JL Audio 6W3v3-4
2017 Subaru Crosstrek
Crutchfield Customer Review (What's this?)
Pros: HUGE magnet, great deep sound
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
JL Audio built their W3v3 subwoofers to deliver powerful, accurate bass with a medium-power amplifier. Their extensive motor assembly research resulted in a design that ensures smooth, precise cone movement at any power level. Exclusive cooling features shunt heat away from the sub's internal motor structure for long term durability and reduced distortion.
The 6W3v3-4 subwoofer boasts a 6.5" mineral-filled polypropylene cone with a distinctive metallic JL Audio medallion. A patented design eases the stress felt by the rubber surround during cone movement, for increased reliability and consistent bass output. The removable, customizable trim ring accepts optional JL Audio grilles, and can be painted to enhance your installation. This W3v3 sub works well in a sealed enclosure.
To drive this single subwoofer, we recommend a mono amplifier rated between 120 and 225 watts RMS at 4 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.
Average Customer Review(s):
Pros: HUGE magnet, great deep sound
Didn't come with mounting brackets and wasn't enough power to power the speakers like they said there would be
Small but seem to be very well made
Pros: Small and can fit in factory speaker locations
Cons: Not as much bass as a 10 or a 12 but an excellent addition.
I purchased these for my boat. These are Great! Especially if you have clearance issues for mounting surface. If you find yourself in a bind and need small woofers- these are them! Sound great and put out clean bass! Highly recommend these woofers.
Pros: Hard hitting for the size. Clean tight sound. Speaker quality is superior.
Cons: Heard JL audio is phasing these out?
Great mini sub. I used them for rear fill in my rear doors. Use plenty of sound deadening. These little guys are powerful. Pick up a pair NOW! JL Audio has discontinued them.
Pros: Great bass from 6.5 sub
Cons: not really a con, but some minor fabrication is necessary for door mounting
I finally found the ideal mid range speaker! The 6W3v3-4 delivers the tight, and refined bass that I have been searching for. This speaker is very efficient in that it delivers huge sound from low power (50-150W) which works well with my OEM head unit. The 6W3v3-4 delivers the kind of clean, "long winded" and distortion free bass that you would expect from a heavily amplified set-up. As advertised, the 6W3v3 works well in small sealed spaces. I've mounted this speaker in my sealed front doors and they show no signs of suffocating; they move air like a much larger ported enclosure.
Pros: - Very efficient (huge sound from low input). - Robust construction; built to last (you definitely get what you pay for). - Functions well in relatively small sealed spaces (e.g., doors). - Pricing is very competitive with other mid/high end 6.5" woofers.
Cons: - Some customization may be required for door installations as mounting depth is deeper than most 6.5" woofers (worth the effort). - Pretty hefty at 6 lbs (mounting surface needs to be sturdy).
Great clear mid bass upgrade. Not going to shake or rattle you in the seat but fills in the bottom end nicely. Only issue is tuning them up with the amp and line converter using the stock HU as its easy to over power them and bottom them out. Use lots of sound deadening in side the mounting box.
Pros: Fit stock location with only new mounting holes required.
Cons: They are 6.5" not 8 or 10"
Nice surprised by the loudness from such small speakers.
Upon inspection i was very impressed with build quality,magnet structure,and with the tight suspension of this little beast.I have built a .18 cube removable kick pod for each kick panel in my hot rod.i have not wired them up ,but will be running a Sundown audio in 2 ohm mode at about 100-125 rms in the 55-250 hz range.I am now wiring an audio control sub eq,line driver,electronic x over.both kicks are padded and i am going to try with and without stuffing.I will post pics when finished.in this price range it was this semi high end oddity sub or two commercial alpine or low line ID 8" for the same price.i am glad i choose these just suprised to see such a fun sub discontinued,so buy them while their out.CDT or DD only ones left with good 6.5 subs,maybe Sundown.ill review after play and break in.hope their clean and tight.bye guys
Pros: Everything,considering their only 135 each.JL is a very well respected sub maker and these are w3 technology.good for kick subs,dont distort and over drive ,for that get two 8" commercial subs.
