Skip Navigation

JL Audio 10WXv2

WXv2 Series 10" 4-ohm subwoofer

29 Reviews | 1 question - 1 answer

Item # 13610WXV2

This item is no longer available.

Shop all Component Subwoofers

Overview

Our take on the JL Audio 10WXv2

JL Audio builds their hard-hitting WX Series subs for the long haul. Patented cooling and construction technologies allow these subs to pump out accurate, lifelike bass, while standing up to the inevitable abuse that every sub will see. Plus, JL Audio designs the sub's inner works to deliver a one-two punch of extended cone excursion and precise response.

Built for hard-hitting, long-lasting performance

JL Audio builds their hard-hitting WX Series subs for the long haul. Patented cooling and construction technologies allow these subs to pump out accurate, lifelike bass, while standing up to the inevitable abuse that every sub will see. Plus, JL Audio designs the sub's inner works to deliver a one-two punch of extended cone excursion and precise response.

Ideal when space is tight

Two views

The 10WXv2 works great in both sealed and ported enclosures, utilizing a polypropylene cone with a foam surround for powerful, reliable bass reproduction. The rear gasket provides improved sealing in your enclosure, while the heavy-duty 4-ohm voice coil resists breakdown under extreme conditions. The customizable trim ring lets you add a personalized look to your setup.

To drive this single subwoofer, we recommend a mono amplifier rated between 150 and 300 watts RMS at 4 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.

Nice low end sound.

Anonymous, Conyers, GA

What's in the Box:

  • One 10" Single voice coil 4-ohm subwoofer
  • Owner's manual

Product Highlights:

  • 10" 4-ohm subwoofer
  • polypropylene cone with foam surround
  • power range: 50-200 watts RMS
  • frequency response: 25-250 Hz
  • sensitivity: 86.06 dB
  • top-mount depth: 4-13/16"
  • sealed box volume: 0.625 cubic feet
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

JL Audio 10WXv2 Reviews

Average Customer Review(s):

(29 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Product Research

Features
Enclosure Compatibility

Features

Dynamic Motor Analysis (DMA): DMA is a JL Audio proprietary method of improving dynamic motor behavior. As a result of DMA optimization, the woofer's motor remains linear in motor force over a long excursion range, and maintains a stable fixed magnetic field in the gap over a wide power range. The result is reduced distortion, faithfully reproduced transients, and tight, clean, articulate bass.

Elevated Frame Cooling: The elevated frame design of the 10WXv2 delivers cool air through slots directly above the top-plate to the voice coil. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.

Rear Gasket: The woofer has an integrated foam rear gasket which provides an optimal seal when installing into the enclosure.

Enclosure Compatibility

Sealed Box Volume: JL Audio recommends a 0.625 cubic foot sealed box. A diagram is provided in the owner's manual for a sealed box with external dimensions of 17-1/4" W x 11" H x 9" D, assuming 3/4" thick material. (If using 5/8" thick materials, you should subtract 1/4" from each dimension.)

Ported Box Volume: JL Audio recommends a 1.0 cubic foot ported box. A diagram is provided in the owner's manual for a ported box with external dimensions of 22" W x 12" H x 10-1/2" D, assuming 3/4" thick material. (If using 5/8" thick materials, you should subtract 1/4" from each dimension.) A single 3" diameter x 13-1/2" long port is recommended, resulting in a tuning frequency of 35 Hz.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Always liked J&L subs [ Tyson  Feb 23, 2017 ]
replacing previous 10w04 that gave up the ghost after 12 years of hard use...have nothing but good to say about JL products. [ James  Feb 21, 2017 ]
I chose JL Audio because of their higher standard of quality at an affordable price, and I chose Crutchfield because of their customer service. To me it's a win win combination. [ guy  Feb 04, 2017 ]
JLAudio is affordable and this 10WXv2 has a very solid sound of power [ Jim  Jul 13, 2016 ]
just because they`re the best [ Eric F.  Jun 18, 2016 ]
Power requirements were a good match for the system I was building. JL name. [ SHAWN  Jun 08, 2016 ]
Bass [ Timothy  Jan 19, 2016 ]
My son requested these as a Christmas gift. [ Kelly  Dec 04, 2015 ]

1 question already asked

Thanks for your question. For information on comparing two or more models I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget. [ Krissy  May 20, 2016 ]  Staff
Articles