Disc/SDHC memory card Playback
Overview: The CarShow GPS Navigation & Multimedia In-Dash
2DIN head unit (CS-GM1010-P11) offers a factory look for select 2006-2011 GM
vehicles (with GM29-Bit Data CAN Bus system). The CarShow GPS Navigation &
Multimedia In-Dash 2DIN head unit will fit perfectly in the dash without the use
of a kit and comes supplied with direct plug-in factory harnesses. Current
compatible vehicles include (as of 4/12/2012):
Note: GM vehicles contain a number of different audio
systems. This CarShow head unit (CS-GM1010-P11) is designed to cover
specific GM vehicles with amplified (Bose) and non-amplified Audio Systems.
It is not compatible with the Bose Centerpoint system. As always,
please consult Crutchfield's
Outfit My Car to verify compatibility with your vehicle.
OnStar Compatible: This unit is compatible with GM's factory
High-Resolution Touch-Screen LCD Display: The CarShow
Navigation & Multimedia head unit features a 7" high-resolution, wide-screen, touchscreen LCD
display. You can adjust the brightness, color, and contrast
of the display. The display also offers three dimmer settings (Bright, Dim, and
Off). In addition, you can set the LCD monitor to display a Widescreen,
Letter-Box, or Pan&Scan image.
Start Up Time: The CarShow GPS Navigation & Multimedia head
unit (CS-GM1010-P11) has a start up time of approximately 20 seconds from Off to
an audio/video source screen; and another 65 seconds to the map screen for a
total start up time of approximately 1 minute 25 seconds from Off to the
navigation map screen.
Spectrum Audio Display: The unit features a spectrum audio
listening to music.
Screen Saver: The unit's screen saver will display after 3-4 minutes
of no operation.
Hard-Key Controls: The unit also features rotary volume and tuning
knobs, along with push-button controls along the left and right side of the LCD
Parking Brake Detection: The CarShow Navigation & Multimedia head unit
contains a built-in DVD player and integrated LCD monitor, which is not intended for viewing
while driving. The unit's video player is disabled when the vehicle is in motion through a
connection to your vehicle's parking brake.
Rear Seat Entertainment: The CarShow Navigation & Multimedia
head unit is compatible with factory rear seat audio/video entertainment. The selected
video source for the unit's rear video output can be displayed on your vehicle's
factory overhead monitor, even though you will not be able to view it on the
unit's built-in LCD monitor while you are driving. The same audio from the
vehicle speakers will play through the factory rear seat audio. You can continue
to use your vehicle's rear-seat entertainment controls.
Navigation Mapping Software: The map database (by TeleAtlas)
used by the CarShow CS-GM1010-P11 was created using high-resolution aerial and
land based data collection. Navigation data is stored on a pre-installed 4GB
SDHC memory card for quick access and response. The head unit provides map
coverage of the entire United States (all 50 states). The unit's integrated iGo
Primo navigation software provides turn-by-turn visual and voice assistance to
direct you to your selected destination. The built-in software quickly
calculates step-by-step directions to any destination available on the included
Note: The pre-installed 4GB SDHC memory card must remain in the head unit
during navigation. If the SDHC memory card is removed, you will not be able to access
the head unit's navigation functions. When you reinsert the SDHC memory card, the
head unit must be reset to restore navigation functions. The navigation
content on the SDHC memory card contains a License Code. This code cannot be moved to
different cards. If the SDHC memory card is lost or damaged in anyway , it will
render this Navigation system inoperable. Damaged or deleted files on the
navigation SDHC memory card are not covered under the product warranty.
Map Updates: Car navigation maps are frequently updated. While
this database was judged to be as accurate as possible at the time of its
release, a map database can never be 100% accurate. Road information that is
maintained in the map databases, such as turn restrictions or road names may
change over time. It is easy to keep the navigation system up to
date. Simply download new map data from
naviextras.com, store the updated map data on a SD card and insert it
into the head unit via the front-panel SD card slot.
GPS (Global Position System): The unit's built-in navigation
helps you find your way to your destination with an integrated GPS receiver &
external GPS antenna. The CarShow CS-GM1010-P11 features a built-in SiRFprima GPS
receiver and includes an external magnetic GPS antenna. The head unit uses
Global Position System (GPS) satellites, and a digital roadway map database to
calculate and display vehicle positioning and travel direction. The unit
considers vehicle speed an heading changes, together with longitude and latitude
information, to accurately determine vehicle heading and position on a digital
map. Signal from GPS satellites are used to determine the vehicle location.