Another Quality product from JL. Good sound from a small package.
Pros: JL Quality, Good sound from small package, small space requirements
Awesome product put in the saddle bag of my harley for a little extra "punch"
Pros: Small easy to work with
What a great sounding sub . I have it under the rear seat in my 75 bmw 2002 powered by a linear power 452iq. I am amazed at the output of this sub in a small sealed enclosure
Pros: Great sound
The JL Audio is an impressive Subwoofer, It can get loud. Don't under estimate it. I would recommend this speaker to anyone with small room in the car.
Pros: Small and powerfull
I got this sub to replace my old factory sub from my 93 thunderbird and by long is way better then the old one really good base for been a 6 1/2 inches sub you won't get the power of a 8 or 10 inches sub
Pros: Good quality sub
This tiny sub sounds great. I am using it in my Fiero factory sub enclosure with the factory amp and it hits hard. I highly recommend this sub to anyone with space issues.
Pros: Size, minimum box space needed.
I purchased this sub as a replacement for my factory sub in my 2003 Maruader. Crutchfield would not say if the sub would fit, or if modifications would be required. As it turned out, I had to modify the factory sub box by cutting 2-2" holes with my holesaw to allow for the larger magnet structure, and there was some plastic below the old factory sub that I simply broke off with some pliars. Once this was done, the sub bolted right up, and I reinstalled the box. This sub made a significant improvement in both sould quality and loudness. The sound is tight, clear, and not boomy, which was my fear. The factory sub box seems to work fine after these modfications. I should mention that my car has a 100 watt factory amp for the sub, and I am very pleased with the result. I recently replaced all four factory 5 X 7" speakers with Polk DXI coaxials, and the entire system sounds great with the factory head unit. I've only had this installed in my car for a few days, so I can't comment on long term performance or durability.
Pros: This sub is built like a tank, with a huge magnet structure.
Cons: Had to modify the factory sub box.
I purchased two of these and built a ported enclosure between the rear seats of my 1994 Honda Prelude. The enclosure is approximately 1cuft, tuned to 38hz. They're running on my SAZ-1000D @ 2 ohm. Yes, the amp is overkill. I've had them installed for about a month now, and there are a few things that need to be said about them. First, they reach reasonably low for a 6" subwoofer. They are in no way suitable for midbass duties. They're decently loud in the enclosure I've built, but I wouldn't recommend putting these little guys in a sealed box because they just don't have the cone area to do anything noteworthy. They have very good sound quality and transient response. However, I think JL could have done a better job with these. For instance, I've had to repair the speaker twice already. A week after first powering them up, the decorative parabolic dust cap on the front began to separate from the cone underneath and making a lot of noise. Not a big deal, just ordered some CA glue and put it back together. Two weeks after that, the dust cap underneath (the real, functional dust cap), had come loose and made even more noise, so I had to remove the decorative cap again to repair the speaker. All in all, they're a good speaker for a tight space... just don't expect to beat the block down.
Pros: -Modest bass for a tight space -Sound quality -The "wow" factor of having a little boom with only 6" speakers -They look nice. Pointless, I know. -They bottom out long before they cook in my enclosure
Cons: -One of mine has broken twice. -Power hungry little guys -Expensive.
I was very nervous about the size and power of this little guy, but it sounds great. The bass is very fast and tight, and it adds a lot of punch to my wife's minivan. My wife has been complaining about the base toyota system for years so I finally broke down and treated her. I placed a downfiring 6w3 in a custom box that fit between the consol and the dash. I installed JL 6.5" C3's in my front doors with tweets in the dash and powered this stuff with a JL XD400-4. I also replaced the factory head unit with a JVC unit and powered my rear factory speakers with it. One warning with this sub is to watch your box size, I originally had this thing in the minimum .15 sealed box as stated on the JL website. Not great so I increased the box size to .18 cubic feet and away it went. Awsome sub for its size.
