size has a 1.2 cu/ft sealed rear chamber
and a 1.0 cu/ft ported front chamber. A 3" diameter x 7" long port is
recommended for all three sizes.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.