Three (good) or four (best) satellites must be receive to accurately determine
Note: This unit does not transmit your GPS position, so
others cannot track you.
On-Screen Map: The unit's on-screen map shows your vehicle's
current position (a red arrow by default), the recommended route (an orange
line), the surrounding map area, and your destination as a checkered flag. The
on-screen map shows streets, roads, and highways in a way that is similar to how
a paper road map shows them. A road's width and colors corresponds to their
importance, so you can easily tell a freeway from a small street. When
navigating a route, the top section of the map screen shows information about
your next route maneuver and the next street or the next city/town. When
approaching a turn, the map screen will zoom in and raise the view angle to let
you easily recognize your maneuver at the next junction. If the next turn is at
a distance, it will zoom out and lower the view angle to be flat so you can see
the road in front of you. The map also displays data; such as the posted speed
limit, your current speed, current time, distance to your destination, time left
before you reach your destination, and your arrival time.
- 2D/3D Map Mode: The navigation head unit allows you to
view its on-screen map in a 2D (two-dimensional) or 3D (three-dimensional)
view. Similar to paper road maps, the 2D mode, shows you streets, roads, and
elevation by color. In 3D mode, you can see the altitude and elevations
differences. You can distinguish between valleys, mountains, and elevated
roads. In selected cities 3D landmarks and 3D buildings are also displayed.
- Color Mode: The navigation map screen uses different
color themes (Day/Night) during the day and during the night for both the
map and the menu screen. Daytime colors are similar to paper road maps, and
the menus are bright. The night color themes use dark colors for large
objects to keep the average brightness of the screen low. You can also set
the navigation unit to switch between daytime and night color modes
automatically based on the current time and GPS position.
Lane Information & Signposts: The unit's navigation map
offers helpful lane information & signpost guidance.
- Lane Information: When driving on multilane roads,
it is important to take the appropriate lane in order to follow the
recommended route. If lane information is available in the map data, the map
screen will display the lanes and their directions using small arrows at the
bottom of the map. Highlighted arrows represent the lanes you need to take.
- Signposts: Where additional information is available,
signposts substitute arrows. Signposts are displayed at the top of the map.
The color and style of the signposts are similar to the real ones you can
see above the road or by the roadside, They show the available destinations
and the number of the road the lane leads to.
- Junction View: If you are approaching a freeway exit or
a complex intersection and the needed information exists, the map is
replaced with a 3D view of the junction. The lanes you need to take are
displayed with arrows. Signposts can also be present, if information is
- Tunnel View: When entering a tunnel, the map is
replaced with a generic tunnel image so that surface roads and buildings
cannot distract you.
Audible Alerts: The CS-GM1010-P11 offers various audible
alerts and functions to help you get to your destination safely.
- Voice Guidance (Text-to-Speech): In addition to graphic
directions, the receiver provides voice guidance and turn-by-turn
directions. You can select from English, French, Spanish, Korean, Japanese,
and Chinese audible languages. The volume of the voice prompts can be
increased with increases in speed to overcome road noise. Voice guidance can
be turned off if you prefer.
- Safety Alert: This function can warn you when you
approach road safety cameras, school zones, or railroad crossings (if
available). You can also add your own alert points. Beeps or the spoken type
of alert will be heard when you are approaching of these points.
- Speed Limit Warning: Some maps may contain information
about the speed limits of certain road segments. The head unit provides an
audible warning if you exceed the recommended speed limit.
Where Am I?: This screen contains information about the
current position (or approximately the last known position if GPS reception is
not available) and a button to search for POIs nearby.
Find Menu: The Find Menu gives you many different ways to
choose your destination or insert a waypoint in your current route. An on-screen
keyboard appears to allow you to enter your destination from one of the
for a destination by scrolling the map display.|
Address||Enter a full address or
part of an address, or two intersecting streets. |
Places||Search for over
11,000,000 points-of-interest (POIs) by name or category; search
near your current location, in a specific city, along your current
route, or near your destination.|
|Favorites||Store your favorite
locations for easy recall.|
|History||Destinations that you
have set previously.|
coordinates (latitude & longitude).|
Route Calculation: The built-in navigation system calculates
the route base on your preferences. You can choose from the following:
- Route Method: You can choose which route method
(Fastest, Shortest, Green, or Easy) the navigation unit should use when
calculating your route.