I drive a '93 Toyota MR2. if you anything about this car, you know that sapce is very limited. I upgraded my sub from a JL 6W0 to one of these. After instalation, and putting it through it's first run, it blew my mind and didn't burn a gaping whole in my wallet. I work construction, so I'm not the most experienced person when it comes down to the technical side of things but I have heard many diffierent sound systems and I like what I hear from mine. The enclosure I mounted the Sub in occupies a space of a couple of cubic feet and did not take any additional space that had already previously been used for the stock woofer. it's' an overall excellent product for the price.
I have been an audiophile who likes superior sound quality in my vehicles for the past 15 years and I have always been a JL Audio fan because of their superior sound quality. I was running 2 JL Audio 10's in my Toyota Tundra Crew max and decided to try out these 6W3's because I wanted to save a bit of space and get a tighter/cleaner mid-bass sound in my system. I took out one of my 10's and replaced it with 2 of these 6W3's running at 150 watts RMS each. My low pass crossover is set at ~120Hz and my high pass crossover is set at 30Hz for these bad boys. I was skeptical that I would get the performance I desired from speakers this small; however, I was pleasantly surprised. I must say that these things perform so well that I have my 10" sub switched off most of the time. One of my co-workers was so surprised at the performance of these little guys that he is planning to put 2 under his dash in the passenger footwell of his Toyota Tacoma (Yes, the box size required for these is that small). I definitely recommend these to anyone looking to add good quality bass to their system, especially if you don't have much space in your vehicle to put larger subs.
I bought one of these to mount in my Jeep Wrangler's factory location, I had to make some modifications to the factory box to make it work. When I got it running with a 150watts RMS from my MTX Thunder 202, I was amazed, now it's not 10" woofer, but for a factory location, it was amazing, louder and cleaner than most 8" woofers I have heard. I am very happy with my purchase and for it's size it is hard to beat.
Having recently bought a Porsche Boxster, I was very displeased with the factory system. I upgraded the head unit and door speakers with Crutchfield products, and it made great improvements in the quality of the sound, but it was still very deficient in the low end. A Boxster has NO room in the cabin for medium to large subs. The front trunk is well insulated and no sound escapes the space. (I put a 10" Kicker in there, and you couldn't hear it at all from inside the cabin). Between the rear trunk and the driver is the engine, so no need in trying that. My only recourse was to get something small and fit it inside the cabin. The airspace requirement of only .15cf is what drew me to the JL. I was VERY skeptical of a 6.5" sub. I'm used to 10's and 12's. But I thought I'd try it and whatever I got is what I would live with. I built a box that would fit the passenger footwell. When complete, it was so small it looked like a birdhouse. My son even laughed at me. That is, until I hooked it up. I was very surprised at the lows this little thing could crank out and the solid hit that it produced. And I'm still in the break-in mode! Can't wait to hear what it will really do. Nicest surprise I've had in a while. I'm gonna show my friends, let them laugh, then crank it up. If you have limited space, then this is your ticket. No way I would have ever believed it until I heard it.
I've got two of these in the front of my car along with a pair of SR6500s for my sound stage. These speakers did a lot more than I expected. The bass is so punchy and tight. They really shine in the 65-120Hz range. I actually have my two 12" Infinity subs turned off because I prefer the tightness these small subs produce. Great sub for SQ applications! They can't turn out the deep lows like a larger sub can but you can definitely feel them pounding away!
i have an 03 honda element and didn't want to spend all the money on the stealthbox. this little sub can take whatever you can dish at it. i would have never believed it if i had not heard it for myself. best option for this situation. highly recommend.