- Fastest: give a quick route, if you can travel at
or near the speed limit on all roads. Usually the best section for fast
and normal cars
- Shortest: gives a route that has the smallest total
distance of all possible routes. It can be practical for slow vehicles
- Green: gives a quick, but full efficient route
based on the fuel consumption data you provide
- Easy: results in a route with fewer turns and no
- Avoidances: You can tell the navigation unit to avoid
certain types of roads along your calculated route, such as - Highways,
Tolls, Carpool/HOV, Unpaved Roads, and/or Ferries.
Inserting Via-Points: You can expand your route by inserting
via-points (intermediate destinations).
Itinerary: The Itinerary is the list of the route events and
Trip Logs: Trip logs contain useful information about your
trip. Trip logs can be saved manually when you reach your destination or
automatically along your route. Trip log data includes - Start/End Time,
Avg./Max. Speed, Total/Driving/Stopped Time, Total Distance, and Min./Max.
Detour: This screen contains quick detour possibilities
during navigation so you can bypass a part of the route.
Automatic Route Recalculation: The unit will automatically
recalculate your route if you stray from the navigation unit's previously
MOSFET Amplifier: The CarShow navigation/multimedia head
unit is equipped with a MOSFET amplifier. Compared to conventional power
supplies, the MOSFET amplification circuit is smaller and more efficient, and it
delivers increased power with less distortion and absolutely zero on/off
switching noise. More power means louder and cleaner music at higher volumes
because you're not pushing the limits of the amplification circuit. The power
output specs for the CarShow receiver are as follows:
- Full Bandwidth Power: 25 watts RMS x 4 channels (at 4
ohms, 20-20kHz, 1% THD)
- Maximum Output Power: 45 watts x 4 channels
Preset EQ Modes: The CarShow Navigation & Multimedia head unit
features five preset EQ modes (Rock, Jazz, Pop, Classic, Flat) and one custom
sound field mode.
Custom EQ: The Custom EQ mode allows you to adjust the
unit's bass (100Hz), midrange (1kHz), and treble (10khz) manually (+/-8dB).
BBE: The CarShow Navigation & Multimedia head unit offers BBE sound
processing for excellent high, mids, and low frequency reproduction. BBE can be
adjusted between 0-16.
Sound Modes: The CarShow Navigation & Multimedia head unit offers
the following sound modes.
- Stereo: Audio is output from the left and right channel
for 2-channel stereo.
- Dolby Stereo: Dolby Stereo distributes the sound from
the middle and the surround channels of a soundtrack to the left and right
speaker channels of the unit.
- V. Surround: The left and right channels create a
surround sound effect from a two-channel source.
- Dolby Digital: The CarShow Navigation & Multimedia head unit
supports Dolby Digital playback via Rosen's Dolby5.1/Amp harness
(135DP1011, sold separately), when connected to an optional external
processor and 5.1-ch amplifier.
Speaker Level: You can adjust the level (+/-8dB) of each
connected speaker (LR, LF, RR, RF, CTR, and SUB).
5.1 Preamp Outputs (Optional): With the optional Rosen
5.1-channel RCA output harness (135DP1011,
sold separately) you can connect external aftermarket amplifiers for a 5.1
speaker audio system.
AM/FM Radio: The Navigation & Multimedia head unit features a built-in
AM/FM tuner with manual, seek, scan, and preset tuning.
AM/FM Presets: The unit offers 18 FM station presets (6 stations each for FM1/FM2/FM3) and 6
AM station presets (24 total presets). Station presets can be manually entered or automatically
Radio Data System (RDS): The unit's tuner features RDS
(Radio Data System). RDS is a service used by some radio stations to transmit
data outside of normal radio broadcast signals. When an RDS station is received,
you can immediately find out what kind of data is being transmitted by looking
at the program service name which appears in the display after the frequency.
RDS features an emergency transmission function which interrupts regular
programming to broadcast an emergency announcement (such as a tornado or severe
storm). There is also a switchable Traffic Information function, which will
automatically tune to a traffic bulletin when it is broadcast, even when you're not
listening to the radio.
XM Satellite Radio: The Navigation & Multimedia head unit comes
with an XM interface harness and is equipped to use to your factory installed XM
Satellite Radio tuner. You can store up to 24 XM presets.
Disc Compatibility: This Navigation & Multimedia head unit supports
playback of DVD, DVD-R/RW, DVD+R/RW, VCD, CD, and CD-R/RW discs (12cm discs
only). The unit also supports MP3 audio files and JPEG still-image files recorded onto CD-R/RW discs.
Automatic Play: A disc can be inserted at any time in the unit and the
system will automatically switch to disc playback.
Last Memory: If you stop playback of a disc, the disc will resume play
from where it last left off, as long as you do not eject the disc.