I added two of these subs to my 99 Mustang GT convertible and the lows are really filled out now. I had upgraded the factory Mach 550 system with a Pioneer head unit, Polk DBs, and an Apline PDX 4.150. This setup was not strong on the low end, and got lost with the top down. There's not much room in the car for an additional amp or subs without loosing trunk space (small as it is), so I added another Apline (PDX 2.150), which fits under the passenger seat, and two 6.5" JL subs. They use small enclosures (.15 cu.ft.), so I built ones that go behind the front seats. They take up some rear seat legroom, but there's still enough room to sit in the back. The subs point at the front seatbacks, so when you crank it up, you hear it and feel it.
|Size||6 1/2 -inch|
|Cone Material||Mineral-filled poly|
|Ideal Sealed Box Volume (cubic feet)||0.15|
|Ideal Ported Box Volume (cubic feet)||0.25|
|Port diameter (inches)||N/A|
|Port length (inches)||N/A|
|Dual Voice Coil||No|
80.49 dB at 1 watt
|Frequency Response||30 - 300 Hz|
|RMS Power Range (Watts)||40-150|
|Peak Power Handling (Watts)||300|
|Top Mount Depth (inches)||4 3/16|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||5 3/8|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Dynamic Motor Analysis (DMA): DMA is JL Audio's proprietary method aimed at improving dynamic motor behavior. As a result of DMA optimization, W3v3 motors remain linear in motor force over a very long range of excursion, and also maintain a highly stable fixed magnetic field in the gap over a wide power range. The result is vastly reduced distortion, faithfully reproduced transients, and tight, clean, articulate bass.
Floating Cone Attachment Method (FCAM): JL Audio's patented FCAM technology is an innovative method of bonding the surround/cone assembly to the voice coil/spider assembly. This assembly technique ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.
Vented Reinforcement Collar (VRC): The Vented Reinforcement Collar is a composite structure that addresses two issues related to reliability. By reinforcing the critical junction between the cone, voice coil and spider, the VRC greatly reduces failures due to glue breakdown or material weaknesses. It does this by greatly increasing adhesive contact area and providing stress relief to the spider material at excursion extremes. the VRC also feature slots that facilitate air flow directly onto the voice coil windings to reduce thermal compression effects and enhances reliability.
Spider/Lead Wire Assembly: The W3v3 features a unique spider, coil and terminal subassembly which is assembled prior to installation in the speaker frame for optimum alignment and glue-joint integrity. The spider is insert-molded into a composite carrier tray which also incorporates the terminal assembly and lead wire strain relief features for enhanced reliability and optimal alignment of parts. The flying lead wires are carefully controlled and strain-relieved without resorting to woven-in lead wires, which can degrade spider performance.
Elevated Frame Cooling: The elevated frame design of the W3v3 delivers high-velocity air flow through slots directly above the top plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.
Surround Stress Relief: By creating a radiused feature on the edge of the cone, stress is relieved from the surround material at maximum forward excursion, resulting in longer life and more consistent surround behavior.
Customizable Trim Ring: The woofer comes with a removable ring made of black ABS plastic which can be painted to match the installation theme and create a personalized look. You can purchase optional grille mesh inserts which are specifically designed to fit into the inner diameter of the trim ring.
Recommended Sealed Box Volume: The sealed box size recommended by JL Audio is 0.15 cu/ft. A diagram is provided in the owner's manual for a sealed box with external dimensions of 9" W x 9" H x 6.75" D, assuming 3/4" thick material. (If you are using 5/8" thick materials, you should subtract 1/4" from each dimension.)
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Good replacement for factory Bose Sub in console of my truck.[ Dirk Aug 18, 2017 ]
Just becuse of the size[ Galo Aug 03, 2017 ]
Small size and they will fit in the front door[ Shawn Jul 25, 2017 ]
JL reputation for quality products[ Michael Jun 01, 2017 ]
Rough fitment for "96 Town Car OEM (JBL) rear cabinet. Clearly some minor modification will be required, however the car was inexpensive and I am not currently disposed to exceed the purchase price with major audio upgrades. This speaker appears to have basic dimensions that I can make work, and various reviews on other make / model sites were encouraging.[ Greg May 23, 2017 ]
Fantastic small subwoofer[ john Mar 18, 2017 ]
good sound from a small sub. will fit in stock location.[ Nicholas Nov 04, 2016 ]
Good product[ Reginald Jun 17, 2016 ]
Replacement for mine that's blown[ Matthew F. May 12, 2016 ]
The JL Audio 6W3v3-4 is a subwoofer designed for use in a car audio system, so it's hard to envision how it would work as a replacement for your home audio Mirage sub. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question in greater detail.[ Larry Sep 13, 2017 ] Staff
i never heard of the speaker you speak of for car audio, The JL AUDIO 6,5 will rock! Money well spent[ john Sep 13, 2017 ]
Yes it will and that is a great idea I would get Crutchfield to hook you up with some fitted spacers and just make sure that it is airtight with no portEnter an answer to this question.[ Charles Sep 30, 2016 ]
I don't know. The actual measured dimensions and the cut sheet agreed.[ Gene Sep 28, 2016 ]
you would need to be much more specific.bazooka makes so many different tubes, and they all come with speakers in them, and have different sizes, and configurations. they're really ported and set up for the speakers they designed and come with, not some other random speaker you throw in there.[ evan Sep 28, 2016 ]
No, these are not marine speakers. They may be ok in Light moisture conditions. I use them in my Jeep Wrangler & have had no problems with them.[ JOHN Jan 30, 2016 ]
Have just 1 of these in the back of my soft top Jeep Wrangler. It is boxed per the specs outlined in the manual that came with the woofer. My top leaks every time it rains and soaks the entire area where it is located. This thing keeps on rocking. Have had no issues with the performance thus far.[ J. Scott Jan 29, 2016 ]
This is a 6" subwoofer. And it isn't water proof, but if it was mounted in an enclosure. It would be water resistant. It has a polymer cone with a rubber surround.[ Michael Jan 29, 2016 ]
II don't think that they are.[ Mark Jan 29, 2016 ]
I Can't say much on your first question but I purchased this for a land rover discovery rear doors and it was a tight fit. So it may be too large for a bike. Hope this helps somewhat.[ SIAFA Aug 11, 2015 ]
Rider, your question posts to customers like me that purchased the speakers. I'm no audiophile but I installed my speakers in a Mazda MX-6. For my application they are great subs. Know that the speakers are not water resistant so you would have to insure that rain and washing will not be an issue. Also know that these speakers need a sizable enclosure (speaker box) of which you may not have enough room to make. Check the instructions, I want to remember that they're online. I also want to remember the enclosure size is published there. I strongly suggest you call Crutchfield and present your question to them. They may have a better suggestion for you. I think you're on track considering JL speakers. I love mine and they out performed my expectations in my convertible. I'm very happy with them. No buyers remorse here. Best regards and drive safe.[ Roberto Aug 10, 2015 ]
Well, it depends on what your price range is. I'm running a 5 chanel amp in my vehicle, and the 5th channel is putting 200 watts to the sub. And it sounds great. So, look for an amp that makes 100-150 watts RMS. Since the spec's state 150 watts max. And it will sound great for you as well. If you want ideas for amps: Alpine MRX-M55, JL Audio JX500/1D, Kenwood Excelon X500-1, Alpine MRV-M500. Any of these will power it and make it sound good.[ Michael Dec 17, 2014 ]
XD700/5 - JL Audio 5-Channel 700W Class D Amplifier is the amp I used because I purchased JL speakers for the rest of my setup. This subwoofer was still small enough that it would fit in my factory subwoofer box and I wanted to improve the system but keep it looking like it came from the factory.[ Andres Dec 17, 2014 ]
Paul, unfortunately I was unable to use this sub and returned it. I bought two of these to install in the lower fairings on my motorcycles but they didn't fit. I was going to drive them with a Biketronics 180/channel amp. Based on the specs and my research, I would use about a 150 watt rpm amplifier.[ DAVID Dec 17, 2014 ]
If running just these subs I would use the JL Audio Slash 300/4v3. But if looking for an all around system amp. I went with the JL Audio XD700/5v2.[ JOHN Dec 17, 2014 ]
I am using a linear power 452iq. It is a old school cheater amp so I am not 100% sure of its output but it is rated @ 100 watts rms mono. I would use a clean power amp rated between 100-150 watts rms. Just make sure you are using a quality clean power amp. If you are looking for a new amp I would look at a jl xd300/1 or the focal f1.350 or for any old school amp by us amps or linear power[ cyclist01 Dec 16, 2014 ]