Parental Control: Parental Control allows you to restrict
DVD playback according to a predetermined level. You can select a parental
control rating from 0-8, which is protected by a 4-digit password.
Front-Panel SD/SDHC memory card Slot: The CarShow Navigation & Multimedia
head unit features a front-panel SD/SDHC memory card slot for playback of MP3
audio files or JPEG still-image files recorded onto an SD/SDHC memory card (up to 4GB).
Internal Flash Memory: The CarShow Navigation & Multimedia
head unit is equipped with an internal flash memory which allows you to copy
music tracks from a CD disc to the head unit as an MP3 file. The unit features 6
folders (1, 2, 3, 4, 5, and Favorites) to store your music. Once you have copied
your CD's music over to the head unit's internal memory, you can listen to those
stored songs at anytime, without inserting the CD.
JPEG Playback: JPEG still images can be viewed as thumbnails
(up to 12 images) or a single image.
Front-Panel USB Port: The CarShow Navigation & Multimedia
head unit features a front-panel mini-USB (type-B) port and comes with a mini-USB
type-B to USB type-A cable for connection of a USB mass class storage device (up
to 8GB), so you can play back your MP3 audio files or JPEG still-image files
stored on your USB thumbdrive.
iPod/iPhone Interface: The CarShow Navigation & Multimedia
head unit supports audio/video playback, control, information display, and
charging of select iPod/iPhones, using the included proprietary Rosen
iPod/iPhone harness. This unit supports the following iPod/iPhones (as of
|iPod/iPhone||Generation||Tested Version||Media Type||Control Type||Display Type||Charge|
|Audio||Video||Head Unit||iPod||Song/Artist Text||Track Info |
- *The iPod nano (7th gen), iPod touch (5th gen), and iPhone 5 will
require the Apple Lightning to 30-pin adapter (sold separately).
- Apple iPod/iPhone software updates may change functionality results.
If you download a newer software version, you may need to reset the head
unit and your iPod/iPhone to regain functionality. If this doesn't work,
you may need to wait until a newer software update is available.
Optional Audio/Video Input: You can also add the Rosen
audio/video input harness (135DP1009,
sold separately) consisting of a composite video connector and stereo RCA
connectors, so you can connect an external AV source to the unit.
Optional Audio/Video Output: You can add the Rosen
audio/video output harness (135DP1008,
sold separately) which consists of two composite video outputs and a pair stereo
RCA audio outputs, which allows you to connect the head unit to an external
headrest and/or overhead monitor.
Note: You can watch and listen to the same source which
is being played back on the unit's integrated LCD monitor on a connected
external monitor and wireless headphone kit, or watch and listen to a
different source. You can choose AM/FM, SAT, (optional tuner kit required),
iPod (optional harness required), Disc, Aux (optional harness required), or
MP3 for the second zone.
Reverse Camera/Sensor Operation: The CarShow Multimedia
head unit can be connected to an optional Rosen rear-view camera (135DP1068,
sold separately) or back-up sensor kit (135DP1030,
sold separately), using the optional Rosen back-up camera/sensor harness (135DP1010,
sold separately). This allows you to view the image from the rear camera on the
unit or use the backup warning system. When the camera is connected, the unit
will automatically switch to the back-up camera display whenever the reverse
gear is engaged.
Note: The optional rearview camera and sensors are
provided for additional information only. As the driver, you should always
check your surroundings before backing-up the vehicle.
Built-In Bluetooth Hands-Free Interface: This unit provides
Bluetooth Hands-Free communication functions. If your mobile phone is Bluetooth
enabled, it can establish a point-to-point connection with the CarShow head unit,
providing telephone dial-up, call answering, and Bluetooth music play functions.
The CarShow navigation & multimedia unit displays incoming calls, received calls, and
missed calls (the 5 most recent calls in each category are displayed). You can
dial out using your phone or using the unit's touchscreen monitor. Incoming call
phone numbers are displayed on-screen. Using your vehicle's speakers and the Rosen
head unit's built-in microphone, you can carry on your cell-phone conversation
without picking up your phone. If your cell-phone also supports Bluetooth music
play, the audio for your cell-phone can heard through your vehicle's speakers.
You can control basic music playback functions such as Play/Pause, Stop,
Note: You can pair up to six phones
(using only one at a time).
Steering Wheel Controls: The CarShow Navigation & Multimedia
head unit can be set up through its menu system to retain your factory steering
wheel controls (using the factory steering wheel controls does require splicing
into factory wires at the radio location, and possibly elsewhere; there is no
plug in adapter available for this function).